Product code RXSOL-40-4048-025Category Cooling Water Chemical

Price and availability on request. Send us the quantity and delivery location in Oman.

Overview

BIOCIDE ALGAECIDE effectively controls microorganisms (bacteria, fungi and algae) in industrial recirculating water systems

Product description

RXSOL ORG 7914  is a polymeric, cationic biocide that has been developed for controlling the growth of algae, bacteria, and fungi in recirculating water systems such as cooling towers, evaporative condensers, closed cooling water systems and industrial air-washing systems.

RXSOL ORG 7914 BIOCIDE ALGAECIDE is a powerful microbiocide which will control a wide range of troublesome microbes in both open and closed water systems.

Applications

Algae are microscopic plants that grow rapidly in cooling towers, spray ponds and other recirculating systems exposed to sunlight. These free-floating growths can be carried to the condenser or heat exchanger by the condenser or heat exchanger by the recirculating water where they lodge and act as binders for sludge and suspended matter. In addition, algae can contribute to the formation of slime deposits by providing organic matter necessary for the growth of bacteria. These biological growths restrict water flow, reduce heat transfer efficiency and increase head pressures, all of which result in lower efficiency and increased power and service costs. Treatment of recirculation water with RXSOL ORG 7914  Algaecide prevents growths of algae and bacteria from developing to the point where they cause the problems described.

Dosage

Initial Dosage: When the system is just noticeably fouled, slug 50- 150 ml  RXSOL ORG 7914 Biocide  Algaecide for each 4000 Ltrs of water in the system to provide a concentration of 16–40 ppm of  RXSOL ORG 7914 Biocide  Algaecide . Repeat until control is achieved.

Subsequent Dosage: Subsequent additions of 15-150 ml of RXSOL ORG 7914 Biocide  Algaecide per 4000 Ltrs of water (4–40 ppm) should be employed on a continuous basis through use of the RXSOL Wholesaler Drip Feeders. Use 1/6 of a gallon per month for every 50 gallon per hour of bleed off that is being maintained on the system and the recommended residual (4–40 ppm) will be achieved.

Also known as

Hydrex 7914, NALCO 8514-ALGAECIDE, Ferrocid 8583, Antifungal and Algae used in water cooling tower

Notes

Future & Benefit :

  • Controls the growth of algae, bacteria, and fungi in recirculating water systems.
  • Can be slug fed, drip fed or fed with a chemical solution pump.
  • Effective in both alkaline and acid waters.
  • Does not cause foam like most algaecides.
  • Non-volatile.

Where we supply

Oman. Stocked at our warehouse in Barka, South Al Batinah, and supplied to Muscat, Ruwi, Mutrah, Seeb, Rusayl, Barka, Sohar, Shinas, Saham, Buraimi, Nizwa, Ibri, Sur, Salalah, Duqm, Khasab and every other governorate.

Ports and free zones. Port Sultan Qaboos (Mutrah), Mina Al Fahal, Sohar Port and Freezone, Port of Salalah and Salalah Free Zone, Port of Duqm and the Duqm Special Economic Zone, Port of Sur, Khasab Port and Al Mazunah Free Zone.

Industrial areas. Rusayl, Sohar, Barka (Sanaya), Raysut (Salalah), Nizwa, Sur, Buraimi and Duqm industrial estates, Knowledge Oasis Muscat, and oil and gas sites across Oman.

Beyond Oman. We have branches in the UAE (including Fujairah) and in India (Kandla, Kolkata, Visakhapatnam, Chennai and Mumbai), and we also supply to South Africa.