Key Benefits for Maritime & Desalination Operations of AMEORL Evaporator Treatment Chemical:

RXSOL-51-6001-025 is a concentrated  solution of a POLYELECTROLYTE  polymer and Antifoaming Agents for  use in SEA WATER evaporator  as a controller of scale and foam in side the  evaporators.  It can be used as a scale inhibitor  in the  feed water  to EVAPORATORS producing fresh water .

A liquid polymer-based evaporator treatment specially designed to control and prevent scale formation in evaporators

Low dose levels, typically in the range 0.05 to 0.1 mg/l in the seawater feed stream, depending on feed water quality. Activity is not dependent on temperature. No need to alter dose level if top brine temperature (TBT) changes. Negligible steam volatility and carry over into the distillate.

RXSOL-16-2066-200 is antifoam emulsion and its more concentrated antifoam emulsion. It has excellent candidates for controlling foam in amine and glycol dehydration units. This is suitable products for gas plants and have excellent stability in the presence of salts, resulting in reduced deposits on the plant’s equipment. RXSOL-16-2066-210  help preserves foam control under the severe conditions of a dehydrating unit. These conditions can remove water from other antifoam emulsions, rendering them immediately inactive.

Low dose levels, typically in the range 0.05 to 0.1 mg/l in the seawater feed stream, depending on feed water quality. Activity is not dependent on temperature. No need to alter dose level if top brine temperature (TBT) changes. Negligible steam volatility and carry over into the distillate.

RXSOL-51-2066-220 is antifoam emulsion and its more concentrated antifoam emulsion. It has excellent candidates for controlling foam in amine and glycol dehydration units. This is suitable products for gas plants and have excellent stability in the presence of salts, resulting in reduced deposits on the plant’s equipment. RXSOL-51-2066-220  help preserves foam control under the severe conditions of a dehydrating unit. These conditions can remove water from other antifoam emulsions, rendering them immediately inactive.

Clog Controller Biocide RXSOL-40-4009-050 should be dosed periodically at a rate of 75 - 150 ppm of the total system volume. In a badly fouled system an initial dosage rate of up to 250m1/m3 may be required which can be reduced once control is gained.In order to comply with Health & Safety recommendations Clog Controller Biocide RXSOL-40-4009-050 should be alternated with another non-oxidising or oxidizing biocide. It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.

Propylene glycol is tolerated well by the skin and shouldn't cause redness or irritation. Propylene glycol is a penetration-enhancing humectant.
 

Propylene Glycol USP is a widely used ingredient in pharmaceutical, food, cosmetic, personal care, flavors and animal feed applications; an overview of typical uses of Propylene Glycol USP as below.It must be emphasized that it is the user’s responsibility to consult area and country-specific regulations for details of approved use.

1. Pharmaceuticals - Solvent for active ingredients in oral, and topical products.
    
2. Cosmetics & Personal Care - Solvent, coupling agent, carrier, emulsion stabilizer, softening agent, viscosity modifier and humectant in many types of cosmetics and personal care products such as skincare, sun care, shampoo, bath/shower products, toothpastes, mouthwashes, shaving products and baby care products.
    
3. Flavors & Fragrances - Solvent and extraction solvent of flavors and fragrances for applications in food, beverages, perfumes and cosmetics.
    
4. Food - Various applications as a direct food additive (E 1520) such as a carrier or carrier solvent for colors, emulsifiers, antioxidants and enzymes (in Europe with maximum 1 g/kg in human foodstuffs), and humectant and stabilizer in fruits, vegetables and bakery goods (except in Europe). Propylene Glycol USP is also applied in indirect contact food applications, such as a low temperature heat-transfer fluid in the brewing, dairy and ice cream industries and for food storage facilities, an equipment cleaner fluid or a solvent for printing inks.
    
5. Pet foods & Animal Feed - Humectant, emulsifier, preservative, solvent foradditives, energy source and aid for prevention of ketosis (acetonemia) in dairycattle. In EMEA a specific tailor made Propylene Glycol Animal Feed is offered forthis application.

Suggestion ::: Our daily descaling works helps to share helpful tricks to dissolve hard scale easily, Always use 5-10 %  our new generation hard scale deposit remover powder RXSOL-11-1102-025 . Addition of RXSOL-11-1102-025 helps to clean 100% scale from system .