Primary tabs

Educational Use Only - Order On Request
Mineralite Masonry Cleaner
Get MSDS Get Technical Bulletin Connect on WhatsApp Request Info
Product Code: RXSOL-15-1101-025

Categories

House / HOTEL & CATERING-15

Product Description

RXSOL Mineralite Wash is a fast-acting, inhibited mineral cleaner formulated to remove cement haze, mortar/efflorescence, hard water scale, atmospheric grime, and rust streaks from Mineralite (cementitious) plaster, concrete, brick, and stone. The blend of buffered organic and inorganic acids, plus wetting agents and a corrosion inhibitor, gives rapid soil breakdown with reduced fuming and better substrate safety compared to straight mineral acids.

  • Chromate/nitrite free
  • Low-fume vs plain HCl
  • Designed for professional façade cleaning prior to coating or handover

Product Short Description

Inhibited acid based Masonry Cleaner for Mineralite cementitious exterior plaster

Product Application

Areas of Application of RXSOL Mineralite Masonry Wash

  • External Mineralite or cementitious plaster walls
  • Concrete, blocks, bricks, pavers, and most natural stones*
  • Removal of: cement splashes, laitance, efflorescence, atmospheric dirt, rust stains from rebar bleed or fixtures

*Always perform a small patch test; avoid acid-sensitive stones (e.g., limestone/marble/travertine, polished granites)

Product Dose

Use caution / test first: colored renders, architectural finishes, natural stones

Not recommended: polished limestone/marble; galvanized or bare aluminum/zinc surfaces; glass and anodized finishes (mask beforehand)

Do not use if: Substrate is acid-sensitive (e.g., calcareous stones) or has hairline cracks exposing steel. Fresh plaster is <14 days old (risk of uneven etch/whitening). Temperatures are below 5 °C or above 40 °C; or during rain.

Equipments to use: Low-pressure chemical sprayer (acid-resistant), soft brushes, water supply for flooding rinse, wet-vac or controlled runoff capture if required by site EHS.

Product Note

Key Features of RXSOL Mineralite Masonry Wash

  • Works 3–5× faster than non-acidic cleaners on mineral deposits
  • Inhibited to reduce attack on sound cementitious matrices and nearby metals
  • Buffered to improve control and reduce pungent fumes
  • Wetting/dispersing system reduces streaking and re-deposition

Other Equivalent Brand

Masonry Cleaner, Wall Wash Cleaner, Wall Mineral Cleaner

Product Useful Area

How to use

A. Surface Preparation
  • Pre-wet the façade thoroughly with clean water (saturate pores; avoid dry suction).
  • Mask/meticulously protect metals, glass, painted/varnished surfaces, landscaping, and drains.
 
B. Dilution (by volume)
  • Heavy efflorescence/rust/cement bloom: 1 + 1 (1 part product : 1 parts water)
  • Normal deposits/soiling: 1 + 3 to 1 + 8
  • Light maintenance wash: 1 + 10
  • Always add product to water, not water to product. Use plastic containers.
 
C. Application
  • Apply from bottom-up using low-pressure chemical sprayer or soft acid-resistant brush.
  • Allow 2–5 minutes dwell time. Do not let it dry.
  • Agitate stubborn areas with a soft brush.
  • Rinse copiously from top-down with fresh water until runoff is clear.
  • Repeat if necessary (light second pass is common on heavy crusts).

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...