Your shopping cart is empty.
RXSOL Coal Remover:
RXSOL Coal Remover is a specialized cleaning chemical designed to help remove coal deposits, coal dust, carbonaceous residues and stubborn mineral-organic contamination from suitable marine and industrial surfaces.
Coal cargo operations can leave behind persistent residues on cargo holds, decks, hatch covers, machinery, equipment and surrounding surfaces. RXSOL Coal Remover provides a practical chemical cleaning solution for maintenance and post-cargo cleaning operations.
A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.
It is free from hydrocarbon solvents, non flammable and biodegradable.
Biodegradable / Non-Toxic / Non-Pollutant.
VERY Cost effective.
Recommended to use spray equipment.
The use of hot water will greatly enhance the effectiveness of the cleaning and should be utilized whenever possible.
High quality Ship Hold Clening product, Enhanced with good foaming properties specifically formulated to remove different type of coal cargo residues from the cargo.
• Use cold - No heating required.
• Easily dissolves deposits containing COAL DUSE , IRON DUST etc.
• Economical to use.
• Scraping not required.
• Non- flammable.
Alkaline Product also Helpful to neutralize Free Acid and Rust.
Key Benefits
Helps remove stubborn coal residues
Effective against coal dust and carbonaceous deposits
Suitable for marine and industrial cleaning
Helps loosen strongly adhered contamination
Useful for post-cargo hold cleaning
Supports routine shipboard maintenance
Suitable for selected metal and hard surfaces
Can be used as part of a planned cargo-residue cleaning program
Directions for Use and Dose Rates
Soak Method:-
It may be used concentrated or diluted with water, depending on the degree of contamination, the surface area to be treated, the desired degree of cleaning and the available downtime.Actually, the user is the best one capable to regulate the quantity and concentration to be used for the situation at hand.In any case, when the accumulation is not heavy, a 50% solution with water must be used. Otherwise,RXSOL-22-2201. can be used undiluted especially when deposition is heavy and hard spots persist.
Cleaning Procedure
Conventional cleaning methods such as a brush,hard sponge, thick and hard broom and /or a mop can be used on heavy duty and hard stain deposits.Note that for heavy accumulations the cleaning procedure might be necessary to be repeated until the results are satisfactory. Furthermore, is important to keep in mind that 1 litre of RXSOL-22-2201 is sufficient to cover a surface area of 8–10 square meters.
NOTE ::: -- Let this product soak into the surface for 30-45 minutes. Then using a high-powered spray washer blast the surfaces until the stains and discoloration is gone.
Note:-
• Cleaning time will vary depending on the extract nature and thickness of deposit to be removal.
• Stubborn deposits should be scrubbed to assist the cleaning operation.
Your local Rx CLEANSERS representative will work with you to design the optimum concentration & procedure for your system.
RXSOL-22-2201 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-22-2201 it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of Alkalinity Control in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.
RXSOL Coal Remover can be considered for cleaning:
Coal cargo holds
Hatch covers
Cargo decks
Shipboard equipment
Machinery exteriors
Steel structures
Access areas contaminated with coal dust
Marine workshops and maintenance areas
Coal residues can become firmly attached to hold surfaces, especially after repeated cargo operations. Chemical treatment can help loosen deposits before high-pressure water washing and mechanical cleaning.
A typical cleaning program may involve:
Remove loose coal and bulk residues.
Apply the appropriately diluted cleaning solution.
Allow suitable contact time.
Agitate heavily contaminated areas where necessary.
High-pressure rinse thoroughly with fresh water.
Inspect the surface and repeat treatment if required.
Complete final rinsing and drainage according to the vessel's cleaning procedure.
Exact dilution, contact time and application method should always follow the current RXSOL TDS/SDS and the specific cargo residue condition.
RXSOL Coal Remover may also be suitable for selected industrial cleaning requirements involving:
Coal handling equipment
Conveyor areas
Industrial floors
Coal storage areas
Machinery exteriors
Steel structures
Material-handling equipment
Coal dust contamination
Coal Remover is intended for cleaning coal cargo residues and coal-related deposits.
Coal Tar Remover is a different type of chemical used for heavy tarry materials such as coal tar, bitumen and asphalt-related residues.
Selecting the correct product according to the actual contamination is important for effective cleaning.
RXSOL marine and industrial cleaning chemicals are supplied for vessel and industrial maintenance requirements through major marine and industrial locations in India, UAE and Oman, subject to product availability and delivery requirements.
For vessel supply, customers can provide:
Vessel Name | Port | Product | Quantity | Required Delivery Date
This helps determine the appropriate supply arrangement.
COAL REMOVER manufacturer and supplier in India / Turkey / Middle East. We havs stock point in Mumbai, JNPT, Surat, Hazira, Mundra, Kandla, sikka, Goa, Manglore, Visakhapatnam, Kamraj Port, Ennore, Chennai, Kolkata, Buz Buz, Paradip, Fujairah, Istanbul, Dubai, Sharjah, Abu Dhabi, Gulf, Ruwi Barka, Muscat Oman,
We are classified as COAL REMOVER exporter of RXSOL brand.
you may click below to get all location details :::
For Tamilnadu - http://ennoreindiachemicals.com/contact-us
For Andhra Pradesh - http://vizagchemical.com/contact-us
For East Coastal - http://eastindiachemicals.com/contact-us
For Gujrat Port - http://westindiachemical.com/contact-us
For Mumbai Port - http://marinechemical.in/contact-us
For JNPT - GOA - Manglore port - http://rxchemicals.com/contact-us
For Middle East - Gulf - http://www.dubichem.com/contact
High quality product classified as a general cleaner/ remover of coal residues from cargo. COAL REMOVER helps to loosen coal deposit. Also help to remove stains and discolouring after discharge of coal cargoes.
Safety And Handling :-
Use appropriate PPE during handling and application. Avoid unnecessary contact with skin and eyes. Do not mix with other cleaning chemicals unless compatibility has been confirmed. Follow the latest RXSOL SDS, TDS and product-label instructions for dilution, storage, handling and disposal.
“RXSOL-22-2201” is completely safe to handle, being non-toxic & non corrosive.As with all chemicals general safety and handling procedures apply. Avoid contact with eyes as irritation may occur. Do not take internally. In case of contact with eyes, flush eyes immediately and cupiously with clean running water for 15- minutes and seek medical attention.
Rock Phospate Cleaner, PETCOKE looser, COAL REMOVER RX Hold 220 Ltr
This product is most popular for Ship Hold cleaning detergent for coal cleaning. Shipchandler Shipping Agent can get good discounts directly from our factory by providing there registered accounts number.
#CoaLremover_Mumbai
#CoaLremover_MundraKANDLA
#CoaLremover_Visakhaptnam
#CoaLremover_FujairahMuscat
#Coalremover_Haldia
#Coalremover_SupplierParadip
#ShipHoldCleaner
#AlkalineCleaner
#MarineChemical_ManufacturerSupplier
High quality product classified as a general cleaner/ remover of coal residues from cargo. COAL REMOVER helps to loosen coal deposit. Also help to remove stains and discolouring after discharge of coal cargoes.
Muscat, Salalah, Sohar, Duqm, Rustaq, Barka, Sanaiya, Sur, Seeb, Shinas, Nizwa, Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...
