Product code RXSOL-20-2046-220Category Tank Cleaner

Price and availability on request. Send us the quantity and delivery location in Oman.

AlkalineTuff Veg Oil Cleaner supplier and manufacturer in Oman

In short: AlkalineTuff Veg Oil Cleaner is our concentrated, water-based alkaline cleaner for vegetable oil and animal fat residues. We manufacture this RXSOL formulation and are the largest AlkalineTuff Veg Oil Cleaner supplier in Oman. We keep it in stock at our Barka warehouse in 25 L cans, 210 L drums and 1000 L IBCs. It is used for marine cargo tank, storage tank and pipeline cleaning. We deliver to Muscat, Sohar, Salalah and Duqm. Send us your quantity on WhatsApp for today's price.

When does a vegetable oil tank need cleaning?

After cargo discharge, inspect the tank and associated lines before preparing them for the next cargo. AlkalineTuff Veg Oil Cleaner helps remove:

  • Oily films left by palm, soybean, sunflower, coconut and other vegetable oils.
  • Fatty deposits from animal fats and fish oils.
  • Residues from tall oil and tung oil, including baked-on drying oils.
  • Grease and oily deposits on tank surfaces, pipelines and industrial equipment.

Its alkaline builders, surfactants, emulsifiers and dispersants break down and disperse oily matter during washing. It contains no intentionally added hydrocarbon solvents.

AlkalineTuff Veg Oil Cleaner dose for marine tank cleaning

Use these concentrations as starting trials in fresh water. The cargo residue, tank coating and washing equipment determine the final cleaning plan.

Your situationMethodInitial trial concentration
Vegetable oil film in a cargo or storage tankRecirculation through tank-washing machines2 to 5%
Heavy animal fat or oily depositsHeavy-duty cleaning5 to 10%
Accessible greasy tank surfacesSpray cleaning5 to 10%
Localised stubborn depositsSpot cleaning10 to 20%

For example, a 2% solution uses 2 litres of cleaner in 100 litres of finished solution. Use a strainer at the pump stack when circulating the solution.

Step by step: cleaning a ship cargo tank after vegetable oil

  1. Review the cargo-specific cleaning plan and the coating manufacturer's concentration and temperature limits. Remove free oil and recover remaining cargo residues.
  2. Prewash promptly after discharge. For drying and semi-drying oils, start with cold water to reduce hardening of the residue.
  3. If you used seawater for the prewash, rinse the tank with fresh water before the alkaline wash.
  4. Prepare a fresh-water solution at the trial concentration selected for the job. Recirculate it through the tank-washing machines.
  5. Gradually raise the temperature, typically to 50 to 65 °C where the cargo, coating and equipment permit.
  6. Rinse thoroughly and inspect the tank for oily film or white deposits. Complete a fresh-water rinse, ventilate and dry the tank.
  7. Verify the tank's cleanliness against the next cargo requirements.

The cleaner is suitable for stainless steel and approved alkali-resistant coatings, subject to the coating manufacturer's limits. For epoxy and phenolic linings, establish compatibility with the planned concentration and temperature.

Mistakes to avoid when washing vegetable oil tanks

  • Starting a drying-oil wash hot. Drying and semi-drying oils can harden on exposure to heat and air. Begin the prewash cold and avoid delay after discharge.
  • Leaving seawater in the tank before the alkaline wash. Fresh-water rinsing between those steps helps reduce hardness-related deposits.
  • Treating every white film as oil. Calcium or magnesium soaps and carbonate deposits can leave a white film. Identify the deposit before choosing a separate treatment.
  • Adding caustic or acid from a generic recipe. The cargo, tank lining and equipment determine whether a separate treatment is suitable.
  • Applying a procedure for another product without checking it. A separate procedure in the product information names a different RXSOL product. Contact us before using its 0.4% dose for AlkalineTuff Veg Oil Cleaner.

Safety, storage and MSDS

Wear chemical-resistant gloves, eye and face protection and protective clothing. Avoid skin and eye contact and exposure to spray. Follow the vessel's enclosed-space entry and ventilation procedures, and manage wash water under applicable vessel and local requirements.

Keep containers closed and store away from incompatible materials. Read the current MSDS for the product's hazards, first aid and storage instructions: press "Get MSDS" at the top of this page to request it.

AlkalineTuff Veg Oil Cleaner or another product?

  • Vegetable oil and animal fat residues in cargo tanks: AlkalineTuff Veg Oil Cleaner is our water-based alkaline choice for the wash.
  • Vegetable oil residues and hard stains: consider Tankleen VO RX when the tank also has hard stains.
  • Palm fatty acid residues: Palm Fatty Acid Cleaner is another product to consider for a cargo-specific cleaning plan.
  • Caustic-assisted cleaning: Caustic Soda Flakes may be used in a separately established procedure for suitable residues and compatible equipment.

AlkalineTuff Veg Oil Cleaner price and quotation in Oman

The price depends on the pack, quantity and delivery point. We stock 25 L cans, 210 L drums and 1000 L IBCs at Barka. To buy, send the quantity, pack and location on WhatsApp +968 7733 3599 or through the quote form. Bulk and wholesale buyers get volume prices. We deliver from Barka to Muscat, Sohar, Salalah and Duqm, including ships at Port Sultan Qaboos, Sohar Port, Salalah Port and Duqm.

Overview

Powerfull suitable animal and vegetable oils for cleaning tanks after transportation or storage of palm oil, soybean oil, sunflower oil, coconut oil and other vegetable oils.

Product description

Product Description

RXSOL Alkaline Vegetable Oil Cleaner is a concentrated, water-based alkaline cleaning chemical designed for removing vegetable oil residues, animal fats, fatty deposits and greasy contamination from marine cargo tanks and industrial surfaces.

The formulation combines alkaline builders, surfactants, emulsifying agents and dispersants to break down oily residues and improve their removal during hot-water circulation and tank washing.

It is particularly suitable for cleaning tanks after transportation or storage of palm oil, soybean oil, sunflower oil, coconut oil and other vegetable oils.

A very strong cleaner, which can be used to soften up / remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils, tung oil etc.  It is low toxic product with an exceptional solvency power on soil & oily  matter. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials. For effective cleaning of animal and vegetable oils the first cleaning step is of utmost importance. 

AlkalineTuff Veg Oil Cleaner Heavy duty water based alkaline cleaner and degreaser, specially formulated for cleaning tanker vessels after vegetable oils, animal oils, fatty acids, fish oils, greasers, waxes, oil, sludge, soot carbon deposits, and general dirt and grime.

RXSOL Alkaline Vegetable Oil Cleaner

Heavy Duty Alkaline Tank Cleaner for Vegetable Oils, Animal Fats & Greasy Residues

 

Brand: RXSOL
Product Name: Alkaline Vegetable Oil Cleaner
Product Category: Marine Cargo Tank Cleaning Chemicals
Chemical Type: Heavy-Duty Alkaline Degreaser
Application: Ship Cargo Tanks, Storage Tanks, Pipelines and Industrial Equipment

Applications

A very strong alkaline cleaner, which can be used to soften up / remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils, tung oil etc. It is free hydrocarbon solvents.Gentle & suitable for tank cleaning operation.

Vegetable and Animal Oils (Cleaning Procedure)


 1. Butterworth the tank with seawater or freshwater with a temperature 20°C. above the melting point of the product to be cleaned. After sufficient pre-cleaning of at least 1.5 hours the temperature can be increased. Drying and Semi-drying ProductsThese are oxidising products and through reaction with oxygen they will dry and harden. Tank cleaning should be executed as soon as possible after discharge. High temperatures (e.g. cleaning or steaming) and heated cargoes in adjacent tanks should be avoided.
 2. Butterworth the tank with cold to warm seawater or freshwater.If the product has a higher melting point Butterworth the tank with seawater or freshwater with a temperature maximum 10°C above the melting point of the product. After sufficient pre-cleaning of at least 1.5 - 2 hours the temperature can be increased. Fatty Acids or  vegetable/animal oils with high free fatty acid contentsee the cleaning suggestion of Fatty Acids.
 3. If seawater was used in step 1 it is of utmost importance to flush/rinse the tank with freshwater before cleaning as per step 3 is continued.   
 4. (Final cleaning)Prepare the following solution (A) in freshwater (see table):
 

  • Solution A(emulsification) 0. 4 % RXSOL-20-2046-210 Butterworth the tank with the prepared solution for 1, 5-2, 0 hours by recirculation. The necessary temperature can be achieved / maintained by means of heating coils, cargo heat exchanger or Butterworth heater. Depending on the amount of product residues the solution can be used for 1 to 4 tanks.On some vegetable/animal oils it is recommended to saponify additionally the product residues (see
    table): Therefore prepare one of the following solutions (B or C) in
    freshwater (see table):
     
  • Solution B 0.4 % RXSOL-20-2046-210 plus 2.5% Potassium Hydroxide (KOH) or Sodium Hydroxide (NaOH)
     
  • Solution C 0.4 % RXSOL-20-2046-210 plus 2 - 5% RXSOL AL 2005

 5. continuedButterworth the tank with the prepared solution for 1, 5-2, 0 hours by recirculation. The necessary temperature can be achieved /maintained by means of heating coil (service tank) cargo heat  exchanger or Butterworth heater.If RXSOL-20-2046-210 is used the  cleaning temperature should be 60-70°C If Sodium or Potassium Hydroxide is used the cleaning temperature should be 60.C.If RXSOL-20-2046-210 Marine is used the cleaning temperature can be 70-80°C. Depending on the amount of product residues the solution can be used for 1 to 3 tanks.
 6. Butterworth the tank 1 hour with hot seawater
 7. Rinse the tank with fresh water
 8. Inspect the tank; if white residues or a white film is present (calcium/magnesium soaps or carbonate) Butterworth the tank with one the following solution: 3-5% phosphoric acid and 0.4% RXSOL-20-2046-210 (stainless steel only); or 3-5% nitric acid and 0.4% RXSOL-20-2046-210 (stainless steel only); or 5-10% citric acid and 0,4% RXSOL-20-2046-210 (also suitable for Epoxy Coatings) or 2% RXSOL-16-1011-025 Marine and 0,4% RXSOL-20-2046-210 (also suitable for Epoxy Coatings) The cleaning temperature should be moderate (50°C.) Use heating coils not the Butterworth heater.
 9. Flush the tank with fresh water
10.Ventilate, mop and dry the cargo tank.


Note: for vegetable oils which can be cleaned only by the RXSOL-20-2046-210 (Solution A) the final cleaning can be carried out by recirculation or byinjection (see method 3).

Where it is used

DRYING OILS.   
CLEANING TIPS : PREWASH WITH 
COLD SEA WATER THEN MAIN WASH WITH HOT SEA WATER AND INJECT CAUSTIC POTASH LIQUID Based cleaner RXSOL-20-2046-210
CHINA WOOD OIL POPPYSEED OIL
CANDLE NUT OIL RUBBERSEED OIL 
HEMPSEED OIL SAFFLOWER OIL 
LINSEED OIL SOYA BEAN OIL 
MENHADEN OIL TALL OIL 
MUSTARDSEED OIL TUNG OIL 
OTTICEA OIL WALNUT OIL 
PERILLA OIL 

SEMI-DRYING OILS. 
Cleanig TIPS : PREWASH WITH COLD SEA WATER THEN MAIN WASH WITH HOT SEA WATER AND INJECT CAUSTIC POTASH LIQUID RXSOL-20-2046-210 
BABASSU OIL COD OIL 
CODLIVER OIL COTTONSEED OIL 
CROTON OIL HERRING OIL 
JAP FISH OIL MAIZE OIL 
SARDINE OIL SESAME OIL 
SHARK OIL SUNFLOWERSEED OIL 
WHALE OIL WHEAT OIL 

NON-DRYING OILS. 
CLEANING TIPS : PREWASH WITH HOT SEA WATER THEN MAIN WASH WITH SEA WATER AND INJECT CAUSTIC POTASH BASED LIQUID RXSOL-20-2046-210 
ALMOND OIL ARACHIS OIL (GROUNDNUT) 
CAMPHOR OIL CANADA OIL 
CARAPA OIL CHASHEW NUT OIL 
CASTOR OIL COCONUT OIL 
COHUNE OIL CURI CURI OIL 
GERANIUM OIL LARD OIL (ANIMAL) 
NEATSFOOT OIL OLIVE OIL 
PALM OIL PINE OIL HOT 
RAPESEED OIL (COLZA) RICE OIL 
SEAL OIL SPERM OIL 
TACUM OIL TALLOW OIL 
TEA SEED OIL

Dosage

Recommended Dosage & Cleaning

Cleaning Method

Initial Trial Concentration

Tank recirculation

2–5%

Heavy fatty residues

5–10%

Spray cleaning

5–10%

Spot cleaning

10–20%

These are trial ranges requiring confirmation against the actual cargo, tank coating and cleaning equipment. Comparable marine alkaline cleaners use warm cleaning solutions and concentrations in these ranges.

Cargo Tank Cleaning Procedure

  1. Remove free oil and recover remaining cargo residues.

  2. For drying and semi-drying oils, start with a cold-water prewash to avoid hardening residues.

  3. Gradually increase the cleaning temperature, typically to 50–65°C where permitted.

  4. Recirculate the diluted alkaline cleaner through the tank washing machines.

  5. Rinse thoroughly with water and inspect for oily films or soap deposits.

  6. Complete a fresh-water rinse, dry and verify cleanliness against the next cargo requirements.

The initial cold-water wash is particularly important for drying vegetable oils.

Also known as

NavaClean 803 Alkatuff PHS 210 Ltr

Notes

Key Features

  • Strong cleaning action against vegetable oil and animal fat residues.

  • Helps saponify fatty residues through alkaline hydrolysis.

  • Effective emulsification and dispersion of oily contamination.

  • Suitable for hot-water circulation and tank cleaning machines.

  • Low-foaming formulation options for CIP and recirculation systems.

  • Water-based and free from intentionally added hydrocarbon solvents.

  • Suitable for stainless steel and approved alkali-resistant tank coatings.

 

Vegetable oils can be cleaned  by the recirculation or by injection method. Pl. refer below point of  REMARKS

 

 

 

* Use a strainer at the pump stack when circulating any solution.*
  Tank Lining – Stainless / Epoxy / Phenolic

Remarks

Vegetable and Animal Oils (Cleaning Procedure)


 1. Butterworth the tank with seawater or freshwater with a temperature 20°C. above the melting point of the product to be cleaned. After sufficient pre-cleaning of at least 1.5 hours the temperature can be increased. Drying and Semi-drying ProductsThese are oxidising products and through reaction with oxygen they will dry and harden. Tank cleaning should be executed as soon as possible after discharge. High temperatures (e.g. cleaning or steaming) and heated cargoes in adjacent tanks should be avoided.
 2. Butterworth the tank with cold to warm seawater or freshwater.If the product has a higher melting point Butterworth the tank with seawater or freshwater with a temperature maximum 10°C above the melting point of the product. After sufficient pre-cleaning of at least 1.5 - 2 hours the temperature can be increased. Fatty Acids or  vegetable/animal oils with high free fatty acid contentsee the cleaning suggestion of Fatty Acids.
 3. If seawater was used in step 1 it is of utmost importance to flush/rinse the tank with freshwater before cleaning as per step 3 is continued.   
 4. (Final cleaning)Prepare the following solution (A) in freshwater (see table):
 

  • Solution A(emulsification) 0. 4 % RXSOL-20-2046-210 Butterworth the tank with the prepared solution for 1, 5-2, 0 hours by recirculation. The necessary temperature can be achieved / maintained by means of heating coils, cargo heat exchanger or Butterworth heater. Depending on the amount of product residues the solution can be used for 1 to 4 tanks.On some vegetable/animal oils it is recommended to saponify additionally the product residues (see
    table): Therefore prepare one of the following solutions (B or C) in
    freshwater (see table):
     
  • Solution B 0.4 % RXSOL-20-2046-210 plus 2.5% Potassium Hydroxide (KOH) or Sodium Hydroxide (NaOH)
     
  • Solution C 0.4 % RXSOL-20-2046-210 plus 2 - 5% RXSOL AL 2005

 5. continued Butterworth the tank with the prepared solution for 1, 5-2, 0 hours by recirculation. The necessary temperature can be achieved /maintained by means of heating coil (service tank) cargo heat  exchanger or Butterworth heater.If RXSOL-20-2046-210 is used the  cleaning temperature should be 60-70°C If Sodium or Potassium Hydroxide is used the cleaning temperature should be 60.C.If RXSOL-20-2046-210 Marine is used the cleaning temperature can be 70-80°C. Depending on the amount of product residues the solution can be used for 1 to 3 tanks.
 6. Butterworth the tank 1 hour with hot seawater
 7. Rinse the tank with fresh water
 8. Inspect the tank; if white residues or a white film is present (calcium/magnesium soaps or carbonate) Butterworth the tank with one the following solution: 3-5% phosphoric acid and 0.4% RXSOL-20-2046-210 (stainless steel only); or 3-5% nitric acid and 0.4% RXSOL-20-2046-210 (stainless steel only); or 5-10% citric acid and 0,4% RXSOL-20-2046-210 (also suitable for Epoxy Coatings) or 2% RXSOL-16-1011-025 Marine and 0,4% RXSOL-20-2046-210 (also suitable for Epoxy Coatings) The cleaning temperature should be moderate (50°C.) Use heating coils not the Butterworth heater.
 9. Flush the tank with fresh water
10.Ventilate, mop and dry the cargo tank.


Note: for vegetable oils which can be cleaned only by the RXSOL-20-2046-210 (Solution A) the final cleaning can be carried out by recirculation or byinjection (see method 3).

Where we supply

Oman. Stocked at our warehouse in Barka, South Al Batinah, and supplied to Muscat, Ruwi, Mutrah, Seeb, Rusayl, Barka, Sohar, Shinas, Saham, Buraimi, Nizwa, Ibri, Sur, Salalah, Duqm, Khasab and every other governorate.

Ports and free zones. Port Sultan Qaboos (Mutrah), Mina Al Fahal, Sohar Port and Freezone, Port of Salalah and Salalah Free Zone, Port of Duqm and the Duqm Special Economic Zone, Port of Sur, Khasab Port and Al Mazunah Free Zone.

Industrial areas. Rusayl, Sohar, Barka (Sanaya), Raysut (Salalah), Nizwa, Sur, Buraimi and Duqm industrial estates, Knowledge Oasis Muscat, and oil and gas sites across Oman.

Beyond Oman. We have branches in the UAE (including Fujairah), India (Kandla, Kolkata, Visakhapatnam, Chennai and Mumbai), Kenya (Nairobi) and Canada, and we also supply to South Africa.

Questions about AlkalineTuff Veg Oil Cleaner

Who is the largest AlkalineTuff Veg Oil Cleaner supplier in Oman?

Oman Chem is the largest AlkalineTuff Veg Oil Cleaner supplier in Oman. We manufacture our own RXSOL formulation and stock it at our Barka warehouse.

Can AlkalineTuff clean palm oil and animal fat from ship tanks?

Yes. It is formulated to remove vegetable oil and animal fat residues from marine cargo tanks and associated equipment.

How much AlkalineTuff should I trial for tank recirculation?

Start with a 2 to 5% solution in fresh water. The suitable concentration depends on the residue, coating and washing equipment.

Why does drying oil need a cold-water prewash?

Drying and semi-drying oils react with oxygen and can harden on tank surfaces. A prompt cold-water prewash helps reduce hardened deposits.

What causes a white film after vegetable oil tank cleaning?

It may be a deposit of calcium or magnesium soap or carbonate. Identify the film before selecting a treatment compatible with the tank surface.

What is the price of AlkalineTuff Veg Oil Cleaner in Oman?

We quote each order according to pack, quantity and delivery point. Send your requirement on WhatsApp or through the quote form for today's price.