Primary tabs



Product Code ::RXSOL-40-4058-210
Categories: Sewage Chemicals Treatment-40
Product Short Description: Reverse Emulsion Breaker 2366 is a formulation of cationic polyelectrolytes and inorganic salts used in theclarification of oil field and industrial waste waters.
Product Description:

Reverse Emulsion Breaker 2366 RX is a formulation of cationic polyelectrolytes and inorganic salts used in theclarification of oil field and industrial waste waters.  The product may be used in conjunction with mechanical clarification methods such as gas flotation units and hydrocyclones.

Product Application:

Industrial waste water treatment.

Product Dose:

Direction For Use :

  • Reverse Emulsion Breaker 2366 (Polyfloc)c should be injected at a point in the system where agitation (natural or mechanically induced) is sufficient to mix with the fluid to be treated.
     
  • Location of the injection point for maximum efficiency will have to be determined empirically, but normally longer mixing times give the best clarification results.
     
  • If Reverse Emulsion Breaker 2366 (Polyfloc) is used in secondary treatment of oilfield waters, it should be injected upstream of the
    treating vessel in the pump suction or in the first cell.
     
  • Use concentrations can vary from 1 to 100 ppm. Initial use concentration can best be determined by jar tests, while the final use concentration will be determined in the system.
     
  • When Polyfloc is used in combination with other water clarification chemicals, injection points it should be separated enough to allow complete mixing of one before the other is introduced. Jar tests will be required to determine which order of addition is most efficient.
     
  • Clarification may in some systems may be more effective if the pH of the system is adjusted to less than 7.0.
Product Note:

Product Future :

  • Increases the settling rate of suspended solids.
  • Aids hydrocarbon recovery from water stream.
  • Aids in the coagulation of suspended particles prior to treatment in flotation cells or selling vessels.
  • May be used without the aid of other water clarification chemicals or in conjunction with other
  • chemicals for hard to treat water systems.
  • Cleans up environmentally unacceptable oily water.

Compliances: None
Precautions: Please refer to appropriate safety data sheet (SDS) prior to using this product.  FOR INDUSTRIAL USE ONLY

Industrial area:
Remarks:
Other Equivalent Brand:

TruBreak 737, Applied Polyfloc A2366

Product Tag Identification:

#ReverseDemulsifier_ManufacturerSupplier
#ReverseDemulsifier_IndiaUAEoman

Product Useful Area:

Keyword:

packaing_size:

Reverse Emulsion Breaker 2366 manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Reverse Emulsion Breaker 2366 at a competitive price from us. We have ready stock of Reverse Emulsion Breaker 2366 in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates