Primary tabs



Product Code ::RXSOL-22-2210-210
Categories: Hold Solution-22
Product Description:

Polymer based Hold coating product, Easy to apply on SHIP HOLD SURFACE.  Slip Barrier Coats HOLD BLOCK is POLYMER BASED non-reactive coating materials which makes thin film barrier on the surface after dry. Due to the formation of RXSOL THIN barrier film on the surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Product Short Description: Polymer BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.
Product Application:

RXSOL HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels, which carry corrosive and/or messy cargos such as sulfur salt petcock coal, and concentrates. It can be easily removed with itRecommendation Dose for smooth surface : 

for Sulphur, Salt, etc        100 Ltrs/Hold for HANDYMAX & 150 Ltrs/Hold for PANAMAX
& for Petcoke, Coal, etc   200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX

This material can be used directly with low-pressure machine or manually by a garden spray pump. in general practice on smooth & clean surface each drum of 210 ltrs cover 2000 to 2500 sq meters while on rough and rusted surfaces require more quantities of materials.

Product Dose:

for HANDYMAX  (5 Holds) : In general  500 Ltr to 1000 Ltr   RXSOL-22-2210-210 require to cover area up to 12 mtrs , i.e approx 1/2 drum to 1 drum of material is sufficient for each hold , while
for PANAMAX    (7 Holds) : In general 1000 Ltr to 2000 Ltrs RXSOL-22-2210-210 require to cover full area. , i.e approx 3/4 drum to 1.25 drums of material is sufficient for each hold.

Refer this link for complete set of HOLD CLEANING KIT  ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

Product Note:

This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.

Precaution : 1 > Deposition of previous cargo /  Lime wash should be removed .
                    2 > Newly Painted surface should be fully cured.

 

Other Valuable Hold Cleaners :::

Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020,  Part No.- RXSOL-22-2202-050

Part No.- RXSOL-22-2202-035, Part No.- RXSOL-22-2202-210
 
 
Slip Barrier Coat RXSOL HOLD BLOCK  ::: Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results. Part No.- RXSOL-22-2210-210, Part No.- RXSOL-22-2210-025, Part No.- RXSOL-22-2210-050
 
BARRIER HOLD COAT ::: Highly effective ecofriendly Product blending of natural ingredients which is provide thin temprory film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulphur, Salt, Petcoak, Cement etc and Hold surface. Part No.- RXSOL-22-2211-210
 
COAL REMOVER rx hold  ::: A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2215-210, Part No.- RXSOL-22-2201-025, Part No.- RXSOL-22-2201-050
 
 
Hold Wash Concentrate RX ::: RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination. Part No.- RXSOL-22-2204-210, Part No.- RXSOL-22-2204-025, Part No.- RXSOL-22-2204-050
 
 
Rock Phosphate Cleaner rx hold  ::: A powerful penetrating mixed chemical products to remove heavy Rock Phospate deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2201-210
 
PCS Hold Clean ::: RXSOL PCS is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition accumulations from cargo and storage tanks, Also Developed for cargo hold cleaning to remove stains.  Part No.- RXSOL-22-2208-210
 
HBI CARGO Hold Wash Concentrate RX::: RX HBI CARGO Hold Wash Concentrate RX is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for HBI CARGO . it can be used as a powerful\ stand alone cleaner for HBI CARGO dust and deposition. Part No.- RXSOL-22-2216-210, Part No.- RXSOL-22-2216-025
 

 

Product Technical Specification:
Industrial area:
Before loading of cargo Slip Barrier Coat paint/film can be wise decision to save time for next cargo. As Slip Barrier Coat hold block acts as the barrier film in between cargo and holds surface, So deposition of cargo directly on hold is not possible, and it can be removed easily without scrapping. And Slip Barrier Coat also provide protection against corrosiveness of cargo bye product.
 
Application of Slip Barrier Coat is just like a lubricant, As it is water soluble polymerized products. This product can be simply spray on the entire surface by manually or through spray machine. And after application of Slip Barrier Coat Its removal is also very easy process. Only by using hold wash with water can remove all coating of Slip Barrier Coats HOLD BLOCK.
 
As before application of Slip Barrier Coat, Proper uses of hold cleaning chemicals like RXTUFF ALKALINE or ALKAATUFF can save required qty of Slip Barrier Polymer Coats HOLD BLOCK as hold block coating.

Slip Barrier Polymer Coat and Slip Barrier Polymer Coat plus MSDS available with each and every drum. And MSDS also can be download through our website directly by using USER NAME and password. 

Ready stock of Slip Barrier Polymer Coat available with us at Gandhidham - Kandla, Mundra, Kolkata - Haldia, Visakhapatnam - Gangavaram, Chennai - Ennore, Mumbai - Nhava Seva, Surat in India and  Fuajirah - Dubai, Sharjah in GULF - Middle East.

Also we are keeping ready stock of Muriatic Acid, ALKATUFF High Foam ship hold cleaning chemicals, PCS, Coal Remover, Lime Remover,  Alka cleaner etc... Full range of marine chemicals.

#HOLDBLOCK_Mumbai_KANDLA_Mundra_Vizag_Supplier
Related Products: Aqua Clean Tuff High Foam
Remarks:

Refer this link for complete set of HOLD CLEANING KIT  ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

SLIPcoat supplier in Sohar Muscat Oman, Fujairah Dubai UAE

Other Equivalent Brand:

Slip Barrier Coat Hold Block Resist, RBM HOLD BLOCK, GREEN BARRIER, HOLD SURFACE PROTECTOR, PRELOAD 300, Stromme Paint Protector, Er Easy Cote

Product Tag Identification:

Ship hold protective layer coating chemicals. Polymer emulsion based  Slip Barrier Polymer Coats HOLD BLOCK is easy to use. There is no any special technical method required to applied on hold surface. Simply dilute the Slip Barrier Polymer Coat with water and spread on entire hold area from top to bottom side. Extra liquid coming towards bottom can be recollected to cover uncoated area. Simple spray method is helpfull to save time of application.  NOTE - Before application of Slip Barrier Polymer Coat Hold Block clean entire hold surface area and make sure dust free.

#ShipHoldBlock
#ShipSlipCOAT
#MarineChemicals
#ShipHoldCleaningChemicals

Product Useful Area:

Slip Barrier Polymer Coats HOLD BLOCK formulated to perform maximum protection to wards hold surface during transport and save lot of time during unloading operations as cargo doesn't adhere towards hold surface. After unloading of cargo when RXSOL ALKALINE DETRERGENT is applied to Slip Barrier Polymer Coat treated hold surface all cargo residue get off without any extra manual force requirement.

#SLIPcoat_supplier
#HOLDblock_manufacturer

Keyword:

Hold Block, Slip Barrier Coats HOLD BLOCK, Preload 

Refer link for HOLD CLEANING APPLICATOR KIT : http://rxmarine.com/Ship-Cargo-Hold-Cleaning-and-applicator-Kit-supplier-India-Middleeast-Dubai

packaing_size:

Slip Barrier Polymer Coats HOLD BLOCK RXSOL HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels which carrying corrosive and / or messy cargos such as Sulphur, Salt, Petcoke, coal and concentrates. It can be easily removed after discharging of cargo .
FEATURES AND BENEFITS:...................................
$ Protects metal against corrosive cargo.
$Safe on all coatings, and to the personnel handling it.
$ Protects paint against cargo penetration.
$ Environmentally friendly .
$ Safe to use in occupied / covered areas.
$ Reduces turn around times .
$ Easy to Direct Spray.

Other Important materials , which help to control corrosion on metal surface. Chemically SULPHUR producing STRONG acid in presence of  moisture under excess of temperature, Freshly prepared acid during the reaction rapidly damaging steel surface. This can be prevented by ACID neutralisation method. RXSOL BILGE COAT is specially meant to solve this issue. For more details of product, You may click here to know more details about product and usingprocedure.

RXSOL Bilge Coat (Sulphur Acid Neutralizer)  Acts as Acid Neutralizer formed during sulphur voyages. 

Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates