Educational Use Only - Order On Request

Zinc Carbonate

Product Code: RXSOL-81-8158-025

Product Short Description

The fine particle-size-distribution of zinc carbonate results in a maximum amount of surface area for fast, efficient sulfide scavenging and is effective in water-base and oil- or synthetic-base fluids.

Remarks

The initial treatment of zinc carbonate is usually 1.5 to 3 lb/bbl (3.75 to 8.0 kg/m3), depending on requirements. Subsequent field treatments should be based on approximately 1 lb/bbl (2.85 kg/m3) of zinc carbonate per 800 mg/L of sulfides detected.

One hundred kilograms (kg) of zinc carbonate reacts with approximately 25 kg of hydrogen sulfide. Use a Garrett Gas Train and proper Dräger tubes to measure the sulfide content. Zinccarbonate scavenger should be added through the hopper.

The product has a fine particle size and good dispersibility which minimizes reaction time. The use of excessively high pH (>11.5) should be avoided when using zinc carbonate scavenger in water-base fluids, as extreme viscosity increases are likely.
• Is not pH-dependent; it is effective at alkaline pH, such as 10 to 11, whereas iron materials are less so
• Helps remove the hazard of dangerous H2S gas escaping to the surface
• Lessens the possibility of hydrogen embrittlement occurring on downhole tubulars
• zinc carbonate can be used in oil- and synthetic-base fluids, but pilot testing is recommended

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...

Educational Use Only - Order On Request

Paraffin Wax Emulsifier

Product Code: RXSOL-81-8170-210

Product Short Description

Emulsifier

Other Equivalent Brand

Emulsifier E 300

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...

Educational Use Only - Order On Request

Iron Control

Product Code: RXSOL-81-8167-210

Product Short Description

Iron Control

Other Equivalent Brand

Ferrotrol 210

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...

Educational Use Only - Order On Request

Corrosion Inhibitor Intensifier Hytemp O

Product Code: RXSOL-81-8166-210

Product Short Description

Corrosion Inhibitor Intensifier Hytemp O intensifier can be used from ambient temperature up to 400°F in Acidic medium like HCl / HF-based fluids.

Other Equivalent Brand

Hy Temp O Additive

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...

Educational Use Only - Order On Request

Corrosion Inhibitor CI 2700

Product Code: RXSOL-81-8165-210

Product Short Description

Film forming type, corrosion inhibitor. The dosing rate of corrosion inhibitor shall be 6-12 ppm (g/m3) based on the flow rate of product being transported through the pipelines.

Other Equivalent Brand

Corrosion Inhibitor CI 27, NALCO/EXXON 5403, UNICOR J, SPEC-AID 8Q22, TOLAD 4410

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...

Educational Use Only - Order On Request

Flocculant Anionic Polymer DAF

Product Code: RXSOL-81-8163-220

Product Short Description

Effective as a flocculant in various liquid/solid separation applications, such as clarification, dissolved air flotation, and sludge dewatering of inorganic sludges.

Remarks

Usage: 

1.For industrial wastewater treatment and recycle. It has special efficacy for the Settlement of positive charge metal oxides.The usage amount is Just 1% of traditional flocculating agents and the efficiency is perfect. Such as steel mill,Metallurgical Plant and coal washery waste water. 
2.Settlement of river sediment / streamsediment
3.Retention and drainage aids, as well as dry strength agent in the Papermaking industry 

Other Equivalent Brand

CORE SHEL 71325, ANIONIC FLOCCULANT, Hyperfloc AE120

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...

Educational Use Only - Order On Request

Antioxidant A 1076

Product Code: RXSOL-81-8161-025

Product Short Description

It is an effective, non-discoloring stabilizer that provides excellent long-term heat stability by preventing thermo-oxidative degradation during processing and service life.

Remarks

Packaging:

Antioxidant A 1076 is available in powder form in a 25 kg  net weight, with an inner PE liner.

Storage:

This product may be stored up to two years in a sealed container. Containers should be stored in a cool, dry area. Extended storage at elevated temperatures or exposure to direct heat or sunlight could reduce product life. Keep containers sealed when not in use.

Toxicity & Safety:

This material is not intended for use in products for which prolonged contact with mucous membranes or abraded skin, or implantation within the human body is specially intended, unless the finished product has been tested in accordance with the Food and Drug Administration and/or other applicable safety testing requirements. Because of wide range of such potential uses, Rx Marine International is not able to recommend this material as safe and effective for such uses and assumes no liability for any such uses. Read and understand the Material Safety Data Sheet before using or handling this product.

FDA Regulations: Supplement

 

Existing Regulations Maximum Concentration Thickness Food Allowed Temperatures Allowed
Antioxidant for polymers,        
Olefin copolymers complying with 177.1520 (c), excluding primarily non-crystalline copolymers described in items 3.4 and 3.5 0.25% no restrictions no restrictions no restrictions
Olefin polymers complying with 177.1520 (c), item 3.4 0.25% no restrictions all foods for which polymer is approved no restrictions
Olefin polymers complying with 177.1520 (c), item 3.5 0.25% no restrictions non-fatty foods no restrictions
Adhesives complying with 175.105 no restrictions no restrictions no restrictions no restrictions
Semi-rigid and rigid acrylic and modified acrylic plastics complying with 177.1010 0.01% no restrictions no restrictions no restrictions
Semi-rigid and rigid acrylic and modified acrylic plastics complying with 177.1010 0.2% no restrictions foods containing no more than 15% alcohol no restrictions
Polystyrene and rubber-modified polystyrene complying with 177.1640 0.25% no restrictions

no restrictions except for fatty foods

In fatty foods the finished rubber modified polystyrene polymers shall contain not less than 85 weight percent of total polymer units derived from styrene monome

no restrictions
Acrylonitrile-butadiene-styrene copolymers (used in accordance with prior sanction or in compliance with 174-178 and 179.45) 0.5% no restrictions no restrictions no restrictions
Semi-rigid and rigid vinyl chloride plastics modified with methacrylate butadiene-styrene copolymers complying with 178.3790 0.05% no restrictions no restrictions no restrictions
Rigid polyvinyl chloride 178.3790 0.2% no restrictions no restrictions no restrictions
Polycarbonate resins complying with 177.1580 0.3% no restrictions no restrictions room temperature or below fill and storage
Ethylene-vinyl acetate copolymers complying with 177.1350 0.1% no restrictions no restrictions no restrictions
Nitrile rubber-modified acrylonitrile-methyl acrylate copolymers complying with 177.1480 0.2% no restrictions no restrictions 150°F max.
(as for polymer)
Styrene block polymers complying with 177.1810 0.3% no restrictions all foods for which polymer is allowed 150°F max.
Vinylidene chloride homopolymers and/or vinylidene chloride copolymers complying with regulations in Parts 175, 176, 177, 179, and 181. The vinylidene chloride copolymers shall contain not less than 50% of total polymer units derived from vinylidene chloride 0.2% no restrictions no restrictions no restrictions
Chlorinated isobutylene isoprene complying with 177.1420 (a) (3) 0.025% no restrictions no restrictions no restrictions
Rubber articles complying with 177.2600 0.5% no restrictions no restrictions no restrictions

Other Equivalent Brand

Sumilizer BP 76;Irganox 1076;Antioxidant 1076;Ultranox 276;Naugard 76;Mark AO 50

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...

Educational Use Only - Order On Request

Resin Oil Soluble

Product Code: RXSOL-81-8169-025

Product Short Description

Oil Soluble Resin

Other Equivalent Brand

Oil Soluble Resin OSR 100

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...

Educational Use Only - Order On Request

Potassium Silicate Solution

Product Code: RXSOL-81-8162-260

Product Short Description

Suitable for Oilfield applications include well conformance, cementing, treatment/remediation, and enhanced oil recovery.

Other Equivalent Brand

Silicate K66 Potassium

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...

Educational Use Only - Order On Request

Demulsifier ORG

Product Code: RXSOL-81-8159-210

Product Short Description

Power of Chemical to break EMULSION in two phase hydrocarbon phase (oil) and a water-phase. Dosage and application will vary based on emulsion characteristics. For most crude or fuel oil based emulsions, a starting concentration of 0.1% at 165°F with a minimum heated recirculation contact time of 2

Other Equivalent Brand

OWT 8-2276, EMULSOTRON KXZ-1654

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...