Product code RXSOL-70-7015-025Category Fuel Treatment

Price and availability on request. Send us the quantity and delivery location in Oman.

Request infoGet MSDSGet technical bulletin

Overview

GAS SIDE CLEANER is sprayed undiluted on a completely dry area on to the upper most point of the system.

Product description

GAS SIDE CLEANER Rx is sprayed undiluted on a completely dry area on to the upper most point of the system. It contains a “clinging agent” and will run around tubes/fins and drain onto the next bank. A steady spray on the top area should be maintained until the complete unit is soaked. Very large systems may require spraying at different sections.

Applications

GAS SIDE CLEANER RX is primarily intended for use in motor vessel exhaust gas heat recovery units of all designs. It can be used to clean fouled exhaust trunks. It is fully effective when used to wash down auxiliary and main boilers from the uptakes, through economizers, generating tube banks, superheaters, membrane walls, water walls and furnaces. It contains an additive to assist in the removal of vanadium.

Dosage

DIRECTIONS FOR USE

GAS SIDE CLEANER RX is sprayed undiluted on a completely dry area on to the upper most point of the system. It contains a “clinging agent” and will run around tubes/fins and drain onto the next bank. A steady spray on the top area should be maintained until the complete unit is soaked. Very large systems may require spraying at different sections.

Please note: GAS SIDE CLEANER cannot be used after cleaning with water.

Also known as

Gas Side Cleaner

Notes

Future & Benefit ::

  • Rapid and complete removal of soot
  • Neutralises acidic components
  • Reduces casing drain blockages
  • Maintains thermal efficiency of unit
  • Greatly reduces fire risks
  • Rapid removal of carbon and sulphur build-up

Remarks

CLEANING PROCEDURE
 

  • Check if the casing drains to the bilge are open and clear (as applicable)
  • Open the turbocharger casing drain to the bilge (as applicable)
  • Prepare spray equipment and connect gas side cleaner drum
  • Spray gas side cleaner starting from the highest points, ensuring that enough product is applied to allow thorough wetting of tubes/fins below and especially out of sight
  • Allow soaking for 30 - 60 minutes
  • Wash off deposits, starting from the highest point, using a fresh water jet
  • Keep checking the drains of the casings during wash down
  • Inspect system thoroughly, repeat if necessary

Where we supply

Oman. Stocked at our warehouse in Barka, South Al Batinah, and supplied to Muscat, Ruwi, Mutrah, Seeb, Rusayl, Barka, Sohar, Shinas, Saham, Buraimi, Nizwa, Ibri, Sur, Salalah, Duqm, Khasab and every other governorate.

Ports and free zones. Port Sultan Qaboos (Mutrah), Mina Al Fahal, Sohar Port and Freezone, Port of Salalah and Salalah Free Zone, Port of Duqm and the Duqm Special Economic Zone, Port of Sur, Khasab Port and Al Mazunah Free Zone.

Industrial areas. Rusayl, Sohar, Barka (Sanaya), Raysut (Salalah), Nizwa, Sur, Buraimi and Duqm industrial estates, Knowledge Oasis Muscat, and oil and gas sites across Oman.

Beyond Oman. We have branches in the UAE (including Fujairah) and in India (Kandla, Kolkata, Visakhapatnam, Chennai and Mumbai), and we also supply to South Africa.