Alt
on 28 Feb 2020 8:40 AM
  • Veg and Animal Oil Cleaner Manufacturer in Oman

Oman Chemical is leading one Largest Supplier, Manufacture and Exporter of Tank Cleaner like Veg and Animal Oil Cleaner in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman,Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.
Veg and Animal Oil Cleaner is a very strong cleaner, which can be used to soften up Veg and Animal Oil Cleaner remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils, tung oil etc. It is low toxic product with an exceptional solvency power on soil & oily matter.It is free from Hydrocarbon solvents, Biodegradable and minimizes the extreme hazards to personnel in handling materials.These are highly acknowledged due to their accurate composition and effectiveness.
For effective cleaning of animal and vegetable oils the first cleaning step is of utmost importance. Vegetable oils are divided in:

  • Non-drying products
  • Semi-drying products
  • Drying products
  • Fatty acids Non Drying Products

Direction for Use:

  1. Butterworth the tank with seawater or freshwater with a temperature 20°C. above the melting point of the product to be cleaned. After sufficient pre-cleaning of at least 1.5 hours the temperature can be increased. Drying and Semi-drying ProductsThese are oxidising products and through reaction with oxygen they will dry and harden. Tank cleaning should be executed as soon as possible after discharge. High temperatures (e.g. cleaning or steaming) and heated cargoes in adjacent tanks should be avoided.
  2. Butterworth the tank with cold to warm seawater or freshwater.If the product has a higher melting point Butterworth the tank with seawater or freshwater with a temperature maximum 10°C above the melting point of the product.After sufficient pre-cleaning of at least 1.5 – 2 hours the temperature can be increased. Fatty Acids or vegetable/animal oils with high free fatty acid contentsee the cleaning suggestion of Fatty Acids.
  3. If seawater was used in step 1 it is of utmost importance to flush/rinse the tank with freshwater before cleaning as per step 3 is continued.
  4. (Final cleaning)Prepare the following solution (A) in freshwater:Solution A(emulsification) 0. 4 % RXSOL CTC-VOLC Butterworth the tank with the prepared solution for 1, 5-2, 0 hours by recirculation. The necessary temperature can be achieved / maintained by means of heating coils, cargo heat exchanger or Butterworth heater. Depending on the amount of product residues the solution can be used for 1 to 4 tanks.On some vegetable/animal oils it is recommended to saponify additionally the product residues: Therefore prepare one of the following solutions (B or C) in freshwater: Solution B 0.4 % RXSOL CTC-VOLC plus 2.5% Potassium Hydroxide (KOH) or Sodium Hydroxide (NaOH) Solution C 0.4 % RXSOL CTC-VOLC plus 2 – 5% RXSOL AL 2005
  5. continuedButterworth the tank with the prepared solution for 1, 5-2, 0 hours by recirculation. The necessary temperature can be achieved/maintained by means of heating coil (service tank) cargo heat exchanger or Butterworth heater.If RXSOL CTC-VOLC is used the cleaning temperature should be 60-700 CIf Sodium or Potassium Hydroxide is used the cleaning temperature should be 600C.If RXSOL AL 2005 Marine is used the cleaning temperature can be 70-800 C. Depending on the amount of product residues the solution can be used for 1 to 3 tanks.
  6. Butterworth the tank 1 hour with hot seawater
  7. Rinse the tank with fresh water
  8. Inspect the tank; if white residues or a white film is present (calcium/magnesium soaps or carbonate) Butterworth the tank with one the following solution: 3-5% phosphoric acid and 0.4% RXSOL CTC-VOLC (stainless steel only); or 3-5% nitric acid and 0.4% RXSOL CTC-VOLC (stainless steel only); or 5-10% citric acid and 0,4% RXSOL CTC-VOLC (also suitable for Epoxy Coatings) or 2% P3 T1166 Marine and 0,4% RXSOL CTC-VOLC (also suitable for Epoxy Coatings) The cleaning temperature should be moderate (50°C.) Use heating coils not the Butterworth heater.
  9. Flush the tank with fresh water
  10. Ventilate, mop and dry the cargo tank.

Available packing size:  10, 20, 25, 210 Ltrs..
Oman Chemical offers highest quality products in Tank cleaning, Hold Solution, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce superior range of Veg and Animal Oil Cleaner using advanced manufactured technology and using superior quality raw materials. We assure for quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of Veg and Animal Oil Cleaner, for more information, any support and price, Feel free to contact us through our Email id theomanchem@gmail.com