Product Code ::RXSOL-81-8101-050
Categories: Drilling Fluids & Mud Oil Field chemicals-81
Product Short Description: Maximum swelling property, while combine with water, Our fine quality of sodium bentonite having more water absorption capacity then ordinary one.
Product Description:

Bentonite Supplier for Oil Field Industries. It is a drilling-grade Bentonite which is naturally occurring clay. It is a High Yield Natural Sodium montmorillonite. It meets API 13A Standards. Bentonite, is a very fine grind material mostly a composite of clay minerals, especially montmorillonite which chemically describes as hydrous alumina-silicate and contains small amounts of alkali and alkali-earth metals.

Product Application:

• It is Viscosifier and Filtration control agent for water based Mud Systems.
• It is used in drilling muds for controlling bore hole stability. It is utilized in drilling muds to extract drill cuttings from the bit.
• It is also used for clearing cat litter

Bentonite, sometimes refer as sometimes referred to as Montmorrilonite is a naturally occurring substance, composed of a number of layers, each approximately 10 angstroms thick, and each consisting of two tetrahedral and one octahedral unit. This structure is responsible for three important characteristics, the ability to absorb large amounts of moisture, the ability to exchange ions and thixotropic gel formation.
 

Bentonite Powder
We are reputed as one of the most overruling Bentonite Mineral Powder Manufacturers and Suppliers in India. The unmatched quality and efficacy of Bentonite Powder in various sectors like Drilling, Effluent Treatment, Electrical, Engineering, Fertilizer, Foundry, Iron ore Pelletization, Liquor & Food, Pesticides and Pharmaceutical has played a vital role in the enhancement of the demand. Moreover, Bentonite Clay Powder is available in varied grades.
 
Application
Drilling
Effluent Treatment
Electrical
Engineering
Fertilizer
Foundry
Iron ore Pelletization
Liquor & Food
Pesticides
Pharmaceutical
Product Dose:
Bentonite can be Broadely classified in 2 grades :
 
Granular: Granular is the preferred option for filling trenches where the conductor is covered with Bentonite and then water poured over and mixed in the trench.
 
Powder: Powder is the preferred method for pouring into bore holes to en-sure the mixture is of a thin enough consistency to reach the bottom of the bore hole. If diamond drilling is required for deep holes, possible 40m depths and deeper and the Bentonite is to be pumped through the core in to the hole, then powder would be the preferred option.
 
The greatest application of bentonite in industries is the result of its swelling property, while combine with water able to perform multitude jobs. The sodium bentonite having more water absorption capacity makes it suitable for industries like Foundry and Civil engineering application and the calcium bentonite absorb lesser than Sodium still it has some special application like cosmetics, paper, Animal feed binder as many more to describe. Swell Well Mine Chem drilling grade Bentonite is basically a sodium bentonite acquired naturally from the mines. The mineral is processed using the advanced chemical technology for drilling from ores. The below features highlights the quality of the Swell Well Mine Chem Drilling Bentonite, Offers impermeability, Provides high barrel yield. Bentonite is valued in foundry sand binding, drilling mud and sealing agent in civil engineering works, bentonite is used as a mud constituent for oil and water well drilling. Swell Chem Mine is offering Bentonite products for drilling industry. What is Drining Bentonite ? Drilling Bentonite is the Bentonite formed to be used in drilling mud or fluid.
Product Note:

Advantage

• It helps improve hole cleaning capacities of drilling fluids.
• It is effective as a filtering agent.
• It promotes borehole stability.
• It can be added directly to fresh water or fresh water based drilling fluids.

Remarks:

 

Physical State

:Free Flowing Powder

Viscometer Dial reading at 600 r/min

: Min 30

Yield Point/Plastic Viscosity Ratio

: Max 3

Residue of diameter greater than 75um

: Max mass friction 4,0%

Filtrate Volume

: Max 15.0 Cm3

Moisture

: 10% wt percent max
Product Tag Identification:
Product Useful Area:

Keyword:

Various grade of Bentonite :::

Drilling Grade 1

API 13A Section – 9 Grade Bentonite Powder:

Physical Analysis:

PROPERTIES

PROTOCOL

UNIT

REQUIRED

RESULT

Viscometer Dial Reading at 600 rpm

API Spec. 13A:2004/ ISO 13500: 1998

r/min

30

36

Yield Point / Plastic Viscosity Ratio

API Spec. 13A:2004/ ISO 13500: 1998

_

3 Max

2.5

Filterate Volume

API Spec. 13A:2004/ ISO 13500: 1998

ML

15 Max

14.6

Moisture Content

API Spec. 13A:2004/ ISO 13500: 1998

% by weight

10.0 max.

10

Dry Screen Analysis(Residue Greater than 75 Microns)%

API Spec. 13A:2004/ ISO 13500: 1998

% by weight

4.0 max.

3.0 - 4.0
 Drilling Grade API Packing 25 Kgs 

 

IOP Grade Bentonite lumps :

Properties

Protocol

Unit

REQUIRED

Moisture Content

API Spec. 13A:2004/ ISO 13500: 1998

% by wt.

12% to 40 % max. 

LOI

IS:2000(P-1)-1985

% by wt.

5 – 10.

Free Swelling Volume 2gm/100ml

ASTM D 5890:1995

ml 

32 min.

PH Value of 5% gel 

IS:6186-1986

pH

8.0 – 10.0

Plate Water Absorption  (16 hours)

ASTM E 946

%

720- 760

Gel Time 2.5gm/25 ml

IS:12446-1988

second

Instant

Methylene Blue Value

API spe 131:2004/ ISO 10416:2002

mg/gm of clay

350 - 400 

Lumps size

IS:6186-1986

%

10 to 40 m.m.

Chemical specification:                                           

Alumina as AL2O3%>15.0-19.0                                 Sodium max 2.70

Calcium as  Cao%1.5-2.0                                           Na2O      2.0-2.5

Mgo  2.5-3.5                                                            iron as Fe2o3% 13.0-18.0

 

IOP Grade Lumps | 25 Kg Packing 

Product: Benotonite Powder for Grouting

Physical Analysis:

Properties

Protocol

Unit

Result

Liquid Limit

IS:12446-2007

ml/100 gm

350 - 450

Moisture Content

API Spec. 13A:2004/ ISO 13500: 1998

% by wt.

12.0 Max

Dry Screen Analysis (passing through 75 um sieve)

IS:12446-2007

% by. Wt.

85.0 min.

Free Swelling Volume 2gm/100ml

ASTM D 5890:1995 or IS:12446-2007

ml 

30 min

PH Value of 5% gel 

IS:12446-2007

pH

9.5  - 10.0

Gel Time 2.5gm/25 ml

IS:12446-1988

second

Instant

Filterate Volume

API Spec. 13A:2004/ ISO 13500: 1998

ml

20 max

Viscosty at 600 rpm

API Spec. 13A:2004/ ISO 13500: 1998
 

30 min

Methylene Blue Value

API spe 131:2004/ ISO 10416:2002 / IS:12446-2007

mg/gm of clay

350 - 400
 
Grouting Grade | 25 Kg Packing
 


PRODUCT: Ceramic Grade Bentonite Powder

Physical Analysis:

Properties

Protocol

Unit

Result

Free Swelling Volume 2 gm/100ml

IS:12446-2007

ml

12 - 18

Base Exchange Capacity

IS:12446-2007
 

70 - 80

Moisture Content % by weight

IS:12446-2007

%

10.0 - 12.0

PH Value  2% slurry

IS:12446-2007

0pH

8 - 9

Quartz Content

IS:12446-2007

%

2 - 3 %

Dry Mesh % Passing 200 B.S.S

IS:12446-2007

%

85 Minimum

 
Ceramic Grade  | 25 Kg Packing

<

packaing_size:

Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates