Product code RXSOL-16-1008-010Category Deck cabin galley Maintenance

Price and availability on request. Send us the quantity and delivery location in Oman.

Overview

Formulated to remove rust and water scale build up from boiler evaporators, heat exchangers, cooling systems, pipeline collection system etc

Product description

Specifically formulated to remove rust and water scale build up from boiler evaporators, heat exchangers, cooling systems, pipeline collection system etc. It is a superior balance formulated heavy duty POWDER acid containing accelerators, corrosion inhibitors & wetting agents. Highly effective on heating. Safe and easy handling and storage . Fast and effctive scale remover .

-   Non-combustible solid
-   Smoke from fires is irritating
-   Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions
-   Prevent run off water from entering drains if possible

Scale and Rust Remover (Powder)

Applications

Boilers, calorifiers, heat exchanges, diesel engine cooling system, condensers, evaporators & other type of equipment where rust & scale form. 

Appearance Reddish / Yellowish / white – Powder ( without indicator )  

Density         1.2g/cm3
pH                 (10 wt %):1.1
Compatibility
Metal    Avoid aluminium, zinc, tin and their alloys. Avoid galvanised surfaces Rubber No known effect
Rubber No known effect

Dosage

This is mixed with fresh water 3 to 20 percent depending on deposition of scaling. After using SA-1008, sense all metal surfaces with 0.5 percent of RXSOL-54-1008-025 at least 2-4 house , up to neutrial of PH valve.
 

Procedure-of-use: The most effective descaling is accomplished by circulation.In the case of small components,the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease or sludge, then pre-cleaning with DEGREASER ( RXSOL OB 1005 ) is necessary. Depending on the extent of scaling, use a solution of 2.5-10% RXSOL-54-1008-025 . The solution will have a red colour which changes to orange when 85% of the acid has been neutralized , & to colourless  when the solution is totally neutralized. Whenever possible, the solution should be heated to 60°C.Neutralised  solutions can be re-activated by adding more RXSOL-54-1008-025  until the red colour reappears. This should not be done more than twice. RXSOL-54-1008-025  should not be used on Aluminium , Zinc, Tin or Galvanized surfaces.

Fields: Descaling of  Boilers, Descaling  of Diesel Engine Cooling Systems, Condenser, Pipeline collection system, Evaporators, Calorifiers, Heat Exchangers,The strength of the acid can be enhanced by adding 1part sodium chloride (common salt) to 20 parts of Descalex.If salt is not available, an acceptable alternative is to dissolve RXSOL-54-1008-025  in sea water. After use of RXSOL-54-1008-025  a  0.5% solution of Alkalinity Control in fresh  water should be used for neutralization.

Also known as

Lime Out Powder, Descalex Powder 25 Kg, Careclean Descalex P, AQUATREAT 3120 Powder Descalant, Descaler Powder TM, Saf-D Scale Powderd Acid Cleaner

Notes

Characteristic:
-Powder product-safe and easy handling and storage.   
-Fast and effective scale remover,It is water-soluble,non-flammable, non-volatile and non-hydroscopic Inhibitors
-protect metals. Requires no heating unless its activity is required to increase fast.Contains anti-foam agent . 
-Colour indicator shows solution strength.
-Removes scale from boilers.                                                                                                 
-Removes scale from Diesel Engine cooling systems.                                                                                   
-Removes scale and rust from Condensers, Evaporators,Heat Exchangers etc.



 


 

Remarks

For DESCALING OF PIPELINES of Cooling Systems, use RXSOL DESCALEX POWDER

Recommended concentration: 3-8% by weight, depending on scale severity

Scale Condition Concentration
Light scale (maintenance clean) 2-3%
Moderate scale 4-5%
Heavy scale (visible thick deposits) 6-8%

For most cooling systems with routine mineral scale (calcium carbonate, etc.), 5% is a good general-purpose starting point - that's roughly 100 kg for 2,000 L.

A few important operating notes,:

  1. Circulation time: Typically 2-3 hours of circulation, checking pH periodically. Stop when pH stabilizes (acid is spent/scale dissolved) or after visual/lab confirmation.
  2. Monitor progress: Check pH and iron/copper ion concentration in solution periodically (test strips or lab titration) rather than fixing a blind circulation time - stop as soon as scale is gone rather than over-circulating.
    • Following the acid clean with a neutralization/passivation step - commonly a mild alkaline flush (e.g., sodium carbonate/soda ash, ~0.5–1%) to raise pH to neutral and form a protective passive layer on the iron/steel before refilling with treated water.
  3. Rinse thoroughly after neutralization before returning to normal operation.

Where we supply

Oman. Stocked at our warehouse in Barka, South Al Batinah, and supplied to Muscat, Ruwi, Mutrah, Seeb, Rusayl, Barka, Sohar, Shinas, Saham, Buraimi, Nizwa, Ibri, Sur, Salalah, Duqm, Khasab and every other governorate.

Ports and free zones. Port Sultan Qaboos (Mutrah), Mina Al Fahal, Sohar Port and Freezone, Port of Salalah and Salalah Free Zone, Port of Duqm and the Duqm Special Economic Zone, Port of Sur, Khasab Port and Al Mazunah Free Zone.

Industrial areas. Rusayl, Sohar, Barka (Sanaya), Raysut (Salalah), Nizwa, Sur, Buraimi and Duqm industrial estates, Knowledge Oasis Muscat, and oil and gas sites across Oman.

Beyond Oman. We have branches in the UAE (including Fujairah) and in India (Kandla, Kolkata, Visakhapatnam, Chennai and Mumbai), and we also supply to South Africa.