Product code RXSOL-51-6001-025Category Evaporator Treat

Price and availability on request. Send us the quantity and delivery location in Oman.

Request infoGet MSDSGet technical bulletin

Overview

Neutral Liquid for prevention of scale in seawater Evaporators

Product description

VapourTreatment  For controlling of Scale & Foam ::: Neutral Liquid for prevention of scale in seawater Evaporators
This is a highly Active Antifoulant, Water Scale Inhibitor, Dispersant and Anti-precipitant compound for use in industrial and Marine Water systems, such as cooking systems, Heat Exchangers, air conditioning equipment, etc.

Applications

Procedure Of Use and Dose Rates: POLYELECTROLYTE  polymer  of RXSOL-51-6001-025 reacts with the potential scale forming salts in the water to prevent them from adhering to heat transfer surfaces. These solids are held in suspension and  easily removed  from  the evaporator  line. Finally RXSOL-51-6001-025 also have defoaming properties by which will stop foaming in EVAPORATOR. And by that way Distilled water quality is maintained in side the EVAPORATOR.

Used in both high and low pressure evaporators. 

Where it is used

Evaporator Treatment is used to stop scale buildup in high and low pressure evaporators system.

Industries and related products

Why Evaporator Treatment Chemicals must use?

PREVENTION OF SCALING IN SEA WATER EVAPORATORS.
RXSOL Vapor Treatment Prevents scale formation at temperatures up to 160°C Also Reduces foaming and maintains optimum plant performance.
 

During distilled water production in seawater evaporators, SCALE CONTROL is very important to increase efficiency of distillation as the seawater contains large quantities of salt which is resulting SCALE FORMATION in heat transfer surfaces.  Scale deposits Not only lower plant efficiency by resisting the transfer of heat, But also damaging instruments. Routine use of RXSOL Vapor Treatment prevents Scale formation in the Evaporator SYSTEM.

Whats the Dose Ratio of RXSOL VAPOR TREATMENT Chemicals?

Dilute the RXSOL VAPOR TREATMENT chemicals with water and continuously inject via evaporator inlet or the salt water supply lineand dose into the evaporator system. 30 ml Dose per ton of Seawater is recommended for the prevention of scaling in seawater evaporators. Dose can vary  depends on the capacity and the operating conditions of the evaporator.


RXSOL-51-6001-025 is identified as VAPTREAT / Vapor Treatment, a specialized evaporator treatment chemical for controlling scale and foam in seawater evaporators and fresh water generators. It is a concentrated polymer-based antiscalant and antifoulant designed for marine and industrial water systems. (rxsolgroup.com) (rx-sol.com)

RXSOL VAPTREAT is a neutral liquid treatment formulated with polyelectrolyte polymers and antifoaming agents to prevent scale formation and control foaming in seawater evaporators. It helps maintain clean heat transfer surfaces, improves evaporator efficiency, and ensures high-quality distilled water production. (rxmarine.com)

Key Benefits:

✔ Prevents scale formation in evaporators
✔ Controls foaming during distillation
✔ Improves distilled water quality
✔ Enhances heat transfer efficiency
✔ Reduces maintenance and downtime
✔ Suitable for both high and low-pressure evaporators

Applications:

  • Fresh Water Generators (FWG)

  • Seawater Evaporators

  • Marine Distillation Plants

  • Heat Exchangers

  • Industrial Water Systems

Dosage:

  • 10–20 MT/day output: 100–200 ml/day

  • 30–40 MT/day output: 300–400 ml/day

  • 50–60 MT/day output: 500–600 ml/day (rx-sol.com)

Note: for the gradual removal of existing scale deposits, at least twice the normal dose must be used. Remove deposits of more than 2mm, with Descalex Liqui

Dosage

Dosage :

Daily Out Put Evaporator Daily  RXSOL VT 6001 Requirement
10 -20 MT 100-200 ML
30-40 MT 300-400 ML
50-60 MT 500-600



Setting the Flow Rate: The treatment is added to the dosage tank and mixed with water. Example: With the 0.5 litres of Vaptreat add sufficient water to make up 50 litres of liquid.The standard flow meter is Adjustable-Rate=0-l00ml/minute.Flow rate calculation: Flowrate = 50 Litres/24 x 60= 35 ml/min setting  i.eThis will last 24 hours.

Note: We can remove  existing  mineral scale deposits  by using  A  5-10%  solution of  RXSOL-51-6001-025 Otherwise to save money and cleaning of HARD DEPOSITS which is formed due to not proper treratment of Evaporator, we have specialized Safe Scale Remover with Indicator ( Product code is RXSOL-22-2210-200 ).

Also known as

VapourTreatment L, VAPTREAT, VAP TREAT, Eazy Vapcare, Evaporator Treatment Chemical 25 Ltr

Notes

Evaporator Treatment Chemicals to protect deposition of SCALE in fresh water generator. RXSOL Vapor Treatment  is effective and concentrated ANTI-SCALE for water generator system. Improves the quality of distilled water. 

Remarks

RXSOL-51-6001-025 is a concentrated  solution of a POLYELECTROLYTE  polymer and Antifoaming Agents for  use in SEA WATER evaporator  as a controller of scale and foam in side the  evaporators.  It can be used as a scale inhibitor  in the  feed water  to EVAPORATORS producing fresh water .

A liquid polymer-based evaporator treatment specially designed to control and prevent scale formation in evaporators

Where we supply

Oman. Stocked at our warehouse in Barka, South Al Batinah, and supplied to Muscat, Ruwi, Mutrah, Seeb, Rusayl, Barka, Sohar, Shinas, Saham, Buraimi, Nizwa, Ibri, Sur, Salalah, Duqm, Khasab and every other governorate.

Ports and free zones. Port Sultan Qaboos (Mutrah), Mina Al Fahal, Sohar Port and Freezone, Port of Salalah and Salalah Free Zone, Port of Duqm and the Duqm Special Economic Zone, Port of Sur, Khasab Port and Al Mazunah Free Zone.

Industrial areas. Rusayl, Sohar, Barka (Sanaya), Raysut (Salalah), Nizwa, Sur, Buraimi and Duqm industrial estates, Knowledge Oasis Muscat, and oil and gas sites across Oman.

Beyond Oman. We have branches in the UAE (including Fujairah) and in India (Kandla, Kolkata, Visakhapatnam, Chennai and Mumbai), and we also supply to South Africa.