Price and availability on request. Send us the quantity and delivery location in Oman.
Overview
Powerful cleaner to treat metal and ceramic oil filters, which suffer from oil depositions, carbonized oil accumulation and sludge. Heavy duty liquid , which is Extremely and effectively removes tenacious carbon deposits, burnt grease, Oily residues
Product description
RXSOL -16-1007-025 is a specially product formulated by strong emulsifying agents, surfactants and powerful solvents to treat metal and ceramic oil filters, which suffer from oil depositions, carbonized oil accumulation and sludge. Heavy duty liquid , which is Extremely and effectively removes tenacious carbon deposits, burnt grease, Oily residues and lacquers , from fuel oil and lube oil purifiers, filters, separators. Very usefull to clean fuels recipitation of paraffin and asphalt or with lubricating oils mixing of different types of oil can form solid encrustations on the mesh. It is heavy duty emulsifying liquid , which is Extremely and effectively removes tenacious carbon deposits, burnt grease, Oily residues and lacquers , from fuel oil and lube oil purifiers, filters, separators. Effective cleaning of fine meshes is achieved by soaking in RXSOL-16-1074-025 followed by blasting with compressed air using a cleaning gun.
Applications
The Rxsol -16-1007-025 to be used depends on two factors: the volumetric capacity of the filter to be cleaned and the degree of deposition/contamination in the filter. In the first case, the dosage must equal the filter capacity. In the second case, the dosage must be corresponding to the desired degree of cleaning.
Application and use :
The RXSOL -16-1007-025 to be used depends on two factors: the volumetric capacity of the filter to be cleaned and the degree of deposition/contamination in the filter. In the first case, the dosage must equal the filter capacity. In the second case, the dosage must be corresponding to the desired degree of cleaning.
RXSOL -16-1007-025 use by the circulation or immersion method. If using the circulation method, determine the filter capacity and circulate at a constant rate for 6–20 hours. If using the immersion method, let the filter soak in enough quantity of Rxsol -16-1007-025, analogous to the degree of contamination, for a time of 6–20 hours. The Temperature of Cleaning solution should not be allowed to exceed 60 °C.
Cleaning process and requirement of time depends on the type of the contamination. With fuels recipitation of paraffin and asphalt or with lubricating oils mixing of different types of oil can form solid encrustations on the mesh.
RXSOL -16-1007-025 can be undercooled or overheated during storage but remains fully usable when returned to normal temperature.
MESH CONTAMINATED WITH HEAVY OIL:
Elements contaminated with heavy oil must be soaked in a standard commercial aromatic solvent. After soaking the elements are cleaned by high pressure Cleaning Device using RXSOL-16-1095-025 solution.
Industries and related products
HOW TO USE Filter CLEANER?
For maintaining optimal engine performance Cleaning o reusable lube oil filter is very important. Proper maintenance and cleaning of FILTER also increasing lifespan of ENGINE.
1st of all Ensure the engine is off and keep soft bristle brush, compressed air (if available), and protective gloves.
Then Remove by unscrewing the Oil Filter from circulating system then completely Drain Oil: Place a drain pan beneath the oil filter to catch any residual oil.
2nd Cleaning the Filter Element:
Apply Cleaner: Spray the cleaning agent onto both sides of the filter element, focusing on the dirty side.
Soak: Allow the cleaner to penetrate for about 10 minutes to loosen contaminants.
Rinse: Rinse the filter with low-pressure water from the clean side out to flush out debris.
Brush: For stubborn debris, gently use a soft-bristle brush to dislodge particles from the filter surface.
3. Drying the Filter: Use air compressor to remove excess of chemical liquid and moisture and then keep FILTER to dry fully.
4. Reinstall Filter: Screw the filter back into place, ensuring it's securely tightened.
5. After Cleaning Steps: Refill Oil: Replace any lost oil to maintain the correct oil level.
NOTE : Regularly cleaning your reusable oil filter ensures efficient filtration and contributes to the longevity of your engine. Always consult your equipment's manual for specific instructions related to your model.
Dosage
May be used directly or diluted in the ratio of 1 part concentrate to 5 parts water, ( or 1 . Ratio of any solvent like diesel ).Rxsol -16-1007-025 use by the circulation or immersion method. If using the circulation method, determine the filter capacity and circulate at a constant rate for 6–20 hours. If using the immersion method, let the filter soak in enough quantity of Rxsol -16-1007-025, analogous to the degree of contamination, for a time of 6–20 hours. The Temperature of Cleaning solution should not be allowed to exceed 60 °C.
Also known as
RXSOL 79127 , Care Clean Filter, Care clean Filter, Filter Cleaner, Eazy Filter Cleaner
Notes
Future and Benifit
• Non–corrosive and safe to use in all types andkinds of filters.
• Preserves, protects and maintains the operational capabilities of the filter by thorough and complete cleaning.
• Provides quick and efficient action.
• Its pure, high quality components readily remove oil and grease deposits, even when dry.
• Can be combined with a specific range of products.
• Safe to use on all metals and their alloys as well as those with inorganic clay finishes.
• Attacks and dissolves water/oil emulsions and concentrations.
• Cost effective, easy to apply and use.
Remarks
Effectively removes tenacious carbon deposits, burnt grease, Oily residues and lacquers , from fuel oil and lube oil purifiers, filters, separators
Where we supply
Oman. Stocked at our warehouse in Barka, South Al Batinah, and supplied to Muscat, Ruwi, Mutrah, Seeb, Rusayl, Barka, Sohar, Shinas, Saham, Buraimi, Nizwa, Ibri, Sur, Salalah, Duqm, Khasab and every other governorate.
Ports and free zones. Port Sultan Qaboos (Mutrah), Mina Al Fahal, Sohar Port and Freezone, Port of Salalah and Salalah Free Zone, Port of Duqm and the Duqm Special Economic Zone, Port of Sur, Khasab Port and Al Mazunah Free Zone.
Industrial areas. Rusayl, Sohar, Barka (Sanaya), Raysut (Salalah), Nizwa, Sur, Buraimi and Duqm industrial estates, Knowledge Oasis Muscat, and oil and gas sites across Oman.
Beyond Oman. We have branches in the UAE (including Fujairah) and in India (Kandla, Kolkata, Visakhapatnam, Chennai and Mumbai), and we also supply to South Africa.
