Your shopping cart is empty.
RXSOL Carbon, Was Founded in 1996 & Located in KOLKATA Industrial Area, Mumbai Delhi Road, Howrah, West Bengal. Our company is Professionally Engaged in Operation of ACTIVATED CARBON, Activated Alumina, Silica Gel, and many other chemicals.
Activated Carbon Pellet can be used in solvent recovery from air streams such as the vapor of Benzene, ketone, ester, petroleum. The fasting adsorption and desorption, high capacity for treatment solvents air stream that the recovery capacity can reach 97%.
The odors in the indoor air include Ammonia, Amine, and trimethylamine, sulfur methanol, hydrogen sulfide, etc., Using Pellet as adsorption material removes and deodorize more efficient, and also remove particles and moistures existing in the air, particularly Aromatics which may cause cancers.
Activated carbon is useful in drinking water treatment because it acts as an adsorbent , and can effectively remove particles and organics from water. These organics are of great concern in water treatment because they react with many disinfectants, especially chlorine.
The use of Activated Carbon in wastewater treatment systems is a proven process for removal of organic compounds. As a tertiary treatment method, carbon adsorption and regeneration have been used to process domestic wastewaters contaminated with industrial wastes of organic origin as well as biologically treated waste waters. Activated Carbon, when contacted with water containing organic material, will remove these compounds selectively by a combination of adsorption of the less polar molecules, filtration of the larger particles, and partial deposition of colloidal material on the exterior surface. The quantity of Activated Carbon required will depend upon the degree of contamination.
An amorphous from of carbon characterized by high adsorptivity for many gases, vapors, and collodial solids.
Used for water and air purification, solvent recovery, waste treatment, removal of sulfur oxide from stack gases and "clean'' rooms as deodorant, and for air conditioning.
Widely used for purification of exhaust gas, chemical raw material gas, chemical synthesis gas, gas for the pharmaceutical industry, carbon dioxide gas for beverages, purification of hydrogen gas, nitrogen gas, hydrogen chloride, ethane gas, purification and separation of atomic facility exhaust, etc. There is also impregnated activated carbon, such as KOH activated carbon, NaOH activated carbon, sulfur impregnated granular activated, Desulfurization and denitrification activated carbon, acid wash activated carbon for removing special harmful gases.
DETERMINATION OF M.B. VALUE OF ACTIVATED CARBON REAGENT:
Methylene Blue Solution – Dissolve 0.15 gram of methylene blue confirming to IS: 2230-1962 in 100 ml of Distilled Water (Distilled water having pH value 7.0). PROCEDURE : Weigh accurately about 0.1 gram of the material, as received, with accuracy of 0.01 gram and transfer to 50 ML Glass stoppered flask. Add from a burette 10 ml of methylene blue solution and shake for 5 minutes. After the first 10 ml are decolorized continue to add methylene blue solution (1 ml at a time) till the blue colour disappears for 5 minutes. Decolorizing power of Activated Carbon is expressed in terms of milligrams of methylene blue adsorbed by 1 gram of activated carbon. (This value is MB value).
CALCULATION :
DECOLOURIZING POWER = 15 x V Divided by 10 x M
Where V = volume in ml of methylene blue solution consumed, and M = mass in gram of the material taken for the test. (Use methylene blue of any standard company to prepare solution and compare solution with standard solution of methylene blue as it does vary batch to batch).