Your shopping cart is empty.
Sulfamic Acid Manufacturer and Supplier
Sulfamic Acid, also known as Amidosulfonic Acid / Sulphamic Acid, is a water-soluble inorganic acid widely used for industrial descaling, acid cleaning, boiler cleaning, heat exchanger cleaning, cooling-system maintenance and metal-surface treatment. Its chemical formula is NH₂SO₃H and its CAS Number is 5329-14-6. It is normally supplied as a white crystalline powder or crystals.
Sulphamic Acid is an odorless, white, crystalline (sand-like) solid. It is used in cleaning metal and ceramics, dye manufacturing, for stabilizing Chlorine in swimming pools, in electroplating, and as a bleaching agent.
Key Features
White crystalline powder
Water soluble
Non-volatile solid acid
Effective mineral-scale remover
Suitable for industrial acid cleaning
Useful against carbonate and other mineral deposits
Can be formulated with corrosion inhibitors for equipment cleaning
Available in industrial and higher-purity grades
Sulphamic acid is used as an acidic cleaning agent, typically for metals and ceramics. It is a replacement for hydrochloric acid for the removal of rust. In households, it is often found as a descaling agent in detergents, cleaners and toilet cleaners for the removal of limescale.
One of the most important applications of Sulfamic Acid is mineral-scale removal. It reacts with carbonate deposits and converts them into soluble sulfamate salts, helping detach and dissolve hard deposits from equipment surfaces.
For industrial cleaning, the required concentration depends on the scale type, deposit thickness, equipment material, temperature and circulation conditions. Published industrial guidance describes sulfamic-acid cleaning solutions in the approximate 5–20% range for certain scale-removal applications, but the actual cleaning procedure should be established for the specific equipment and chemistry.
Sulfamic Acid is a white, crystalline, odorless solid. Harmful or fatal if swallowed. Corrosive to skin and respiratory tract. Can cause permanent damage to eyes.
Sulfamic Acid is used to remove hard-water scale and mineral deposits from boilers and associated equipment. It can dissolve carbonate deposits and produce water-soluble sulfamate salts.
It is widely used for removing calcium, magnesium and other mineral deposits from heat exchangers and similar heat-transfer equipment.
Sulfamic Acid can be used for controlled acid cleaning of cooling towers, evaporative condensers and other water systems where mineral scale has accumulated. Inhibited formulations can provide improved metal protection during cleaning.
The acid is suitable for removing limescale and mineral deposits from condensers, evaporators and related industrial equipment.
Sulfamic Acid solutions are used for removing rust, lime scale, oxides and mineral deposits from selected metal surfaces. Commercial formulations commonly incorporate corrosion inhibitors where required.
It is used as an active acid component in descaling and cleaning formulations for industrial and institutional applications.
Sulfamic Acid is an acid and must be handled using appropriate PPE and chemical-handling procedures. Equipment compatibility should always be checked before cleaning. Corrosion inhibitors may be required for some metals and cleaning conditions. Never assume that a product is safe for every metal, coating, gasket or lining without a compatibility assessment.
Common industrial packaging includes:
25 kg bags
25 kg moisture-resistant bags
25 kg drums
Bulk packaging on request
SULPHAMIC ACID, Sulfamic Acid
Muscat, Salalah, Sohar, Duqm, Rustaq, Barka, Sanaiya, Sur, Seeb, Shinas, Nizwa, Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...
