Your shopping cart is empty.
RXSOL-13-1501-025 is a superior & powerful neutral cleaner containing corrosion inhibitors to prevents the corrosion of metals.It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities.It is free from Hydrocarbon solvents,Biodegradable and minimizes the extreme hazards to personnel in handling materials Applications RXSOL-13-1501-025 Suitable for cleaning engine components like fuel and Lube oil filters,Injection nozzles, pump components, inlet and exhaust valves & primarily refers to cleaning of hard surfaces,such as Decks,Tanks,Engine-rooms,etc.can be used for all types of cleaning and degreasing and may be applied by brush,handspray,high and low pressure washing machines etc.Directions for Use and Dose Rates General Cleaning.
Why .... RXSOL Liquid Soap is better .... than .... any others ?
( 1 ) - RXSOL Liquid Soap is manufactured under Quality-Control-System.
( 2 ) - There are generally used SALT ( Sodium Chloride ) in Local Market , which is dangerous for cleaning due to high Chloride value . In General market availability of local products' Chloride value is crossing sometimes 200 PPM whereas scientifically, maximum Chloride limit is 5 PPM.
( 3 ) - RXSOL Liquid Soap is blended of selected Long-chain-polar surfactant.
( 4 ) - RXSOL Liquid Soap has low Foam due to advance technique whenever others have high Foam resulting to waste our precious water and more time .
( 5 ) - Any liquid has bacterial & fungal growth nature due to lack of Preservative . Generally no one use Preservative to avoid such growth. You may ask your other supplier , " which Preservative do you use to stop the growth of Bacteria, Algae, etc. ? "
The growth of bacteria makes your liquid solution highly poisonous which may cause many disease to us. Our RXSOL - Liquid Soap is blend of Preservative to stop such growth.
liquid detergent for washing tableware and kitchen utensils.Formulated to cut greasy stains in a wide range of conditions including hard water.Soft and mild on the hands.
RXSOL-13-1501-025 can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low pressure washing machines etc.Time necessary for cleaning depends on the nature and thickness of the deposits.20-30 min.will suffice for most applications.Hardened,carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage.If allowed to cool,the degassing procedure must be repeated.
Neutral Liquid Cleaners are applicable in various sectors as a Multipurpose cleaner.It is an anionic surfactant as well a liquid based detergent.
These chemicals are very effective in nature & had some major benefits:-
It is completely soluble in water, chlorinated solvents and most aromatic solvents.
It is chemically stable in presence of dilute acids, bases and salts.
It is also compatible with soaps, anionic, cationic and other non-ionic surfactants and many organic solvents.
It has excellent rinsability nature and does not leave behind any residue after cleaning.
It is neutral pH and non-oxidising,which makes it human skin friendly.
Some of the major application areas of multipurpose neutral liquid cleaner are:-
Pharma and Bulk Drug Industry for cleaning of vessels, utensils, tables, floors and walls.
Food, Beverage and Dairy Industry for multipurpose cleaning cum degreasing of stubborn greasy fat and protein deposits and stains of milk and milk products on aluminum / plastic crates, floors, walls, tables and other food contact surfaces.
Shipping Companies for cleaning of vessels, tanks, floor and walls of containers.
The Importance of RXSOL-13-1501-025 by High-Pressure Cleaning The job of high pressure cleaning can be done easier & quicker by simply using RXSOL-13-1501-025 in correct dosa -ges. Using a high pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:
Step 1 : Spraying the RXSOL-13-1501-025 over the area to be cleaned.
Step 2 : Washing down the area using a high-pressure water jet After the RXSOL-13-1501-025 has been sprayed on the surface and before
The wash down begins, the chemicals penetrates & thoroughly moistens dirt & other grime. During wash down, the RXSOL-13-1501-025 thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results. In addition to being more effective, the use of RXSOL-13-1501-025 substantially reduces the time required for the Cle -aning operation, as well as preventing dirt from reforming on the surface. The use of RXSOL-13-1501-025 in correct dosages is half the job done. 3 Pieces of Good Advice Apply RXSOL-13-1501-025 on dry surface where possible!A dry surface will absorb far better than a wet surface.When applying RXSOL-13-1501-025 on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, theRXSOL-13-1501-025 may produce "channels" down the surface, thereby running too fast off the surface. During high pressure cleaning:It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of RXSOL-13-1501-025 will give the best effect.
RXSOL-13-1501-025 should be mixed with warm water at a rate of 50-200 ml per 10 litres.i.e.1cup of RXSOL-13-1501-025 to a bucket of water. RXSOL-13-1501-025 solution can be applied simply by mops, brushes or rags,or by dipping the soiled articles into the RXSOL-13-1501-025 solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, RXSOL-16-1501-020 is not recommended for washing machines. Tank Cleaning Cargo tank cleaning to remove residues of Mineral, Animal, Vegetable or Fish oil, Waxes & Soot from inert gas systems.
Method of Application and Dose Rates:
Note: Whenever possible,the cleaning solution should be heated to 60-80°C.If this method is not possible,other conventional methods such as separate rate direct injection,recirulation or hand spraying provide acceptable options.For boiler fire side cleaning,a 10-20 % hot solution, (temp.above 40°C),should be sprayed on to the surfaces to be cleaned.Allow to penetrate for 20 minutes and flush off. For deposits which are very hard to remove, increase the concentration to 50% and repeat if necessary
Characteristics:
• Removes grease, oil, carbon deposits, soil and grime.
• Keeps loosened deposits in suspension preventing re-deposition.
• Low toxic.
• Biodegradable.
• Non-flammable.
• Free from hydrocarbon solvents.
• Effective and economical in use
• Water-based cleaner.
• RXSOL-16-1501-025 has numerous cleaning applications including removal of greases, waxes,
oil, sludge, soot, carbon deposits and general dirt and grime.
• Non-corrosive to ferrous metals.
• Suitable for all tank-coatings.
• Can be used for gas and hydrocarbon freeing of tanks.
• Can be used for deodorizing
• Contains wetting agents.
• Leaves surfaces residue free. Page 2 of 3 : 3 :
• Acceptable for use in food areas.
• Suitable for accommodation cleaning of woodwork, leather, desks, etc.
• Suitable for cleaning of toilets and showers.
• Suitable for cleaning of reefer boxes.
• Can be used for cleaning of windows and portholes.
• Can be used for cleaning of dishes.
• Can be used for cleaning of hospitals.
• Can be used for hand laundry cleaning.
Liquid Detergent Heavy DUTY Neutral manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Liquid Detergent Heavy DUTY Neutral at a competitive price from us. We have ready stock of Liquid Detergent Heavy DUTY Neutral in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.