STORAGE & HANDLING

pH booster should be stored in an air tight container away from direct heat.
Always store at cool & dry place.
Handle using goggles & do not breathe in the vapours.
Wash thoroughly in case of contact. Do not swallow.
 

pH Control

Maintenance of proper pH throughout the boiler feedwater, boiler, and condensate systems is essential for corrosion control. Most low-pressure boiler system operators monitor boiler water alkalinity because it correlates very closely with pH, while most feedwater, condensate, and high-pressure boiler water requires direct monitoring of pH. Control of pH is important for the following reasons:

• corrosion rates of metals used in boiler systems are sensitive to variations in pH
• low pH or insufficient alkalinity can result in corrosive acidic attack
• high pH or excess alkalinity can result in caustic gouging/cracking and foaming, with resultant carryover
• speed of oxygen scavenging reactions is highly dependent on pH levels

The pH or alkalinity level maintained in a boiler system depends on many factors, such as sys-tem pressure, system metals, feedwater quality, and type of chemical treatment applied.

The corrosion rate of carbon steel at feedwater temperatures approaches a minimum value in the pH range of 9.2-9.6 . It is important to monitor the feedwater system for corrosion by means of iron and copper testing. For systems with sodium zeolite or hot lime softened makeup, pH adjustment may not be necessary. In systems that use deionized water makeup, small amounts of caustic soda or neutralizing amines, such as morpholine and cyclohexylamine, can be used.

In the boiler, either high or low pH increases the corrosion rates of mild steelThe pH or alkalinity that is maintained depends on the pressure, makeup water characteristics, chemical treatment, and other factors specific to the system.

The best pH for protection of copper alloys is somewhat lower than the optimum level for carbon steel. For systems that contain both metals, the condensate and feedwater pH is often maintained between 8.8 and 9.2 for corrosion protection of both metals. The optimum pH varies from system to system and depends on many factors, including the alloy used 

To elevate pH, neutralizing amines should be used instead of ammonia, which (especially in the presence of oxygen) accelerates copper alloy corrosion rates. Also, amines form protective films on copper oxide surfaces that inhibit corrosion.

Did you know, how to keep BOILER water CLEAR and Sludge free?

RXSOL BOILPLEX AT Phosphate and synthetic polymer Based Boiler water treatment chemicals to control sludge for low and medium pressure Boilers which results in the clean boiler water. USES of RXSOL BOILPLEX AT Hardness Control provide tolerance of feedwater quality fluctuations.

Chemically one part of The polymers used in BOILPLEX AT  keeping the sludge particles soft by increasing property of nonadherent which also resulting smooth blowdown during boiler cleaning and maintenance operation.


While Other part of Phosphate which is used in BOILPLEX AT serve as deposit control agents by Iron dispersancy, main cause of sequestering deposits.

USES of RXSOL BOILPLEX AT boiler water treatment, can help BOILER WATER CLEAN and CLEAR.

Diethylhydroxylamine (DEHA) is an organic compound with the formula (C2H5)2NOH. It is a colorless liquid, although it is usually encountered as a solution. It is mainly used as an oxygen scavenger in water treatment. It is a volatile oxygen scavenger and reacts in a ratio of 2.8/1 DEHA/O2. It is employed in high pressure (>70 bar) boiler systems due to a very low rate of reaction at low temperatures and pressures. Due to its volatility, it acts as an oxygen scavenger throughout the entire boiler system due to steam carryover. DEHA also reacts with ferrous metals to form a passivized film of magnetite throughout the boiler system.

The solution of Sodium Sulphide obtained from the process is concentrated to 10-12% and is available at different percentages in tanker loads. In Industries Na2S is produced by carbothermic reduction of sodium sulfate often using coal. It is used in the production of rubber chemicals, sulfur dyes and other chemical compounds. It is used in other applications including ore flotation, oil recovery, making dyes, and detergent.

Applications of Boiler Hydrocarbon Oil Sludge Remover

1. Boiler Cleaning

The product can be used for cleaning boilers contaminated with hydrocarbon oil and oily sludge. Proper cleaning can help restore heat-transfer surfaces and improve boiler-water circulation.

2. Oil-Fouled Heat Exchangers

Oil and hydrocarbon deposits can reduce heat-transfer efficiency. Specialized cleaning formulations can help remove oily contamination from suitable heat-exchanger surfaces.

3. Steam Boiler Systems

Industrial steam boilers may require periodic cleaning when oil contamination affects boiler-water quality or internal surfaces.

4. Hot Water Boilers

Hydrocarbon sludge removers can also be used in selected hot-water heating systems where oil contamination has accumulated.

5. Boiler Pipelines and Circulation Systems

Oily deposits can accumulate in circulation lines, low-flow areas, valves, and associated equipment. A suitable chemical cleaning program can help loosen and disperse these contaminants.

6. Marine Boilers

In marine applications, boiler systems can experience contamination from fuel oil, lubricants, and other hydrocarbons. Boiler hydrocarbon sludge remover can be used as part of a planned marine boiler cleaning and maintenance program, subject to equipment and material compatibility.

Sludge Conditoner for Boiler Water manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Sludge Conditoner for Boiler Water at a competitive price from us. We have ready stock of Sludge Conditoner for Boiler Water in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Boiler Treatment Chemicals ONE STOP SOLUTION   ::: https://rxchemicals.com/Boiler-treatment-chemicals-INDIA-One-Stop-Boiler-Maintenance-Solutions