Product code RXSOL-90-8150-025Category Asphalt Release / Products

Price and availability on request. Send us the quantity and delivery location in Oman.

Request infoGet MSDSGet technical bulletin

Overview

A non-ionic water-based emulsion designed for effective mold release in cast polyurethane elastomer applications, providing multiple releases per application with clean surface finish and broad material compatibility.

Product description

Mold Release Agent a high-performance non-ionic silicone emulsion specifically designed for use as a mold release agent in cast polyurethane (PU) elastomer applications. It provides excellent release properties, surface finish, and mold protection without interfering with curing or post-processing operations.

The non-ionic nature ensures broad compatibility with PU systems, pigments, fillers, and additives, while minimizing surface defects, buildup, and transfer.

Applications

Mold Release Agent is widely used for:
  • Cast polyurethane elastomers
  • PU rollers, wheels, bushings
  • Industrial PU parts
 
Mold Release Agent also suitable for:
  • Metal molds
  • Epoxy molds
  • Silicone and composite molds (after compatibility check)

Dosage

How to use RXSOL Mold Release Agent

  1. Clean mold thoroughly before first use
  2. Dilute product with clean water as recommended
  3. Apply by: Spray or Brush
  4. Wipe with lint-free cloth
  5. Allow to dry completely before casting
  6. Reapply as required based on cycle count
Compatible with:
  • Polyester-based PU systems
  • Polyether-based PU systems
  • Filled and unfilled formulations
  • Not recommended to mix directly into PU resin
  • Compatibility testing advised before large-scale use

Dilute the product using water with a hardness not exceeding 250 ppm (expressed as CaCO₃), adjusting the dilution level according to the intended application technique, such as spray or pad application. The molds should be completely clean before treatment. Typically, one treatment with Mold Release Agent will remain effective for two to ten molding cycles, depending on the design complexity of the mold and the type of material being molded.

Also known as

BLUESIL EMUL 1803, Mold Release Agent, Release Agent DH-T3170

Remarks

Key Features of RXSOL Mold Release Agent Emulsion

  • Excellent mold release performance for PU elastomers
  • Non-ionic – compatible with most polyurethane systems
  • Produces smooth, defect-free surfaces
  • Reduces mold fouling and buildup
  • Improves mold life and productivity
  • Water-based, low VOC, non-flammable
  • Does not interfere with painting, bonding, or post-finishing when properly used

Where we supply

Oman. Stocked at our warehouse in Barka, South Al Batinah, and supplied to Muscat, Ruwi, Mutrah, Seeb, Rusayl, Barka, Sohar, Shinas, Saham, Buraimi, Nizwa, Ibri, Sur, Salalah, Duqm, Khasab and every other governorate.

Ports and free zones. Port Sultan Qaboos (Mutrah), Mina Al Fahal, Sohar Port and Freezone, Port of Salalah and Salalah Free Zone, Port of Duqm and the Duqm Special Economic Zone, Port of Sur, Khasab Port and Al Mazunah Free Zone.

Industrial areas. Rusayl, Sohar, Barka (Sanaya), Raysut (Salalah), Nizwa, Sur, Buraimi and Duqm industrial estates, Knowledge Oasis Muscat, and oil and gas sites across Oman.

Beyond Oman. We have branches in the UAE (including Fujairah) and in India (Kandla, Kolkata, Visakhapatnam, Chennai and Mumbai), and we also supply to South Africa.