Effective controller of MICRO BIOCIDE and BACTERIA from condensor WATER system. being effective against most kinds of bacteriaa, algae and fungi. It is a particularly useful product for air-wash systems and is compatible with all commonly used antifoulants and corrosion inhibitors.
Microbiocide based on Organo sulphur compound, for use in open recircurculating systems.
* Highly effective
* Broad spectrum activity
* Economical and easy to use
* Compatible with other treatments.
Effective controller of MICRO BIOCIDE and BACTERIA from condensor WATER system.
Biocide Antimicrobial for Cooling Water RXSOL-43-4009-250 is a high performance non-oxidising micro-biocide that uses the latest chemical technologies for the rapid and effective treatment of cooling water systems. Biocide Antimicrobial for Cooling Water RXSOL-43-4009-250 is a rapid acting micro-biocide developed for use in cooling water systems and is effective against Legionella bacteria, SRB’s, algi and fungi. Biocide Antimicrobial for Cooling Water RXSOL-43-4009-250 will also penetrate and disperse biofilm slimes making it an ideal cooling water treatment. Biocide Antimicrobial for Cooling Water RXSOL-43-4009-250 has an excellent environmental profile and is readily biodegradable.
How to control Algae growth in cooling towers, air conditioning cooling systems, and evaporative condensers?
RXSOL-40-4009-210 MICRO BIOCIDE Cooling Water RXSOL is an organic chlorine releasing microbiocide which will effectively control the growth of algal slimes on cooling Water distribution decks, fill, and basins.
This product is recommended for use in industrial process cooling towers, air conditioning cooling systems, and evaporative condensers. It is particularly recommended for use in systems where algae growth is especially difficult to control.
Biocide for Cooling Water
Product Benefits
Biocide Antimicrobial for Cooling Water RXSOL-43-4009-250 should be dosed periodically at a rate of 75 - 150 ppm of the total system volume. In a badly fouled system an initial dosage rate of up to 250m1/m3 may be required which can be reduced once control is gained.In order to comply with Health & Safety recommendations Clog Controller Biocide Biocide Antimicrobial for Cooling Water RXSOL-43-4009-250 should be alternated with another non-oxidising or oxidizing biocide. It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
Biocide Antimicrobial for Cooling Water Systems packing manufacturer and supplier in Gangavaram Visakhapatnam, Chennai Ennore, Haldia Paradip Kolkata Buzbuz, Fujairah Abudhabi, Ajman, Sharjah, Dubai UAE Middle East, Mumbai, Hazira, Surat, Gandhidham Mundra, Sohar, Barka, Muscat Oman, Nairobi Kenya Africa, Sudan Yemen, Canada