Price and availability on request. Send us the quantity and delivery location in Oman.
Overview
Penetrating Oil A very strong cleaner, which can be used to soften up / remove baked on drying oils and Hard coke asphaltic deposition etc. It is low toxic product with an exceptional solvency power on soil & oily matter . It is minimizes the extre
Product description
RXSOL Mould Lubrication Oil is a specially formulated industrial lubricant designed to provide effective lubrication between mould surfaces and the material being processed. It forms a thin, uniform lubricating film that helps minimize friction, sticking and material adhesion during moulding operations.
The product facilitates smooth mould release, reduces surface defects and helps maintain the cleanliness of mould surfaces. Its lubricating properties help reduce wear caused by repeated moulding cycles and contribute to improved operational efficiency.
It is suitable for industrial moulding applications where controlled lubrication and easy release of finished products are required.
Applications
Areas of Application
- Industrial mould lubrication.
- Concrete moulds and formwork applications, subject to substrate compatibility.
- Precast concrete moulds.
- Cement product manufacturing.
- Industrial casting and moulding operations.
- Mould surfaces requiring lubrication and release assistance
Dosage
How to use Mould Lubrication Oil?
Step 1 - Surface Preparation
- Ensure the mould surface is clean and free from concrete deposits, dust, rust and other contaminants.
- Remove any residual hardened material before applying the lubricant.
Step 2 - Application
- Apply RXSOL Mould Lubrication Oil directly onto the mould surface using a spray gun, brush, roller or clean cloth.
- Spread evenly to form a thin, continuous lubricating film.
- Avoid excessive application and accumulation of oil in corners or depressions.
Step 3 - Moulding Operation
- Allow the applied film to distribute uniformly over the mould surface.
- Proceed with the moulding or casting operation as per the production process.
- Ensure that excess oil is removed before introducing the moulding material.
Step 4 - Maintenance
- Clean the mould after each production cycle, where necessary.
- Reapply the lubricant before the next moulding operation.
Also known as
Mould Lubrication Oil
Notes
Key Features of Mould Lubrication Oil
- Effective Lubrication: Creates a lubricating film on mould surfaces to minimize friction.
- Easy Mould Release: Helps prevent sticking and facilitates removal of moulded products.
- Surface Protection: Helps reduce direct contact and wear between moulding surfaces.
- Reduced Surface Defects: Promotes smoother release and helps minimize surface damage.
- Operational Efficiency: Supports consistent moulding operations and reduces cleaning frequency.
- Mould Conditioning: Helps maintain mould surfaces during repeated production cycles.
Where we supply
Oman. Stocked at our warehouse in Barka, South Al Batinah, and supplied to Muscat, Ruwi, Mutrah, Seeb, Rusayl, Barka, Sohar, Shinas, Saham, Buraimi, Nizwa, Ibri, Sur, Salalah, Duqm, Khasab and every other governorate.
Ports and free zones. Port Sultan Qaboos (Mutrah), Mina Al Fahal, Sohar Port and Freezone, Port of Salalah and Salalah Free Zone, Port of Duqm and the Duqm Special Economic Zone, Port of Sur, Khasab Port and Al Mazunah Free Zone.
Industrial areas. Rusayl, Sohar, Barka (Sanaya), Raysut (Salalah), Nizwa, Sur, Buraimi and Duqm industrial estates, Knowledge Oasis Muscat, and oil and gas sites across Oman.
Beyond Oman. We have branches in the UAE (including Fujairah) and in India (Kandla, Kolkata, Visakhapatnam, Chennai and Mumbai), and we also supply to South Africa.