Primary tabs



Product Code ::RXSOL-27-4020-025
Categories: Coolant Glycol Antifreeze-27
Product Short Description: Universal Antifreeze coolant 50% for cooling water systems , It is a Very effective blend of GLYCOL classified chemicals along with CORROSION inhibitor to protects all engineering precious metal including aluminium . Its chemically treated layer protect radiators and
Product Description:

RXSOL ANTIFREEZE GREEN Corrosion Inhibitor

Introduction

Antifreeze compound for cooling water systems , It is a Very effective blend of GLYCOL classified chemicals along with CORROSION inhibitor to protects all engineering precious metal including aluminium . Its chemically treated layer protect radiators and engines, against rust and corrosion. Its proper dose in cooling system gives full protection from corrosion.

It is biodegradable and does not present an environmental problem.


 


 

Product Application:

Solution Strength :
25 Ltrs RXSOL-16-4020-020 : 75 Ltrs Water gives freezing protection up to -140C  "or" 25% solution (1 part anti-freeze to 3 parts water)
For extra cold / winter climate , increase to a 33% solution (1 part anti-freeze to 2 parts water) to give freezing protection down to -170C.

 


 

Product Dose:

EYES : Irrigate copiously with clean, fresh water for at least 15  minutes. Seek medical advice.
SKIN :  Wash  immediately  with  plenty  of  water.  Remove  contaminated   clothing.  If  irritation  persists  seek  medical attention.  Wash  contaminated  clothing  before  using  them.
INHALATION : Remove to fresh air. If breathing is irregular seek medical advice.
INGESTION :  Obtain  immediate  medical  attention.  Induce  vomiting  only  if indicated  by  the  doctor.  Never  give anything  by  mouth  to  an  unconscious  person.

 

Product Note:

Coolant Green  is an inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and alloys that are used in cooling systems.It is especially appropiate for the use in heavy-duty engines such as those used in trucks,  ships and lokomotives.


• High performance corrosion inhibitor
• Being a nitrite free product it is compatible also with zinc - coated piping
• Easy control test with refractometer.

Product Technical Specification:
Industrial area:
Remarks:

Antifreeze

APPLICATIONS

Antifreeze Special is free from amine, phosphate and nitrite etc. And uses as  engine Antifreeze as well as coolant. This product is based on ethylene glycol. It contains a corrosion inhibitor,  salts of organic acids and silicates (Si-OAT). It protects all metallic parts against corrosion and deposits in the cooling system.

Benefit

The product protects all parts of cooling system from frost, oxidation and overheating.

It has long-term protection against corrosion for all materials used in the engine and radiator construction, such as cast iron, aluminium, copper and solder alloys as well as a good compatibility with hoses, seals or plastics.

It contains carefully selected amine, nitrite, boron and phosphate free inhibitors and is therefore environmentally friendly.

Other Equivalent Brand:
Product Tag Identification:
Antifreeze Coolant or Radiator Coolant is used by all vehicles for heat transfer. Antifreeze Coolant should be efficient in transferring the heat as well as preventing scale & corrosion of the radiator and the engine cooling system. Antifreeze Coolant is antifreeze during the winter due to low freezing point and an anti boiling during the summer season due to high boiling point.
 
Antifreeze Coolant or Radiator Coolant helps the engine to give optimum performance. All Antifreeze Coolant is based on Ethylene Glycol. RXSOL is selling Antifreeze Coolant.  RXSOL meets the international JIS - K - 2234 or OEM specification & Supersedes.
Product Useful Area:
MAXIMUM PROTECTION UNDER WIDE OPERATING TEMPERATURE RANGE
 
Fully formulated ethylene glycol base Coolant that has improved heat transfer ability.
Organic Acid Technology providing superior corrosion and rust protection leading to reduced maintenance.
Meets industry leading specifications – JIS K 2234 Class 2, ASTM D3306, BS 6580:2010.

The coolant should be prepared with water that is clean but not too hard. The following types of water are unsuitable: sea water,mixture of sea water and fresh water, salt water and industrial waste water. The analytical values of the water should be within the following limits :
Water hardness   : 0 -    100 ppm
Chloride contents: max 100 ppm
Sulphate contents: max 100 ppm
The water must be treated by suitable means if it does not fulfill these requirements, i.e. by adding softened, or distilled or deionized water. Excessive sulphate or chloride contents can also be reduced by adding distilled or deionized water.

Keyword:

At concentration of 10% by volume, Coolant Green Antifreeze affords excellent protection against cavitation and corrosion to all metal and alloys which are used in cooling system, such as aluminium, ferrous and yellow metals.

packaing_size:

Antifreeze Coolant Liquid Manufacturer, Exporter and supplier in Mumbai, Chennai, Kolkata, Visakhapatnam, Gandhidham, Fujairah, Abudhabi, Dubai, Sharjah, UAE Middle East Gulf, Muscat Barka Sohar Oman, Kenya Nairobi Uganda Africa, Canada, Sudan, Yemen

Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates