Your shopping cart is empty.
Activated carbon is useful in drinking water treatment because it acts as an adsorbent , and can effectively remove particles and organics from water. These organics are of great concern in water treatment because they react with many disinfectants, especially chlorine.
The use of granular Activated Carbon in wastewater treatment systems is a proven process for removal of organic compounds. As a tertiary treatment method, carbon adsorption and regeneration have been used to process domestic wastewaters contaminated with industrial wastes of organic origin as well as biologically treated waste waters. Activated Carbon, when contacted with water containing organic material, will remove these compounds selectively by a combination of adsorption of the less polar molecules, filtration of the larger particles, and partial deposition of colloidal material on the exterior surface. The quantity of Activated Carbon required will depend upon the degree of contamination.
Activated Carbon is a very active product with a high proportion of medium and large pores high surface area 1050 meter square per gram. It is recommended for the adsorption of large quantities of high molecular weight substances.
An amorphous from of carbon characterized by high adsorptivity for many gases, vapors, and collodial solids.
Used for water and air purification, solvent recovery, waste treatment, removal of sulfur oxide from stack gases and "clean'' rooms as deodorant, and for air conditioning.
An amorphous from of carbon characterized by high adsorptivity for many gases, vapors, and collodial solids.
Used for water and air purification, solvent recovery, waste treatment, removal of sulfur oxide from stack gases and "clean'' rooms as deodorant, and for air conditioning.
#ActivatedCARBON_UAE
#ActivatedCARBON_Sudan
#ActivatedCARBON_Nairobi
#ActivatedCARBON_MuscatOMAN
#ActivatedCARBON_MumbaiINDIA_Kolkata_Gandhidham_Vizag_Chennai
Activated carbon manufacturer, supplier and exporter. We are manufacturing Granular Activated Carbon with various Iodine Adsorption value (mg. /gm.): 450 IV - 1200 IV
We manufacture and export Activated Carbon to our clients that are formulated using premium quality chemicals and according to the international quality standards. These are used for the reduction of the impurities related to taste, odour and colour inorganic chemicals. Our ranges of products are fully tested by quality analysts to ensure that the defect free range is supplied to our customers. We offer these at cost effective prices.
| GRADE | RX AW-200 | RX AW - 250 | RX AW - 300 | RX AW - 350 | RX AW - 400 | RX AW - 450 |
| MB VALUE mg/gm | 200 (±10) | 250 (±10) | 300 (± 10) | 350 (± 10) | 400 (± 10) | 450 (± 10) |
| pH OF 1% WATER EXTRACT | 6 to 7 | 6 to 7 | 6 to 7 | 6 to 7 | 6 to 7 | 6 to 7 |
| ASH % MAX | 4 | 4 | 4 | 4 | 4 | 4 |
| SOLUBLE ASH % MAX | 1 | 1 | 1 | 1 | 1 | 1 |
| IRON ppm MAX | 250 | 200 | 200 | 200 | 200 | 200 |
| MOISTURE % MAX | 5 to 10 | 5 to 10 | 5 to 10 | 5 to 10 | 5 to 10 | 5 to 10 |
| ACID SOLUBLE % MAX | 2 | 2 | 2 | 2 | 2 | 2 |
| WATER SOLUBLE % | 1 | 1 | 1 | 1 | 1 | 1 |
| L.O.D % MAX | 7 to 10 | 7 to 10 | 7 to 10 | 7 to 10 | 5 to 10 | 5 to 10 |
| CHLORIDES ppm | USP | USP | USP | USP | USP | USP |
| % KMnO4 ADSORPTION | 55 | 65 | 75 | 85 | 90 | 95 |
| IODINE VALUE mg/gm | 800 (± 50) | 850 (± 50) | 1000(± 50) | 1100(±50) | 1150 | 1200 |
| METHANOL TEST | No Turbidity | No Turbidity | Passes | Passes | Passes | Passes |
| PARTICLE SIZE | 85 % Passing through 250 mesh size | 85 % Passing through 250 mesh size | 85 % Passing through 250 mesh size | 85 % Passing through 250 mesh size | 85 % Passing through 250 mesh size | 85 % Passing through 250 mesh size |
TYPES OF ACTIVATED CARBON
POWDERED ACTIVATED CARBON :-
GRANULAR ACTIVATED CARBON :–
ACF/DMF FILTER Media, Norit GAC 830 Activated Carbon
High surface area carbon agent. Activated Carbon, Manufacturer, Suppliers and Exporter From India, And keeping ready stock at FUJAIRAH.
GRANULAR activated carbon are versatile adsorbents with wide range of applications. They are most effective adsorbents in treating drinking water and industrial wastewater
Decolorisation The amount of colorants that can be removed from a solution by activated carbon depends on factors such as contact time, carbon dosage, temperature, concentration or viscosity of the solution and the intrinsic features of the carbon itself. A study was conducted to evaluate the effect of the type of activated carbon on the percent color removed from a melt sugar liquor in sugar mill. The commercial carbon CCOAL had a capacity to remove 18% color. while Granular Carbon Tech Grade had the best decolourising power, which effectively removed 29.79% color
ACTIVATED CARBON It is known that removal of impurities from liquids or gases by Activated Carbon is by adsorption. But only a thin layer if molecules is enough to neutralize the residual attraction of the outer carbon atoms, which then cannot be adsorb any further molecules and carbon is said to be exhausted. It is however possible to make carbon porous. In this way many countless are created and internal surface area is increased. Many more carbon atoms are then exposed to the surroundings resulted in more molecules from surroundings can be attracted. The carbon is more active and hence called “Activated Carbon”. One gram of ground carbon has an external surface area of 2 to 4 square meters, whereas when carbon has been activated this one gram of carbon may acquire an internal surface area of more one thousand square meters.
PRODUCTION OF ACTIVATED CARBON Activated carbon can be produced from many raw materials i.e. Soft wood, Coconut shell, Peat lignite (Both mineral & coal). The raw material must be relatively low cost and source of raw material should be closed to the factory location to minimize the transport cost. We are using Soft wood & Coconut shell charcoal as raw material in our factory.
PROCESS OF MANUFACTURING:
1. STEAM ACTIVATED PROCESS: The majority of Activated Carbon used through out the world is produced by two stage process. Firstly the material is carbonized and cock is produced. The pores of produced cock are too small; hence, the next is a process of enlarging the pore structure so that an accessible internal surface is created. This is achieved by semi product with steam at temperature between 900o C to 1200o C. At this temperature rate determination factor is the chemical reaction between steam and carbon. This reaction takes place at the internal surface of the carbon removing carbon from the pore walls and there by enlarging them. Opening up the pore structure is costly as the yield decreases and extra heat is required. e.g. In the purification of water for the adsorption of small molecules from solution. This carbon is cheaper compare to sugar decolorizing carbon where large molecules are to be removed. Thus, steam activation process allows the pore size to be altered and finally carbon can be made to suit different purpose.
PRODUCT The product range of our company can be broadly divided in two categories that is -Powder Carbon & Granular Carbon. Activated carbons are produced from selected best quality of wood charcoal to give a high quality product.
POWDER CARBON:
a. Oil Grade Carbons: We have wide range of different grade of Activated carbon for bleaching of edible oils like G.N., Solvent extracted G.N. Oil, Cotton seed Oil, Rapeseed Oil, Soya bean Oil, Palm Oil, Rice bran Oil, Maize Oil, etc. as well as non edible oil like castor oil & mineral oil.
b. Carbon for Purification Of Sugar & Related Products: Activated Carbon for purification of sugar syrups, refining of glucose, dextrose & in manufacture of sugar cubs.
c. Carbon for Purification of Chemicals: For purification of chemicals Dye Intermediates, Electroplating bath solution, plasticizers EDTA, And Acetic acid etc.
How Carbon Filters Work ?