Primary tabs

on 09 Jun 2020 1:36 PM
  • Foam Agent / Booster Manufacturer in Oman

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of Foam Agent / Booster in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:

Foam Agent / Booster : RXSOL-22-3020-210
Very effective High foam booster emulsifier – based cleaner for use in hold cleaning and general digressing. its heavy molecular surfactants rapidly react with water and produce an effective high foam cleaning solution.May be applied by brush, hand spray and by high and low-pressure washing machines.


Product Application:
Applications:-RXSOL Suitable for cleaning engine components like fuel and  Lube oil filters, Injection nozzles, pump components, inlet  and  exhaust valves &  primarily refers to cleaning of  hard surfaces, such as Decks, Tanks, Engine-rooms,  etc. can be used for all  types of cleaning and degreasing and  may be applied by brush, handspray, high and low pressure washing machines etc.

Directions for Use and Dose Rates:
General Cleaning:- This can be used for all types of cleaning &  degreasing & may  be applied by  Brush, Hand spray, high and low pressure washing machines etc. Time necessary for cleaning depends on the nature and  thickness of the deposits. 20-30 min. will suffice for   most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If  the cleaning  solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the degassing procedure must be repeated. Depending on the degree of contamination RXSOL should be mixed with warm water at a rate of 50-200 ml   per 10 litres. i.e. 1 cup of RxTuff to a bucket of water. RXSOL solution can  be applied  simply by mops, brushes or rags, or by dipping the soiled articles into  the RXSOL solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, RxTuff is not recommended for washing machines.                        

Method of Application and Dose Rates:-
Direct injection method for pressure washing machines. Dose rate 1-5 litres per ton wash water (0.1-0.5%).
Spot cleaning. Hand spray neat or diluted with up to 5 parts water and leave for several minutes before rinsing off with clean water.


Product Note:
Whenever possible, the cleaning solution should be heated to 60-80°C.If this method is not possible, other conventional methods such as separate rate direct injection, recirculation  or hand spraying provide acceptable options.For boiler fire side cleaning, a 10-20 % hot  solution, (temp. above 40°C),  should   be sprayed on  to  the surfaces to be cleaned. Allow to  penetrate for 20 minutes and flush off. For deposits  which are very hard to remove, increase the concentration to 50% and repeat if necessary.

Product Technical Specification:
It is a superior heavy duty and highly concentrated water-based FOAM cleaner. RXSOL is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevent the corrosion of metals. It is a low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials .
Ideal for difficult cleaning problems faced in industrial and other plants,  Very effective degreaser which removes dirt, oil and grease from the equipment, parts, components, engines, floors and walls etc.
The Importance of HIGH FOAM  by High-Pressure Cleaning
The job of high pressure cleaning can be done easier & quicker by simply using RXSOL correct dosages. Using a high pressure cleaner alone, without any CLEANER, will not  achieve  optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard  surfaces, such  as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:
Step 1:  Spraying the  RXSOL solution over the area to be cleaned.
Step 2:   Washing down the area using a high-pressure water jet.
After the solution has been  sprayed on the surface and  before the wash down begins, the chemicals penetrate & thoroughly moisten dirt & other grime. During wash down, the RXSOL thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of RXSOL substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of RXSOL in correct dosages is half the job done.


Available Packing Size: 0.00

Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of Foam Agent / Booster  using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of Foam Agent / Booster Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id
theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.