Evaporator Treat

Important Formulation Considerations

The specified DEAE and Morpholine ranges allow a combined active concentration above 22%, but the selected formulation must actually meet that requirement.

Two other specifications require particular attention:

Flash Point Above 90°C: This must be verified by closed-cup testing of the finished blend. The presence of DEAE can materially affect flash point, and an aqueous formulation should not be assumed to meet this limit without testing.

Vapour Pressure 0.5 mmHg at 37.8°C: This also requires verification on the finished formulation because the individual amines and water contribute to the blend's vapour pressure.

The chloride and sulphate limits are very low and should be confirmed using appropriate analytical methods and high-purity raw materials.

Storage & Handling

Store in tightly closed, chemically compatible containers in a cool, ventilated area. Protect against contamination, excessive heat and incompatible chemicals.

Use appropriate gloves, protective clothing and eye/face protection. Consult the finished-product SDS before handling.

Regulatory note: DEAE and Morpholine use in steam systems may be restricted by steam end use, especially where steam can contact food or other regulated products.

RXSOL CHEMO PHARMA INTERNATIONAL Product: Neutralizing Amine for Steam & Condensate Systems Chemical Base: DEAE + Morpholine Website: www.rxmarine.com

Formulation note: Before issuing a final TDS or COA, the active concentration, flash point, vapour pressure, chloride, sulphate and shelf-life specifications should be validated on the actual manufactured blend.

RXSOL-51-5005-210 alkaline and the vapors are irritating to eyes and lungs. Avoid contact with eyes and skin. Do not take internally. Observe safety regulations wear Goggles, PVC gloves and Apron when handling Provide ample ventilation Avoid contact with skin in case of contacts wash with cupious amount of water immediately. If eyes are splashed give immediate and prolonged irrigation with clean running water and obtain medical attention.

Not for internal use :-
If swallowed do not induce vomiting give plenty of water or milk and call a doctor immediately.

Packing. GENERAL REMARKS:-Do not store  RXSOL-51-5005-210  near a heating equipment.

Important Formulation Considerations

The specified DEAE and Morpholine ranges allow a combined active concentration above 22%, but the selected formulation must actually meet that requirement.

Two other specifications require particular attention:

Flash Point Above 90°C: This must be verified by closed-cup testing of the finished blend. The presence of DEAE can materially affect flash point, and an aqueous formulation should not be assumed to meet this limit without testing.

Vapour Pressure 0.5 mmHg at 37.8°C: This also requires verification on the finished formulation because the individual amines and water contribute to the blend's vapour pressure.

The chloride and sulphate limits are very low and should be confirmed using appropriate analytical methods and high-purity raw materials.

Storage & Handling

Store in tightly closed, chemically compatible containers in a cool, ventilated area. Protect against contamination, excessive heat and incompatible chemicals.

Use appropriate gloves, protective clothing and eye/face protection. Consult the finished-product SDS before handling.

Regulatory note: DEAE and Morpholine use in steam systems may be restricted by steam end use, especially where steam can contact food or other regulated products.

RXSOL CHEMO PHARMA INTERNATIONAL Product: Neutralizing Amine for Steam & Condensate Systems Chemical Base: DEAE + Morpholine Website: www.rxmarine.com

Formulation note: Before issuing a final TDS or COA, the active concentration, flash point, vapour pressure, chloride, sulphate and shelf-life specifications should be validated on the actual manufactured blend.

RXSOL-51-5005-210 alkaline and the vapors are irritating to eyes and lungs. Avoid contact with eyes and skin. Do not take internally. Observe safety regulations wear Goggles, PVC gloves and Apron when handling Provide ample ventilation Avoid contact with skin in case of contacts wash with cupious amount of water immediately. If eyes are splashed give immediate and prolonged irrigation with clean running water and obtain medical attention.

Not for internal use :-
If swallowed do not induce vomiting give plenty of water or milk and call a doctor immediately.

Packing. GENERAL REMARKS:-Do not store  RXSOL-51-5005-210  near a heating equipment.

LIME Marine does not corrode, erode, attack, oxidize or have other deleterious affects on virtually any metal or materials found in marine water systems such as: BRASS, IRON, LEATHER, CERAMIC ,WOOD, FIBER, PLASTICS FIBERGLASS, COPPER, STEEL, TITANIUM ,COPPER NICKEL ,RUBBER, GLASS, GELCOATS PAINTED SURFACES.

LIME Marine is an electrolyte, as are most cleaning agents. An electrolyte is any liquid that will transfer small electrical currents. Examples: salt water, vinegar, Coca-Cola. An electrolyte may cause plating in some types of equipment. This means a transfer of small amounts of one metal onto another metal according to the galvanic corrosion chart. In some instances, a thin coating of copper may be plated onto a steel drum while circulating an electrolyte such as RXLYME Marine. The only time plating occurs is when two dissimilar metals are in an electrolyte solution.

It is recommended, but not mandatory, that the LIME Marine solution be thoroughly mixed before using. Some settling of a dark precipitate may occur, resulting in an amber colored liquid, but has no negative affects upon the performance of the solution.

RXSOL-51-6001-025 is a concentrated  solution of a POLYELECTROLYTE  polymer and Antifoaming Agents for  use in SEA WATER evaporator  as a controller of scale and foam in side the  evaporators.  It can be used as a scale inhibitor  in the  feed water  to EVAPORATORS producing fresh water .

A liquid polymer-based evaporator treatment specially designed to control and prevent scale formation in evaporators

Key Benefits for Maritime & Desalination Operations of AMEORL Evaporator Treatment Chemical:

RXSOL-51-6001-025 is a concentrated  solution of a POLYELECTROLYTE  polymer and Antifoaming Agents for  use in SEA WATER evaporator  as a controller of scale and foam in side the  evaporators.  It can be used as a scale inhibitor  in the  feed water  to EVAPORATORS producing fresh water .

A liquid polymer-based evaporator treatment specially designed to control and prevent scale formation in evaporators

Low dose levels, typically in the range 0.05 to 0.1 mg/l in the seawater feed stream, depending on feed water quality. Activity is not dependent on temperature. No need to alter dose level if top brine temperature (TBT) changes. Negligible steam volatility and carry over into the distillate.

RXSOL-16-2066-200 is antifoam emulsion and its more concentrated antifoam emulsion. It has excellent candidates for controlling foam in amine and glycol dehydration units. This is suitable products for gas plants and have excellent stability in the presence of salts, resulting in reduced deposits on the plant’s equipment. RXSOL-16-2066-210  help preserves foam control under the severe conditions of a dehydrating unit. These conditions can remove water from other antifoam emulsions, rendering them immediately inactive.

How to control excessive foaming in Seawater Distillation units?