Your shopping cart is empty.
Biocide LXE 100 is an active ingredient preparation of chloromethylisothiazolinone/ methylisothiazolinone to preserve paints, binder dispersions and other technical products. Biocide LXE 100 contains active substances permitted by the FDA for use in their application field, provided that the customary dosage rates are not exceeded. It may be employed in products to be used in close proximity to food, but not in immediate contact.
BIOCIDE LXE 100 is a wet state preservative with a very wide application field such as paints, plasters, adhesives, inks, dispersion and emulsion binders and aqueous technical products in general. It can be used alone or in combination with other active ingredients such as methylisothiazolone or formaldehyde donors.
BIOCIDE LXE 100 is a proven slimicide in paper manufacturing. BIOCIDE LXE 100 contains neither formaldehyde nor cationic or phenolic substances. Therefore, it is particularly suited for use in products not compatible with these substances. BIOCIDE LXE 100 has a broad spectrum of activity. It is effective against gram-positive and gram-negative, aerobic and anaerobic bacteria as well as against mould and yeast.
The number of technical products being preserved with BIOCIDE LXE 100 is increasing steadily and it is not always possible to predict its suitability. The optimum use should be established by a preliminary experiment. In critical cases, predilution with water is often helpful. The optimum dosage rate of BIOCIDE LXE 100 depends upon the degree of contamination and the susceptibility of the product to be preserved. Occasionally, the degree of contamination exhibits seasonal fluctuation, so that a periodical determination of germ counts can assist in choosing the optimum dosage rate. Therefore, the ranges of concentrations listed below should be taken as general guidelines only.
Occasionally, the degree of contamination exhibits seasonal fluctuation, so that a periodical determination of germ counts can assist in choosing the optimum dosage rate. Therefore, the ranges of concentrations listed below should be taken as general guidelines only:
Binders :::::::::::::::::::::::::::::::::0.05 - 0.3%
Other products ::::::::::::::::::::: 0.05 - 0.15%
In the case of special application, please consult with your local sales representative.
Storage, Handling and Disposal
In general, avoid eye and skin contact, wear safety goggles, gloves and protective clothing. In case of eye or skin contact despite precautionary measures, wash immediately and thoroughly with plenty of warm water and obtain medical attention. The legal requirements prevailing in your country, especially on working hygiene and in the avoidance of accidents, must be observed. BIOCIDE LXE 100 should be stored in closed original containers in a cool place, but not below 0°C. At temperatures below 0°C solidification of the product may occur. If the product does freeze, allow it to return to room temperature and it will turn liquid again. Bioactivity is unaffected by freezing and melting.
Kathon XLE
BIOCIDE LXE 100 Manufacturer and supplier in Mumbai, Dubai, Muscat, Nairobi, Kenya, Gandhidham, Surat, Chennai, Visakhapatnam, Sharjah, Ajman, Abudhabi, UAE, Ruwi Barka, Sohar, Kolkata, Paradip, Sudan, Yemen