Your shopping cart is empty.
Scales are very damaging to the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture , To increas usable life of cleaned equipment , it is safe and effective way to remove scale deposits from all types of water-cooled and water-heated equipment. This descaler specifically formulated and developed to rapidly clean mineral scale from passages in water-cooled or heated equipment. It improves Plant Efficiency, Lowers Cost, Conserves Energy, Decreases Down-Time.
It does not contain toxic cresols or other tar oils that Require SARA Title III, Section 313 spill loss or disposal.
Do not use concentrated 1008 on aluminium surfaces
Uniqueness of 1008 :: --
RXSOL 1008 Descaler has the ability to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning. The uniqueness of this Descaler allows you to clean some equipment while still in operation utilizing a minimum of your own personnel.
RXSOL-11-1008-020 is mixed with fresh water 3 to 20 percent depending on deposition of scaling.
The most effective method is circulation for large systems or components like boilers, evaporators, condensers, heat exchangers and generally closed systems that have the capability to circulate at a temperature of approximately 40-60°C, for 6-12 hours and solutions of 5-40% of RXSOL-11-1008-020 in water. Keep in mind that the strength of the solution is analogous to the degree of deposition of scale .
In case of small components , the soak method in an immersion bath can be used.
If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all clean the system with degreaser RXSOL-10-1005. RXSOL-11-1008-020 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-11-1008-020 ,
PRECAUTION :::it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of RXSO-20-2005 in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.
RXSOL-11-1008-020 should not be used on Aluminium, Zinc, Tin, or any Galvanized Surfaces for which a special grade cleaner should be used. Chemical Cleaning Module Rx cleansers has developed a 280 litres capacity cleaning module, primarily designed for use with chemical acid solvents for descaling boilers, calorifiers, heat exchangers & other types of equipment where rust & scale form RXSOL-11-1008-020 Boilers, See Rx cleansers Practical Application Manual
After using RXSOL-11-1008-020, sense all metal surfaces with 0.5 percent of RXSOL-10-1005, at least 2-4 hour , up to neutral of PH value.
• Fast and effective scale remover.
• Soft on ferrous metals.
• Removes water scale & rust from boilers/diesel engine & other cooling system
• As well as from condensers, evaporators, & heat exchangers etc
Why Use RXSOL Descaler?
India's largest scale claner manufacturer with multi location stock point. DESCALING Chemical manufacturer and supplier in Kolkata, Mumbai, Surat, Gandhidham, Vizag, Chennai, Dubai, Fujairah...
34022090
ScaleX Pro Descaling Liquid is a powerful and effective liquid descaler specially formulated to rapidly remove mineral scale, lime deposits, calcium carbonate, rust, and other hard-water deposits from water-cooled and water-heated equipment. Regular scale buildup reduces heat-transfer efficiency and can increase energy consumption, maintenance requirements, and the risk of equipment overheating.
Rapid removal of mineral scale and lime deposits
Suitable for water-cooled and water-heated equipment
Helps restore heat-transfer efficiency
Effective for boilers, condensers, heat exchangers, pipelines, tanks, filters, and reactors
Suitable for industrial, commercial, and process equipment
Available in multiple pack sizes, including 20, 25, 50, and 210 Litre packaging.
ScaleX Pro Descaling Liquid can be used for cleaning:
Boilers
Condensers
Heat exchangers
Cooling systems
Filters
Pipelines
Kettles and tanks
Reactors
Steam jackets
Pumps
Radiators
Industrial water-heated equipment
It is suitable for applications across the pharmaceutical, refinery, rubber and plastics, steel, textile, automotive, chemical, food-processing, and other industrial sectors.
Removing scale deposits helps equipment operate more efficiently by restoring clean heat-transfer surfaces.
Regular descaling helps reduce equipment downtime and the need for intensive mechanical cleaning.
By removing damaging mineral deposits, ScaleX Pro helps maintain the operating efficiency and service life of equipment.
Its broad application range makes it suitable for a wide variety of water-cooled and water-heated systems.
ScaleX Pro Descaling Liquid provides an efficient solution for removing stubborn mineral deposits from industrial equipment and water systems. Its rapid descaling action helps improve equipment performance, reduce energy losses caused by scale buildup, and support reliable industrial operations.
ScaleX Pro Descaling Liquid – an effective solution for industrial scale removal and equipment maintenance.
ScaleX Pro Descaling Liquid, Industrial Descaler, Descaling Chemical, Liquid Scale Remover, Boiler Descaler, Heat Exchanger Descaler, Condenser Cleaning Chemical, Lime Scale Remover, Mineral Scale Remover, Industrial Descaling Chemical, Water-Cooled Equipment Cleaner, Boiler Cleaning Chemical, Heat Transfer Equipment Descaler.
Descaling Liquid 2 Ltr
LIME-OUT, DESCALER MTA, DESCALE IT, DESCALER, DESCALER LIQUID 555, Phosphoric Descaler, Descaling Liq 50 Ltr
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...