Product code RXSOL-41-9005-025Category RO Chemicals

Price and availability on request. Send us the quantity and delivery location in Oman.

Overview

High performance liquid antiscalant and dispersant for controlling inorganic scale formation and particulate fouling in Reverse Osmosis (RO) membrane systems.

Product description

RXSOL RO Antiscalant 9005 – High Performance Reverse Osmosis Membrane Scale Inhibitor

Product Name: RXSOL RO Antiscalant 9005
Brand: RXSOL – RX Marine International
Product Category: Reverse Osmosis Chemicals / Membrane Scale Inhibitors / Water Treatment Chemicals
Application: Industrial RO Plants, Brackish Water RO, Seawater RO, Desalination Plants and Water Recycling Systems

Proposed RXSOL product designation. Product code and performance specifications require confirmation.

Product Description

RXSOL RO Antiscalant 9005 is a proposed high-performance liquid antiscalant and dispersant for controlling inorganic scale formation and particulate fouling in Reverse Osmosis (RO) membrane systems.

The product is intended to minimize the deposition of sparingly soluble salts, including calcium carbonate, calcium sulfate, barium sulfate and strontium sulfate, while assisting in the dispersion of suspended inorganic particles and metal oxide contaminants.

RXSOL RO Antiscalant 9005 is designed for use in industrial RO plants treating groundwater, surface water, brackish water, seawater and suitably pretreated industrial effluent.

Its proposed treatment approach combines scale inhibition, crystal growth modification and dispersant action to help maintain membrane cleanliness and reduce mineral scaling.

Applications

Applications of RXSOL RO Antiscalant 9005

1. Industrial Reverse Osmosis Plants

Intended to help prevent mineral scale accumulation on RO membrane surfaces in industrial water purification systems.

2. Brackish Water RO Systems

Designed for scale management in brackish groundwater treatment plants containing elevated concentrations of calcium, magnesium, sulfate and other dissolved minerals.

3. Seawater Desalination Plants

Suitable as a development candidate for seawater RO applications where high salinity and scaling potential require specialized chemical treatment.

4. Wastewater Recycling and Reuse

Can be evaluated for RO systems treating suitably pretreated industrial effluent, where variable water chemistry may increase scaling and particulate fouling risks.

5. Boiler Feedwater Preparation

Intended for RO pretreatment systems supplying purified water to industrial boilers and steam generation facilities.

6. Power Plants and Process Industries

Potential applications include RO systems in power generation, petrochemicals, refineries, manufacturing facilities and industrial utilities.

Mechanism of Action

RXSOL RO Antiscalant 9005 is intended to work through three principal mechanisms.

Threshold Inhibition: Antiscalant molecules interfere with the nucleation and growth of mineral scale, helping prevent precipitation at low treatment concentrations.

Crystal Modification: The formulation interferes with crystal development, reducing the tendency of scale-forming minerals to form adherent deposits.

Dispersion: Dispersant components help keep selected inorganic particles suspended in the flowing water, reducing their tendency to accumulate on membrane surfaces.

Industries and related products

How the Formulation Works

HEDP: Provides threshold inhibition against calcium carbonate and other selected inorganic deposits.

PBTC: Contributes scale inhibition and helps manage metal-ion interactions.

Polyacrylate: Helps modify crystal growth and disperse suspended inorganic particles.

PPCA: Provides additional scale inhibition and dispersant performance, particularly useful when developing broad-spectrum formulations.

The combination is intended to address multiple scaling mechanisms rather than relying on a single active ingredient.

Dosage

Recommended Dosage and Application

1–6 ppm of neat product, with injection upstream of the cartridge filter.

For RXSOL product development, this range may be used as an initial performance-testing target, but it is not yet a validated RXSOL dosage.

Feedwater Condition

Dosing Recommendation

Low scaling potential

Establish through water analysis

Moderate scaling potential

Determine using scaling calculations

High hardness / sulfate concentration

Conduct detailed antiscalant evaluation

High silica concentration

Verify silica limits and treatment performance

High recovery RO system

Evaluate concentrated reject-water chemistry

Dosage Calculation

For a liquid product, when dosage is expressed in mg/L:

Dosing Rate (L/h) =     Q X D  / 1000 X Product Density

Where:

  • Q = RO feedwater flow in m³/h

  • D = required product dosage in mg/L

  • Product density in kg/L

RO Antiscalant Dosing Calculator


Antiscalant dosage = 3 mg/L
 


Then Neat product feed ::: 0.136 L/h

Neat product per day ::: 3.27 L

Illustrative calculation assuming continuous operation for 24 hours. Density of 1.10 kg/L is an example, not a measured RXSOL specification. Actual dosage must be established from feedwater analysis.

Application Procedure

  1. Analyze RO feedwater for calcium, magnesium, alkalinity, sulfate, silica, barium, strontium, iron, pH and total dissolved solids.

  2. Determine the intended membrane recovery rate and operating temperature.

  3. Calculate scaling potential at the concentrate end of the RO system.

  4. Select and validate the antiscalant dosage.

  5. Install the dosing system at a location that provides adequate mixing before the membranes.

  6. Monitor differential pressure, normalized permeate flow, salt rejection and cleaning frequency.

NOTE ::: Do not combine concentrated antiscalant directly with other treatment chemicals unless compatibility has been established.

Also known as

Thermax MAXTREAT 9005 Reverese Osmosis Antiscalant

Notes

Scale Deposits Targeted

Scale or Deposit

Intended Treatment Function

Calcium Carbonate (CaCO₃)

Threshold scale inhibition

Calcium Sulfate (CaSO₄)

Crystal growth inhibition

Barium Sulfate (BaSO₄)

Scale formation control

Strontium Sulfate (SrSO₄)

Scale inhibition

Silica (SiO₂)

Scale management and dispersion

Iron Oxides

Particulate dispersion

Other Metal Oxides

Fouling reduction through dispersion

Actual performance must be established using the selected formulation, feedwater analysis and membrane operating conditions.

Remarks

Frequently Asked Questions

Q1. What is RXSOL RO Antiscalant 9005?

It is a proposed liquid antiscalant and dispersant intended for controlling inorganic scale formation in Reverse Osmosis membrane systems.

Q2. What types of scale can RO antiscalants control?

Appropriately formulated antiscalants can inhibit calcium carbonate, calcium sulfate, barium sulfate and strontium sulfate. Silica control requires additional formulation-specific validation.

Q3. What is the recommended dosage?

The reference product uses 1–6 ppm. The final RXSOL dosage must be determined through feedwater analysis and product performance testing.

Q4. Where should antiscalant be injected?

Normally into the RO feedwater line before the membrane system, at a point allowing adequate mixing and consistent chemical distribution.

Q5. Can the product be used in seawater RO plants?

A suitable antiscalant can be used in seawater RO systems, but membrane compatibility, salinity and scaling performance must be verified for the final formulation.

Q6. Does antiscalant remove existing membrane scale?

No. Antiscalants are primarily preventive chemicals. Existing deposits generally require an appropriate membrane-cleaning procedure.

Where we supply

Oman. Stocked at our warehouse in Barka, South Al Batinah, and supplied to Muscat, Ruwi, Mutrah, Seeb, Rusayl, Barka, Sohar, Shinas, Saham, Buraimi, Nizwa, Ibri, Sur, Salalah, Duqm, Khasab and every other governorate.

Ports and free zones. Port Sultan Qaboos (Mutrah), Mina Al Fahal, Sohar Port and Freezone, Port of Salalah and Salalah Free Zone, Port of Duqm and the Duqm Special Economic Zone, Port of Sur, Khasab Port and Al Mazunah Free Zone.

Industrial areas. Rusayl, Sohar, Barka (Sanaya), Raysut (Salalah), Nizwa, Sur, Buraimi and Duqm industrial estates, Knowledge Oasis Muscat, and oil and gas sites across Oman.

Beyond Oman. We have branches in the UAE (including Fujairah), India (Kandla, Kolkata, Visakhapatnam, Chennai and Mumbai), Kenya (Nairobi) and Canada, and we also supply to South Africa.