Primary tabs




Product Code ::RXSOL-60-6001-025
Product Description:

AMEROL Evaporator Treatment: Advanced Scale & Foam Control for Evaporators

What is AMEROL Evaporator Treatment?

AMEROL Evaporator Treatment is a specialized liquid formulation combining active polymer dispersants with a high-performance antifoam agent. It is designed to prevent scale deposition and foam formation in both high-pressure and low-pressure evaporators, particularly in marine, offshore, and desalination systems.

This dual-action treatment is essential for maintaining the efficiency, longevity, and reliability of seawater and freshwater distillation units.

AMEROL Evaporator Treatment   For controlling of Scale & Foam ::: Neutral Liquid for prevention of scale in seawater Evaporators
This is a highly Active Antifoulant, Water Scale Inhibitor, Dispersant and Anti-precipitant compound for use in industrial and Marine Water systems, such as cooking systems, Heat Exchangers, air conditioning equipment, etc.

Product Short Description: AMEROL Evaporator Treatment: Advanced Scale & Foam Control for Evaporators
Product Application:

Core Functions & Active Components of Amerol Evaporator Treatment Polymeric Scale Inhibition

The treatment contains low molecular weight polymers that interfere with the crystal growth of common scale-forming compounds such as:

  • Calcium carbonate (CaCO₃)

  • Magnesium hydroxide (Mg(OH)₂)

  • Calcium sulfate (CaSO₄)

These polymers disperse particles into a non-adherent sludge form, making them easily removable via blowdown.

Procedure Of Use and Dose Rates: POLYELECTROLYTE  polymer  of RXSOL-51-6001-025 reacts with the potential scale forming salts in the water to prevent them from adhering to heat transfer surfaces. These solids are held in suspension and  easily removed  from  the evaporator  line. Finally RXSOL-51-6001-025 also have defoaming properties by which will stop foaming in EVAPORATOR. And by that way Distilled water quality is maintained in side the EVAPORATOR.

Used in both high and low pressure evaporators. 

Product Dose:

Amerol Evaporator Treatment Chemicals is Integrated with Antifoam Agent

Foaming can disrupt evaporator operation and result in carryover of salts, reduced throughput, and corrosion. AMEROYAL includes an organosilicone-based antifoam, ensuring smooth, uninterrupted operation by:

 

  • Reducing surface tension

  • Preventing bubble formation

  • Stabilizing evaporator operation at high loads

Dosage :

Daily Out Put Evaporator Daily  RXSOL VT 6001 Requirement
10 -20 MT 100-200 ML
30-40 MT 300-400 ML
50-60 MT 500-600



Setting the Flow RateThe treatment is added to the dosage tank and mixed with water. Example: With the 0.5 litres of Vaptreat add sufficient water to make up 50 litres of liquid.The standard flow meter is Adjustable-Rate=0-l00ml/minute.Flow rate calculation: Flowrate = 50 Litres/24 x 60= 35 ml/min setting  i.eThis will last 24 hours.

Note: We can remove  existing  mineral scale deposits  by using  A  5-10%  solution of  RXSOL-51-6001-025 Otherwise to save money and cleaning of HARD DEPOSITS which is formed due to not proper treratment of Evaporator, we have specialized Safe Scale Remover with Indicator ( Product code is RXSOL-22-2210-200 ).

Product Note:

Where to Use AMEROL Evaporator Treatment Chemical?

This treatment is ideal for:

  • Marine evaporators aboard ships and offshore rigs

  • Thermal desalination units (MSF, MED)

  • Industrial brine concentration systems

  • Freshwater generators in coastal and remote facilities

Industrial area:

Why AMEROL Evaporator Treatment Chemicals must use?

PREVENTION OF SCALING IN SEA WATER EVAPORATORS.
RXSOL Vapor Treatment Prevents scale formation at temperatures up to 160°C Also Reduces foaming and maintains optimum plant performance.

 

During distilled water production in seawater evaporators, SCALE CONTROL is very important to increase efficiency of distillation as the seawater contains large quantities of salt which is resulting SCALE FORMATION in heat transfer surfaces.  Scale deposits Not only lower plant efficiency by resisting the transfer of heat, But also damaging instruments. Routine use of RXSOL Vapor Treatment prevents Scale formation in the Evaporator SYSTEM.

Whats the Dose Ratio of RXSOL VAPOR TREATMENT Chemicals?

Dilute the RXSOL VAPOR TREATMENT chemicals with water and continuously inject via evaporator inlet or the salt water supply lineand dose into the evaporator system. 30 ml Dose per ton of Seawater is recommended for the prevention of scaling in seawater evaporators. Dose can vary  depends on the capacity and the operating conditions of the evaporator.
Note: for the gradual removal of existing scale deposits, at least twice the normal dose must be used. Remove deposits of more than 2mm, with Descalex Liqui
Remarks:

Key Benefits for Maritime & Desalination Operations of AMEORL Evaporator Treatment Chemical:

 

Feature Benefit
Dual-action (scale + foam control) Simplifies chemical dosing and inventory
Liquid form Easy to handle, mix, and dose
Compatible with high salinity water Effective even in extreme seawater conditions
High thermal stability Reliable at elevated temperatures in flash evaporators
Environmentally safe formulation Meets marine discharge compliance standards
Improves evaporator throughput Fewer shutdowns, more water output per hour

 

RXSOL-51-6001-025 is a concentrated  solution of a POLYELECTROLYTE  polymer and Antifoaming Agents for  use in SEA WATER evaporator  as a controller of scale and foam in side the  evaporators.  It can be used as a scale inhibitor  in the  feed water  to EVAPORATORS producing fresh water .

A liquid polymer-based evaporator treatment specially designed to control and prevent scale formation in evaporators

Other Equivalent Brand:

Ameroyal CF 25 Ltr

Product Tag Identification:
Product Useful Area:

Amerol evaporator treatment is a liquid combination of  polymers with antifoam, which helps to avoid scale deposits in high and low-pressure evaporators. Amerol Evaporator Treatment  is effective in seawater, brackish, and fresh water, and can also be used to remove existing scale deposits. 

 

BENEFITS of Amerol Evaporator Treatment Chemicald Prevents scale and minimizes acid cleaning in high temperature evaporators

Images: Alt

Keyword:

Dosing & Application of Ameorl Evaporator Treatment Chemical:

  • Dosage Rate: Typically 5–50 ppm, depending on feedwater quality and evaporator type

  • Dosing Method: Continuous dosing using a metering pump into the evaporator feed line

  • Monitoring: Regular monitoring of scale thickness, conductivity, and foam levels recommended

 

Note: Exact dosage should be determined by your technical service provider or according to system design parameters.

 

AMEROL Evaporator Treatment is a liquid combination of active polymer and antifoam used to prevent scale deposition in high and low-pressure Evaporators. A liquid mixture of active polymer and antifoam. 

packaing_size:

AMEROL Evaporator Treatment Chemicals supplier in Mumbai, Kandla - Deen Dayal Upadhyay Port, Gandhidham, Chennai - Ennore, Visakhapatnam - Gangavaram, Kolkata - Haldia, Paradip, Fujairah, Dubai, Sharjah, Ajman, AbuDhabi - Middle East - UAE., Nairobi Kenya Africa, CANADA, Ruwi Barka Muscat Oman

Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates