Product Short Description: Safe Acid Mineral Cleaner Very effective products to remove MINERAL SCALE deposits from SURFACES Product Description: Very effective products to remove MINERAL SCALE deposits from SURFACES. Safer to handle and store also Classified as a mild skin irritant. This is highly concentrated PHOSPHATE FREE , non fuming , non hazardous and biodegradable ingredient.

Product Short Description: Used as a tank cleaner or for general degreasing, cleaning and gs freeing for double bottom tanks, wing tanks, pipe lines, fuel oil tanks, etc. Product Description:

Product Short Description: Specially formulated, silica-based product for reducing corrosion normally associated with marine and offshore potable/fresh water storage systems. Use this product into the storage tank will form a protective barrier-type film on internal metal surfaces. Product Description: RXSOL-20-3113-025 is a specially formulated, silica-based product for reducing corrosion normally associated with marine and offshore potable/fresh water storage systems. Use this product into the storage tank will form a protective barrier-type film on internal metal surfaces. In addition, RXSOL-20-3113-025 will not impart any color, odor or taste to water being treated.

Product Short Description: Antiscalant water additives, used as pretreatment for Reverse Osmosis systems, are highly effective in preventing membrane scaling. Product Description: This is a reverse osmosis membrane treatment chemicals . It is highly concentrated polymer chemicals. RXSOL Antiscalant water additives, used as pretreatment for Reverse Osmosis systems, are highly effective in preventing membrane scaling. Applied Membranes carries a large inventory of RXSOL Antiscalant at competitive prices with technical support. Our design engineers can help you determine the proper dosing for our application. Most products in stock for immediate shipment.

Product Short Description: Citric Acid Liq solution for industrial descaling and derusting cleaning application. Product Description: Citric Acid concentrate in liquid form is available in various packing. RXSOL brand CITRIC ACID liquid is blend of various organinc and inorganinc acid in calculated proportion to perform better cleaning action. Due to its equilibrium formulation, Its descaling and derusting properties increases.

Product Short Description: This is powerfull concentrated and newly developed silica scale cleaner to clean hard silica water scale. Formation of Silica Scale stop heat transmission from heat exchanger, condenser tubes and boiler tubes. New Generation formula of Silica Scale Removal makes silica and silicate deposit removal Product Description: Silica Scale Remover is one of popular descaling solutions for silica or silicates scales removal from heat exchangers, condensers and boiler tubes. Presence of Silica in water time to time on heating and cooling forms hard deposit of silica compound, which is creating heat transmission problem. And silica deposit is very difficult to dissolve from heat exchanger, condenser tubes and boiler tubes. New Generation formula of Silica Scale Removal RXSOL-11-1102-025 makes silica and silicate deposit removal very easy.

Product Short Description: High quality product classified as a vegetable oil, animal oil, fat, fuel oil, lube oil and pet coke residues general remover/cleaner applied to cargo and storage tanks as well as to other systems. Furthermore, it removes carbonaceous deposits. Product Description: Tank Cleaner Alkaline Swift High quality product and powerful cleaner. This is specialised tank cleaner which is blend with alkaline materials along with surfactants Tank Cleaner Alkaline Swift is free of hydrocarbon solvents and is biodegradable and effectively achieve numerous ship tank cleaning operations. Tank Clean Alkaline Swift is classified as a vegetable oil, animal oil, fat, fuel oil, lube oil and pet coke residues general remover/cleaner applied to cargo and storage tanks as well as to other systems. Furthermore, it removes carbonaceous deposits .This powerful concentrated formula provides immediate and efficient results while it acts as an odor eliminator.

Product Short Description: Very power full superior product which making the film to protect the Corrosion and antiscalant in Pipe line and equipment where supplies hot and cold water. Product Description: Antiscalant C.I ALKA is very power full superior product which making the film to protect the Corrosion and antiscalant in Pipe line and equipment where supplies hot and cold water. RO antiscant Scaling is caused in membranes because the level of hardness salts in the water becomes highly concentrated as it passes through the RO unit. In smaller units scale formation can be prevented by base exchange softening the make-up water but for larger systems that is very expensive. We have developed a range of easy to handle, cost effective RO Antiscalant which increase the solubility of the hardness salts so they remain in solution rather than forming scale on the membrane. Our cost effective RO antiscalants will inhibit a wide range of foulants including: calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron. RO Antiscalants are dosed directly to the RO feed water tank or feed water line (after pretreatment) at the recommended dosage of 1-3 mg/L and maximum dosage at 8mg/L, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content. Maximum dilution should be 10% with RO or DI water for temperature less than 30 deg C. For higher temperature the dilution ratio can increase. Key Features and Benefits Inhibit scale formation and effectively controls corrosion Protects the membrane efficiently Enhance the plant operation and equipments life span Economical Easy in usage and handling Our RO Antiscalant (HIGH PH) is a super-threshold RO membrane antiscalant and antifoulant which is able to stabilize a wide range of supersaturated salt solutions, thereby preventing the precipitation on the membrane surface. It reduces the risk of scaling and eliminates the use of hazardous acids,resulting in efficient plant operation with highest possible conversion rate. It is a very effective antiscalant . It is also compatible with RO CHEMICALS series of coagulant and flocculants (polyelectrolytes). Our RO Antiscalant (HIGH PH) is effective in minimizing scaling in presence of foulants like Calcium Carbonate, Sulfate salts of Calcium, Barium, Strontium and Magnesium, Calcium Fluoride, Iron and Silica. Key Features and Benefits Effective scale inhibition Alkalinity builder High recovery rate Low Chemical dosage Cost Effective Effective Iron fouling control by sequestration Reduced frequency of membrane cleaning Compatible with all types of membranes Completely organic and biodegradable Application and Dosage Our RO Antiscalant (HIGH PH) is dosed directly to the RO feed water tank or feed water line (after pretreatment) at the minimum recommended dosage of 1ppm and maximum dosage at 15ppm, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content. In case of high iron content of about 0.5 to 1.0ppm, the dosing has to be increased by 10-15ppm for stabilizing Calcium. At about 10-15ppm dosage our RO Antiscalant (HIGH PH) is capable of fully inhibiting iron and calcium, and silica up to 166ppm. For higher silica content RXSOL ANTISCALANT should be used. Antiscalant RO RXSOL-33-3302-025 Antiscalant C.I ALKA RXSOL-33-2034-025 Membrane Antiscalant ALKA 191T RXSOL-33-3321-030 Antiscalant ORG EV 2030 RXSOL-33-3325-230 Antiscalant RXSOL ORG EV RXSOL-33-3327

Product Short Description: This is a reverse osmosis membrane treatment chemicals . It is highly concentrated polymer chemicals. Product Description: Antiscalant for the protection of RO MEMBRANE. This is a reverse osmosis membrane treatment chemicals. It is highly concentrated polymer chemicals. Antiscalant manufacturer, supplier and Exporter.

Product Short Description: HCl solution for cleaning of RO & UF membranes, neutralization of cleaning alkaline solution Product Description: HCl solution for cleaning of RO & UF membranes, neutralization of cleaning alkaline solution... And also used for cleaning of cooling equipment from various inorganic deposits (e.g. rust, calcium carbonate). Hydrochloric acid is the aqueous solution of hydrogen chloride gas (HCl). It is a strong acid, and the major component of gastric acid. It is also widely used in industry. Hydrochloric acid must be handled with appropriate safety precautions because it is a highly corrosive solution. Hydrogen chloride (HCl) is a monoprotic acid, which means it can dissociate (i.e., ionize) only once to give up one H+ion (a single proton). In aqueous Muriatic acid, the H+joins a water molecule to form a hydronium ion, H3O+: HCl + H2O H3O++ Cl- The other ion formed is Cl-, the chloride ion. Hydrochloric acid can therefore be used to prepare salts called chlorides, such as sodium chloride. Hydrochloric acid is a strong acid, since it is fully dissociated in water. Monoprotic acids have one acid dissociation constant, Ka, which indicates the level of dissociation in water. For a strong acid like HCl, the Ka is large. Theoretical attempts to assign a Ka to HCl have been made.[3]When chloride salts such as NaCl are added to aqueous HCl they have practically no effect on pH, indicating that Cl-is an exceedingly weak conjugate base and that HCl is fully dissociated in aqueous solution. For intermediate to strong solutions of hydrochloric acid, the assumption that H+molarity (a unit of concentration) equals HCl molarity is excellent, agreeing to four significant digits. Of the seven common strong acids in chemistry, all of them inorganic, Hydrochloric acid is the monoprotic acid least likely to undergo an interfering oxidation-reduction reaction. It is one of the least hazardous strong acids to handle; despite its acidity, it produces the less reactive and non-toxic chloride ion. Intermediate strength Hydrochloric acid solutions are quite stable, maintaining their concentrations over time. These attributes, plus the fact that it is available as a pure reagent, mean that Hydrochloric acid makes an excellent acidifying reagent and acid titrant (for determining the amount of an unknown quantity of base in titration). Strong acid titrants are useful because they give more distinct endpoints in a titration, making the titration more precise.