Primary tabs

on 13 Jun 2020 9:53 AM
  • Tall Oil (Crude rosin) Cleaner Manufacturer in Oman

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of Tall Oil (Crude rosin) Cleaner in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:

Tall Oil (Crude rosin) Cleaner:RXSOL-20-2041-210

Product Application:
Tall Oil (Crude Cleaning Procedure)
Tall oil is an oxidizing oil and through reaction with oxygen of the atmosphere
it dries and hardens (drying oil). Oxidation occurs in three phases: liquid, gum
and solid. Tank cleaning should be therefore executed as soon as possible after discharge.
 1.   Butter worth the tank 1 hour with hot seawater (60-70° C.)
 2.   Butter worth the tank 1 hour with hot seawater (75° C.). Check if the tank is free of sediments before recirculation cleaning will be started.
 3.    Flush the tank 10 minutes with fresh water to remove the residues of seawater.                                                                        
 4.    Prepare on of the following cleaning solution with fresh water :
                 0.4% RXSOL CTC -VOLC
                 0.4% RXSOL CTC-VOLC
                 2.5% Sodium or Potassium Hydroxide
                 5% RXSOL AL 2005
    5.    Butter worth the tank 1, 5 hour by recirculation.                                    
    6.    Butter worth the tank 1 hour with hot seawater (70-80° C.) Rinse the tank
           with freshwater  
    7.    Butter worth the tank 1 hour with hot seawater (70-80° C.)
    8.    Rinse the tank with freshwater
    9.    Ventilate, mop and dry the tank. Inspect the tank: Depending on the
           Fatty Acid and Resin Acid content of the Crude Tall Oil it might be
           possible that some minor spots of sticky brownish residues are present.
   10.  To remove these residues Butter worth the tank with one of the following solution:
                      3-5% phosphoric acid and 0.4% RXSOL CTC-VOLC; or
                      3-5% nitric acid and 0.4% RXSOL CTC VOLC; or
                       2-5% of a metallic brightener (RXSOL MB 1011) and 0.4% RXSOL CTC- VOLC The cleaning temperature should be moderate (50°C.) Use heating coils not the Butter worth heater.
   11.  Butter worth the tank 0, 5 hours with fresh water
   12.  Ventilate, mop and dry the tank. Tall oil is an oxidizing oil and through
          reaction with oxygen of the atmosphere it dries and hardens (drying oil).
          Oxidation occurs in three phases: liquid, gum and solid. Tank cleaning should
          be therefore executed as soon as possible after discharge.
   13.  Butter worth the tank 1 hour with seawater (60-70°C.)
   14.  Butter worth the tank 1 hour with hot seawater (75°C.). Check if the tank is
          free of sediments before recirculation cleaning will be started.
   15.  Flush the tank 10 minutes with fresh water to remove the residues of  
           seawater.
   16.  Prepare one of the following cleaning solutions with fresh water.
                             0.4% RXSOL CTC-VOLC or alternatively
                             0.4% RXSOL CTC-VOLC
                             2.5% Sodium or Potassium Hydroxide
                             5% RXSOL AL 2005 Butter worth the tank 2.0 hour by recirculation. The cleaning temperature should be approx 60°C (not higher).
   17.  Butter worth the tank 1 hour with hot seawater (70-80°C.)
   18.  Rinse the tank with freshwater
   19.  Ventilate, mop and dry the tank continued Inspect the tank: Depending on the Fatty Acid and Resin Acid content of the Crude Tall Oil it might be possible that some minor spots of sticky brownish residues are present.
   20.  To remove these residues Butter worth the tank with one of the following solution:
                        3-5% phosphoric acid and 0.4% RXSOL CTC -VOLC; or
                        3-5% nitric acid and 0.4% CTC-Cleaner-VLC; or
                        2-5% of a metallic brightener (RXSOL MB 1011) and 0.4% RXSOL CTC   VOLC The cleaning temperature should be moderate (50°C.) Use heating coils not the Butter worth heater.
   21. Butter worth the tank 0, 5 hours with freshwater
   22. Ventilate, mop and dry the tank


Product Note:

Product Technical Specification:

Available Packing Size: 210 Ltr.


Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of Tall Oil (Crude rosin) Cleaner using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of Tall Oil (Crude rosin) Cleaner Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id
theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.