Your shopping cart is empty.
ACC9 Air Cooler Chemical is a powerful emulsify cleaning solvent emulsion cleaner for cleaning of diesel engine air coolers, Oily contaminated parts scavenging air systems and compressor. Air Cooler Chemicals ACC-009 is a liquid compound consisting of specific corrosion inhibitors , to protect SOFT METAL
Air Cooler ACC9 Chemicals is concentrate solvent based water soluble emulsion cleaner for cleaning of Air coolers, Scavenging air systems and turbochargers of diesel engine.
During the operation, the fins & tubes of the main engine air cooler which become fouled with oil, grease, dust and carbonaceous deposit , which will affect cooler efficiency and damage the system. AIR COOLER chemical CLEANER ACC 9 is specialized and concentrated product which is effectively cleans diesele engine change air cooler whether it is " MANUAL or IN SERVICE.
For effective cleaning of air coolers, scavenging air systems and turbo chargers of diesel engines.
3 to 5 litres of cleaning solution per square meter or as table below:
Engine HP. Solution of RXSOL 009
6,000 to 12,000 2 to 3 litre
12,000 to 24,000 4 to 5 litre
24,000 or more 5 to 6 litre
In General : Depending upon contamination 10-25% with fresh water.
OPTIONAL : Dependant on design, the cooler is flooded with AIR COOLER CHEMICAL CLEANER immersed in a tank full of product.
Field :: - AHU, FCU, Air Conditioners, Car Condenser and Radiator, Air Cooled Chillers, Air Cooled Condensers, Air Cooler Tube Bundle etc.
Air Cooler Chemical enabling excellent penetration of the product into the coils for complete cleaning that instantly shows multiple increase of CFM/Air Velocity.
Application
Immersion bath
Atleast for 2 Hrs deep COOLER PARTS in to AIR COOLER CHEMICAL CLEANER emulsion tank. The product should be heated to approx. 50°C and agitation provided with an air line. Then drain off and flush well with water, followed by drying with an air line.
Soak method: Machine parts with stubborn carbon deposits to be cleaned is dipped into conc.Soln.of ACC then allow deposits to. Be broken down and loosened before removal, then rinse .
Circulation method
Some designs of cooler can be circulated "in situ". In this case a pump tank and pipe system is fitted permanently or connections are provided for connecting a temporary circuit. The system should be filled with AIR COOLER CHEMICAL CLEANER circulation carried out for 2 - 4 hours at a temperature of upto 50°C. After cleaning the cooler should be thoroughly flushed with fresh water and dried with an air line.
Note: Both cleaning methods benefit from heat of up to 50°C and cleaning times can be reduced or extended dependant on temperature and degree of fouling.
Hand spray Cleaning: By Hand spray,apply concentrate RXSOL-16-0009-210 all over the cooler coils. for good emulsification & penetration. Allow the RXSOL-16-0009-210 for a minimum of 1 hour,then use a high pressuure water to wash off the loosened deposits. During process always keep drain valve open. After satisfactory cleaning, and flushing through with fresh water, close air cooler drains.Note that during this process the engine must be stopped.
ACC9 is industrial equipment maintenance air cooler chemical cleaner for cleaning of the diesel engine charge Air cooler. ACC9 is Light yellow to brown colored water-soluble solvent, which emulsifies with water. ACC9 is blend of the selected specified solvent mixture which is safe in contact with all metals.
ACC-9 Air Cooler Chmeical Cleaner Principally works as follows :
Non Corrosive Solvent present in ACC9 helps to dissolve all deposits, oil, greasy materials. While emulsifier increases Detergency property to enhance cleaning action of ACC-9. And the presence of inhibitors in ACC9 Air Cooler Cleaning Chemical protect soft metal, we can say INHIBITOR makes solution safe to contact with all metals.