Primary tabs

Electrosol NF Motor Cleaner
Get MSDS Get Technical Bulletin Connect on WhatsApp
Product Code: RXSOL-16-1076-020

Categories

Deck cabin galley Maintenance-25

Product Description

Excellent Cleaner for Electric Parts - Electrosol NON  FLAMMABLE

Electrical Non Flammable Contact Cleaner  is a specialized non-flammable cleaning solvent specialized to clean Electrical Equipment. A well balanced blend of non-chlorinated degresol Having super Degreasing power  with surfactants which eliminates  Quick evaporation rate and resulting  for Cleaningand Degreasing  of electrical equipment. It provides immediate and efficient removal with a high evaporation rate.

Product Short Description

Super Degreasing power with surfactants which eliminate Quick evaporation rate and result in cleaning and Degreasing

Product Application

RXSOL-16-1076-025 must be used in open or  sufficiently ventilated areas. RXSOL-16-1076-025 should always be used concentrate (without mixing with other solvent.) For best results apply with either by brush, swab, or as  a fine spray using suitable hand held spray  equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1076-025 . Never use RXSOL-16-1076-025  on a running generator or motor.

RXSOL-16-1076-025 can be used to clean virtually all electrical equipment  & components although  is it possible it may affect some types of rubber &  plastic .  Either  remove  rubber  &  plastic  parts  from  component  or test on small area for any reaction before cleaning.

Product Dose

DIP Cleaning Immersion Method is best for Small parts, While SPRAYING method is BEST cleaning method for Equipments and Parts Cleaning. 

After Application and Cleaning of equipment, Wipe thorugh cloth or BLOWN the air for fiew minutes till DRY.

Product Note

Characteristics :-

  • High dissolving and penetration action.
  • Excellent degreasing and emulsification power .
  • Safe on applied electrical insulation.
  • Non-corrosive. it is safe to use on painted or varnished metal surfaces.
  • Without chlorinated solvents.
  • To be used as an alternative to conventional electric cleaners              

Industrial area

#Electrosol_ElectricalCONTACTcleaner
 

Either remove rubber and plastic parts from component or test on small area for any reaction before cleaning.
After cleaning motors or generators insulation resistance to ground should be tested to check that it is within its specified limits. Sprayers: a range of spray equipment is available for use with Electrosolv-E and other solvents.
 
 
Directions for use
RXSOL Electrosol must only be used in sufficient ventilated areas. RXSOL Electrosol should always be used undiluted. It can be applied by brush, swab or as a fine spray using suitable hand held spray equipment.
 
NOTE: Never open flame when using fine spray.
 
Small components be cleaned y brief immersion in a bath of RXSOL Electrosol. The most suitable way of applying RXSOL Electrosol is by using hand spray or syphon spray gun. Once the deposits of dirt and grease have been flushed away with RXSOL Electrosol the remaining solvent may be evaporated by using clean compressed air at low pressure and high volume.

Remarks

Excellent Electrical / Electronic Panel cleaner and degreasing chemicals to removes residues of oils, greases and machine coolant from machined parts, castings, panels and electrical/electronic components
 
 
 
RXSOL-16-1076-020 Electrosol NF Motor Cleaner Designed to provide a versatile degreasing solution for all manufacturing, maintenance, inspection and surface preparation needs
 
RXSOL-16-1076-020 can be used to clean virtually all electrical equipment  & components although  is it possible it may affect some types of rubber &  plastic .  Either  remove  rubber  &  plastic  parts  from  component  or test on small area for any reaction before cleaning.

Other Equivalent Brand

Arrow Lotoxane Non aromatic solvent, Electric Motor Cleaner, Arma cleaner, Drew Electric 2000, CRC Lectra Clean, Generator Cleaner 25 Ltr

Product Tag Identification

RXSOL-16-1076-020 is also used in  sensitive aerospace applications

Product Useful Area

Never use ELECTROSOL on a WORKING AND Running Motor / Generator area.
 
USE Electrosol concentrated form only, Never Dilute before application.

Useful to clean all electrical parts and equipment components. Avoid to use on  rubber and plastic.

Use in Well Ventillated AREA.

Never USE flame, during usage of ELECTROSOL Electrical Contact Cleaner.
 

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...