Coal Tar Cleaner/Remover is chemicaly emulsifying cleaning agent which is effectively removaes coal tar, bitumen, crude petroleum benzine, Black oil etc. Also helps to emulsify bitumen asphalt to make emulsion.

Sodium Hypo Chlorite

Electrolysis Process ( Pure & Concentrated )
This is an improved version of this method, known as the Hooker process, In the process, sodium hypochlorite (NaClO) formed when chlorine is passed into cold and dilute sodium salt solution. It is prepared with minimal separation between the anode and the cathode .The solution must be kept below 40 °C (by cooling coils) to prevent the undesired formation of sodium chlorate and to keep chlorine concentration up to 15%.

Chloro Alkali process ( Chlorine value is less )

E. S. Smith patented a method of sodium hypochlorite production involving electrolysis of brine to produce sodium hydroxide and chlorine gas, which then mixed to form sodium hypochlorite. This is known as the chloralkali process. Both electric power and brine solution were in cheap supply at the time, and various enterprising marketers took advantage of the situation to satisfy the market's demand for sodium hypochlorite. Bottled solutions of sodium hypochlorite were sold under numerous trade names.

Bye Products ::: NEVER use this product as it contains hazardous mixture.

This is bye products of HEAVY / Metal industries. During treatment of main products, huge quantities of SOD. HYPO Chlorite produce, with mixture of many unwanted toxic impurities . This is completely waste of the plant , but sold by traders to satisfy market demands.

Safety

Hydrochloric acid in high concentrations forms acidic mists. Both the mist and the solution have a corrosive effect on human tissue, with the potential to damage respiratory organs, eyes, skin, and intestines. Upon mixing Muriatic acid with common oxidizing chemicals, such as bleach (NaClO) or permanganate (KMnO₄), the toxic gas chlorine is produced. To minimize the risks while working with hydrochloric acid, appropriate precautions should be taken, including wearing rubber or PVC gloves, protective eye goggles, and chemical-resistant clothing.

Refer MSDS of Aqua clean break before its uses.
SPOT cleaning : Spray 20% concentration directly on SPOTED area and give 30 - 45 Minutes to work, Then finally rinse the surface area with WATER. 

Keep Container tightly closed. And before using of this product refer our MSDS to avoid any critical problem.

Remember, not to use a stronger mixture than necessary for the problem to be solved, as this may affect the lifetime of the paint.

Note: Depends up on the type of hold paint, the last cargo and the requirements of the next cargo and/or the vessel’s main trade,