Your shopping cart is empty.
Fluorescein Liquid Dye RXSOL is a water-based fluorescent tracer dye that meets the minimum biodegradation requirements, removing the need for a substitution warning unlike the standard fluorescein leak tracing dyes. Fluorescein Liquid Dye Rx provides a fluorescent colour which is visible to the naked eye and can be detected subsea by cameras, fluorimeters calibrated to the appropriate excitation / detection wavelength
.
Fluorescein Liquid Dye Rx is lower in toxicity towards operatives and marine organisms than other leak testing dyes, such as Rhodamine and is non-hazardous for supply and transportation.It is compatible with RXSOL Hydrotech 367 RX corrosion inhibitors and oxygen scavengers.
Fluorescein Liquid Dye RXSOL is a commonly used dye for hydro test operations .Fluorescein Liquid Dye RXSOL is a brown liquid which produces a red / pink solution once diluted in water. The solution then produces an orange fluorescence when excited with a blue or green light. For subsea detection of Fluorescein Liquid Dye RXSOL, an optimum excitation wavelength should be used.
Normal dose for application is approximately 100 ppm. Rx Marine can not stipulate an exact dose for Fluorescein Liquid Dye RXSOL . This is due to the strength of colour required being determined by a number of scenarios e.g. style and sensitivity of detection apparatus, sea bed depth and tidal currents. Generally, as a rule of thumb, the dye must not be dosed at below 100ppm for visual detection.
Detection of Fluorescein Liquid Dye RXSOL has been proven using the Leak Detection Systems.
Handling :
No special procedures need to be observed. Normal precautions should be taken and protective clothing,
goggles and PVC/rubber gloves should be worn.
Packing : Available in 25 Litre, Pail, 210 Ltrs drums, 1,000 litre IBC’s capacity.
Fluorescein Liquid Dye RX is a concentrated fluorescent water-soluble dye designed for water tracing, leak detection, flow visualization and industrial water-system identification. When diluted in water, fluorescein produces a highly visible yellow-green to green fluorescent coloration, particularly under suitable UV or blue-light illumination.
The product is useful for maintenance, inspection and troubleshooting applications where visual identification of water movement, leakage or circulation is required.
Product Name: Fluorescein Liquid Dye RX
Product Type: Fluorescent Liquid Tracer Dye
Physical Form: Liquid
Color: Fluorescent yellow-green/green when diluted
Solubility: Water soluble
Brand: RXSOL
Applications: Water tracing, leak detection, flow visualization, industrial and marine maintenance
Highly visible fluorescent tracing effect
Water-soluble liquid formulation
Useful for detecting water movement and leakage
Suitable for flow-path identification
Helps identify difficult-to-locate leaks
Useful for industrial and marine maintenance
Can be observed under suitable UV/blue light
Suitable for controlled water-system testing
Fluorescein Liquid Dye RX can be used as a tracer to help locate suspected leakage in suitable:
Water pipelines
Cooling-water systems
Tanks and reservoirs
Drainage systems
HVAC water circuits
Industrial water systems
Marine water systems
The dye follows the water path, making leakage or unexpected water movement easier to identify.
The fluorescent dye can help maintenance personnel visualize water circulation and identify:
Flow direction
Unexpected flow paths
Dead zones
Circulation problems
Cross-connections
Drainage routes
Fluorescein Liquid Dye RX can be useful for controlled marine maintenance and troubleshooting applications involving:
Seawater systems
Cooling-water circuits
Bilge/drainage investigations
Tank and pipe tracing
Water-flow identification
Leak investigation
The product may be used for troubleshooting and inspection of suitable:
Cooling systems
Process-water circuits
Water tanks
Piping networks
Drainage systems
Industrial equipment
Fluorescein is a fluorescent tracer. After introduction into a suitable water system, the dye travels with the water. Its characteristic yellow-green fluorescence makes the water path easier to observe, particularly when suitable illumination is used.
This makes it useful when conventional visual inspection cannot easily identify the source or route of water movement.
Fluoroscent Greenish orange liquid, Fluprescent Solvent Green Colour Leak Detection
What is Fluorescein Liquid Dye RX?
It is a water-soluble fluorescent liquid dye used primarily as a tracer for water-flow visualization and leak detection.
What color does fluorescein produce?
In suitable aqueous conditions, fluorescein typically produces a bright yellow-green to green fluorescent appearance.
Can it be used for leak detection?
Yes. Fluorescein is commonly used as a tracer to help identify water leakage and unexpected water-flow paths.
Can it be used in marine systems?
It may be used for controlled marine water-flow and leak-tracing applications, subject to system compatibility and applicable environmental requirements.
Is fluorescein visible without UV light?
Depending on concentration and lighting conditions, fluorescein can produce visible coloration. Suitable UV or blue-light illumination can significantly enhance fluorescence.
What is the dosage of Fluorescein Liquid Dye RX?
Dosage depends on the application and water volume. Use the current RXSOL product TDS for the recommended application dosage rather than applying a generic concentration.
Is it suitable for drinking water?
Only use a product specifically approved/certified for drinking-water applications where such approval is required. Industrial tracer-grade material should not automatically be considered potable-water grade.
Muscat, Salalah, Sohar, Duqm, Rustaq, Barka, Sanaiya, Sur, Seeb, Shinas, Nizwa, Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...
