Watch on YouTube: Car & Truck Underbody Cleaning: One Spray, One Rinse, No Brushing | RXSOL AlUSolve

TL;DR

  • An acid-based aluminium cleaner removes oxidation, road film and diesel grime from underbodies with one spray and one rinse, no brushing.
  • Dilute AlUSolve with water: 1:5 for heavy oxidation, 1:10 for medium cleaning, 1:20 for light upkeep.
  • Spray from the bottom up, leave it for 1 to 2 minutes, then rinse thoroughly with high-pressure water.
  • It contains hydrofluoric and sulphuric acid: trained crews only, with rubber gloves, goggles or face shield, and a rubber apron.
  • Keep it off glass and polished aluminium, and never mix it with other cleaners.

An acid-based aluminium cleaner takes oxidation and road film off aluminium trailers, wheels and dirty truck frames with one spray and one high-pressure rinse, without brushing. RXSOL AlUSolve Aluminium Cleaner (Trailer Wash), part number RXSOL-41-4133-025, is the grade we supply for chassis frames, wheels and aluminium trailers.

The video above shows the full wash-bay sequence. This page sets out the same steps in writing: the dilution for each job, the dwell time, the rinse, and the safety rules that come with a product made with hydrofluoric and sulphuric acid.

Why underbodies need an aluminium cleaner

Road film, diesel smoke and grime bake onto the metal under a vehicle, and bare aluminium oxidises to a chalky white crust. That crust builds up on trailer sides, chassis frames and wheels between washes.

Scrubbing it off by hand takes hours per vehicle. An acid-based cleaner loosens the oxide and the grime chemically, so the rinse water does the removal and the metal comes up evenly clean.

What AlUSolve aluminium cleaner does

AlUSolve is a heavy-duty, acid-based product made for industrial and institutional use only. It removes oxidation and road film without agitation, needs no brushing or rubbing, and brightens the surface uniformly.

It also cuts the grime on wheels and on extremely dirty truck frames. The product page for AlUSolve Aluminium Cleaner (Trailer Wash) carries the part number, and you can ask for the MSDS from there.

ItemAlUSolve Aluminium Cleaner (Trailer Wash)
Part numberRXSOL-41-4133-025
TypeHeavy-duty acid-based aluminium cleaner (hydrofluoric and sulphuric acid; MSDS also lists 2-butoxyethanol)
ApplicationChassis frames, wheels, extremely dirty truck frames, aluminium trailers
Dilution with water1:5 heavy oxidation and grime; 1:10 medium cleaning; 1:20 light upkeep
Dwell time1 to 2 minutes
MethodAcid-resistant sprayer, plastic pails or automatic injector; apply bottom up; high-pressure water rinse
PPERubber gloves, goggles or face shield, rubber apron
Do not use onGlass (etches it), polished aluminium; do not mix with other cleaners
Packing25 L, 210 L
MSDSOn request

Aluminium cleaner dilution and method, step by step

Mix AlUSolve with water to suit the condition of the metal, spray it on from the bottom up, wait 1 to 2 minutes and pressure-rinse.

  1. Prepare the vehicle. Mask the windows, lights and any other glass, because the product etches glass. Keep polished aluminium parts out of the wash.
  2. Put on PPE. Rubber gloves, goggles or a face shield, and a rubber apron, before you open the container.
  3. Mix in plastic only. Use plastic pails or an automatic injector line. The acid reacts with metals and gives off hydrogen, so never mix it in a metal container.
  4. Choose the ratio. 1:5 for heavy oxidation and heavy grime, 1:10 for medium cleaning, 1:20 for light upkeep.
  5. Spray from the bottom up. Use an acid-resistant sprayer and work upward over the frame, underbody and panels.
  6. Let it work for 1 to 2 minutes. Treat one section at a time and do not let the solution dry on the metal before you rinse.
  7. Rinse thoroughly with high-pressure water. Work across the surface in overlapping passes until every treated area is rinsed.

If the underbody is already heavily fouled

Start at the strongest mix, 1:5, which is the ratio for heavy oxidation and heavy grime. Treat and rinse the worst areas first, such as the chassis rails and the wheel discs, then move to the panels.

Once the vehicle is clean, drop to 1:10 or 1:20 for regular washes. Each wash then removes a thin film of road dirt instead of a baked crust, and your crew uses less product per vehicle.

Safety: a strong acid for trained crews

AlUSolve contains hydrofluoric and sulphuric acid and should be used by trained personnel only. The MSDS warns that it causes severe burns to eyes and skin and may be fatal if swallowed.

  • Wear rubber gloves, goggles or a face shield, and a rubber apron.
  • Keep it off glass, because it will etch it. Mask windows and lights before spraying.
  • Do not use it on polished aluminium.
  • Never mix it with other cleaners.
  • Mix and apply from plastic pails or injectors, never metal containers.

Other aluminium cleaner grades we list

Underbody washing is one job among several. We also list Aluminium Cleaner for radiator and AC coil cleaning, a second coil grade, Aluminium Cleaner RXSOL-16-1028-025, an Aluminium Cleaner for air lines (RXSOL-16-1028-020) and an automotive Aluminium Cleaner (RXSOL-16-1028-002).

Tell us the surface and the dirt you are removing, and we will tell you which grade fits. The full list is on our products page.

Where to buy aluminium cleaner in Muscat and Oman

Oman Chem (Muscat & Barka for Business Trading) supplies AlUSolve in 25 L and 210 L packs from Barka Industrial Area, Sultanate of Oman. Ask us about supply to your wash bay, workshop or fleet yard.

Call +968 77333599 or message us on WhatsApp. Our sister site also lists a general aluminium cleaner.

Frequently asked questions

What dilution should I use for heavy oxidation?

Use 1:5 for heavy oxidation and heavy grime. Drop to 1:10 for medium cleaning and 1:20 for light upkeep once the vehicle is clean.

Do I need to brush the underbody?

No. AlUSolve removes oxidation and road film without agitation. Spray it on from the bottom up, leave it for 1 to 2 minutes and rinse with high-pressure water.

Can I use it on polished aluminium wheels or near glass?

Do not use it on polished aluminium. It etches glass, so mask windows and lights before you spray.

What protective equipment does the crew need?

Rubber gloves, goggles or a face shield, and a rubber apron. The product contains hydrofluoric and sulphuric acid and is for trained crews only.

What pack sizes are available?

AlUSolve comes in 25 L and 210 L packs. Ask us for the MSDS with your quote.