Price and availability on request. Send us the quantity and delivery location in Oman.
Overview
Antimicrobial used for reverse osmosis water treatment to Eliminate most microbial growth Stable, broad spectrum
Product description
Isothiazolinone based ProShield PC55 RO Biocide bactericide an antimicrobial and preservative used in a wide variety of applications, such as bactericide for reverse osmosis water treatment.
Non-oxidizing antimicrobial formulation developed for microbial control in reverse osmosis (RO) water treatment systems. It is based on glutaraldehyde, a broad-spectrum biocidal active ingredient effective against bacteria, fungi, algae and other microorganisms.
The product helps control microbial contamination, biofilm formation and biological fouling in RO pretreatment and compatible membrane systems. It is suitable for use in industrial water treatment applications where microbial growth can reduce membrane performance, increase differential pressure and affect permeate production.
The formulation is intended for controlled biocide treatment, system sanitization and microbial growth management, subject to membrane-material compatibility and manufacturer recommendations.
Applications
For Shut Down longer than as 24 hrs, Biological growth in the RO system should be controlled. This requires the introduction of a chemical to kill bacteria and prevent growth. Any Preservation chemical would then have to be rinsed out from the system when it is restarted.
Where it is used
Where to use Reverse Osmosis BIOCIDE?
- Reverse osmosis pretreatment systems.
- RO feedwater storage tanks.
- Raw water storage and distribution systems.
- Water treatment pipelines and circulation loops.
- Industrial process water systems.
- Microbial growth control in compatible water injection systems.
- Biological contamination control in selected membrane-related equipment.
Dosage
Flow Rate during flushing should be based on the recommended cleaning instruction flow rates. This is normally 30-40 gpm ( 6.8 to 9.1 m3/ Hr ) per pressure vessel.
Flushing time should be long enough for the conductivity out to equal the conductivity in. Typically 15 - 20 minutes.
If the permeate flush is unavailable, feed water can be used by allowing low pressure water to replace the water within the system by delaying the inlet valve closing. Scale inhibitor should be turned off during the permeate flush.
if the temperature in the RO Membrane system more then 115 degree fahrenheit, flush water should be continiously passed through the system to prevent memebrane degradation.
Also known as
RO Chemical Permaclean PC-55, Reveres Osmosis System BIOCIDE and Preservative
Notes
This chemical quickly biodegrades.
With a shelf time of one year when stored at room temperature in a dark, air-tight, and moisture-proof place.
Isothiazolinone Biocide is high performance, broad spectrum, antimicrobial agents based on the proven isothiazolone chemistry. Isothiazolinone Biocide 14% is excellent Isothiazolinone biocide and Oilfield Bactericide. They are effective at very low concentrations in controlling both the planktonic and surface growth of bacteria, fungi and algae and have been produced specifically for water treatment and paper mill applications. It could be used Isothiazolinone in water treatment and Oilfield Bactericide applications
The bactericidal effect of Isothiazolinones Biocide Cooling Water Treatment is carried out through breaking the bond between bacteria and algae protein. When contacted with microbes,Isothiazolinone can quickly inhibit their growth, thus leading to death of these microbes.Isothiazolinones has strong inhibition and biocidal effects on ordinary bacteria, fungi and alga, and has many advantages such as high biocidal efficiency, good degradation, noresidual, safety in operation, good compatibleness, good stabilization, low cost in operation.
Application :
Isothiazolinone as chemical biocide algaecide is ideally suited to meet the requirements of an industrial water treatment biocide and excellent Isothiazolinone biocide. Isothiazolinone 14% microbicide is not deactivated by suspended organic matter, and is compatible with other water treatment additives, including chlorine. With the recent change of many cooling towers and paper mills to alkaline operating conditions, it is important to use a biocide such as Isothiazolinone 14% which remains stable at higher pH values. Isothiazolinone 14% is of low toxicity at use levels, easily deactivated and biodegradable.
-Used as sludge stripper
-Used as biocide
-Used in waste water treatment in oilfield
-Cosmetic
-Papermaking
-Pesticide
-Leather
-Detergent
Application Field / Industry :
- Adhesive industry
- Construction industry
- Gypsum, plaster and mortar
- Laundry and cleaning agents
- Lubricant/coolants
- Paint and coatings industry
- Paper manufacture
- Technical suspension/emulsion
- Textile and leather industry
- Water treatment
Dose :
When used as sludge stripper for grade II, the dosage of 150-300mg/L is preferred, when used as boicide, the dosage of 80-100mg/L is preferred, and charges every 3-7 days. No used together with oxidative fungicidal such as chlorine, and no used in cooling water system containing sulfur. When used together with quaternary amine, the effect will be better. When used as industrial fungicide, the dosage of 0.05-0.4% is preferred.
Technical Specification :
| Appearance | Light yellow liquid |
| Active Ingredient | 14% |
| Viscosity | 16 cps @ 25°C |
| pH | 2.0-4.0 |
| Specific Gravity (g/ml) at 20°C |
1.27-1.33 |
| 5-Chloro-2-Methyl-4-Isothiazoline-one |
10.1 - 11.3 |
| Magnesium (%) | 4.2 - 5.5 |
| 2-Methyl-4-Isothiazoline-3-one | 3.0 - 4.1 |
Storage & Handling
Do not store in direct sunlight. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Keep container tightly closed. Avoid ingestion and inhalation.
Remarks
Isothiazolinone is high performance, broad spectrum, antimicrobial agents based on the proven isothiazolone chemistry. It is excellent Isothiazolinone biocide and Oilfield Bactericide. They are effective at very low concentrations in controlling both the planktonic and surface growth of bacteria, fungi and algae and have been produced specifically for water treatment and paper mill applications. It could be used Isothiazolinone in water treatment and Oilfield Bactericide applications
The bactericidal effect of Isothiazolinones is carried out through breaking the bond between bacteria and algae protein. When contacted with microbes,Isothiazolinones can quickly inhibit their growth, thus leading to death of these microbes.Isothiazolinones has strong inhibition and biocidal effects on ordinary bacteria, fungi and alga, and has many advantages such as high biocidal efficiency, good degradation, noresidual, safety in operation, good compatibleness, good stabilization, low cost in operation.
Where we supply
Oman. Stocked at our warehouse in Barka, South Al Batinah, and supplied to Muscat, Ruwi, Mutrah, Seeb, Rusayl, Barka, Sohar, Shinas, Saham, Buraimi, Nizwa, Ibri, Sur, Salalah, Duqm, Khasab and every other governorate.
Ports and free zones. Port Sultan Qaboos (Mutrah), Mina Al Fahal, Sohar Port and Freezone, Port of Salalah and Salalah Free Zone, Port of Duqm and the Duqm Special Economic Zone, Port of Sur, Khasab Port and Al Mazunah Free Zone.
Industrial areas. Rusayl, Sohar, Barka (Sanaya), Raysut (Salalah), Nizwa, Sur, Buraimi and Duqm industrial estates, Knowledge Oasis Muscat, and oil and gas sites across Oman.
Beyond Oman. We have branches in the UAE (including Fujairah), India (Kandla, Kolkata, Visakhapatnam, Chennai and Mumbai), Kenya (Nairobi) and Canada, and we also supply to South Africa.





