Your shopping cart is empty.
Product Code: RXSOL-25-1747-025
Specialized Descaling Chemical for Marine Water Systems, Seawater Pipelines, Heat Exchangers and Industrial Equipment
Marine water systems frequently experience scaling due to the presence of dissolved calcium, magnesium and other mineral salts in seawater and freshwater. Over time, these deposits accumulate on internal surfaces, reducing water flow, restricting heat transfer and affecting equipment performance.
RXSOL Marine Water Scale Remover is intended to dissolve and loosen stubborn mineral deposits, helping restore system cleanliness, improve water circulation and support efficient operation.
The product is suitable for controlled chemical descaling of compatible seawater cooling systems, heat exchangers, marine pipelines, pumps, condensers and associated water-handling equipment.
LIME Marine is a safe, biodegradable marine descaler developed to dissolve problematic fouling mediums including calcium, rust, mussels, barnacles, tiger shells and other scale formed mineral deposits that hinder the performance of vital water systems. RXLYME Marine is formulated to meet the demands of today's water systems. LIME Marine is non-corrosive, non-hazardous, and biodegradable . With the reduction of labour and operating costs, downtime, and no installation costs, accompanied with the heavy duty cleaning power, LIME Marine keeps your vessel at sea generating revenue.
Effective removal of calcium carbonate and common mineral scale deposits.
Helps dissolve hard water scale and seawater-related encrustations.
Suitable for marine and industrial water system maintenance.
Helps restore water flow through scaled pipelines and equipment.
Improves heat-transfer performance where mineral deposits cause fouling.
Reduces the need for extensive mechanical descaling.
Suitable for controlled circulation and immersion cleaning.
Useful for preventive and corrective maintenance programmes.
Can assist in cleaning difficult-to-access internal passages.
Supports maintenance of marine cooling and water circulation systems.
Marine Seawater Cooling Systems
Used for removing mineral deposits from compatible seawater cooling circuits, pipelines and cooling equipment.
Heat Exchangers
Helps dissolve scale deposits on compatible heat-transfer surfaces, improving thermal performance where fouling has reduced efficiency.
Marine Condensers
Suitable for controlled descaling of compatible condenser tubes and associated water passages.
Seawater Pipelines
Assists in removing mineral encrustations and scale deposits that restrict internal flow.
Pumps and Valves
Can be used to clean compatible dismantled components affected by hard water scale and mineral accumulation.
Freshwater Generators and Evaporators
Suitable for selected descaling applications, subject to equipment manufacturer recommendations and material compatibility.
Industrial Water Systems
Used in compatible cooling circuits, process water pipelines and industrial equipment affected by mineral scale.
Read the latest product Safety Data Sheet before use.
Wear suitable chemical-resistant gloves, goggles and protective clothing.
Avoid skin and eye contact.
Provide adequate ventilation.
Do not mix with chlorine-containing chemicals, hypochlorite or other cleaning agents.
Use compatible pumps, hoses, tanks and dosing equipment.
Monitor the cleaning process to avoid excessive metal exposure.
Collect and dispose of spent cleaning solutions in accordance with applicable regulations.
If the product contains acid, additional precautions may be required for corrosivity, hydrogen generation with reactive metals and carbon dioxide release during carbonate scale dissolution.
Store in the original tightly closed container in a cool, dry, well-ventilated area.
Protect from direct sunlight, excessive heat and incompatible chemicals.
Keep containers properly labelled and use suitable secondary containment.
Product Name: Marine Water Scale Remover Product Code: RXSOL-25-1747-025 Packing Size: 25 Litres
Other bulk packing arrangements may be considered subject to availability.
This safe and simple solution effectively dissolves rock-like scale deposits that contaminate your water-cooled marine equipment. LIME Marine is used at ambient temperature and then circulated to bring the solution in contact with the accumulated minerals. The reaction results in a slight foaming or bubbling action, indicating the deposits are actually dissolving into solution, and then simply water flush away! These scale deposits, along with zebra mussels and tiger shells, damage your equipment and reduce your water system performance. Historically, these problems have been addressed via harsh acids, mechanical methods, ion exchange, polyphosphates, permanent magnets and electronic conditioning. If your vessel is heat exchanger cooled, keel cooled, or radiator cooled, try LIME Marine and ride the waves with maintenance superiority.
Recommended for compatible heat exchangers, seawater pipelines, condensers and closed water circuits.
Shut down and isolate the equipment to be cleaned.
Drain the system and remove loose debris where practical.
Inspect the system materials and confirm chemical compatibility.
Prepare the descaling solution at the concentration specified in the product TDS.
Circulate the solution through the scaled system using a suitable chemical-resistant pump.
Monitor scale dissolution, solution condition and relevant process parameters.
Continue circulation until the required cleaning endpoint is achieved.
Drain and collect the spent cleaning solution.
Rinse thoroughly with clean water until the required post-cleaning conditions are achieved.
Neutralize or passivate the system where required by the equipment maintenance procedure.
Important: If the formulation is acid-based, monitor gas evolution and avoid operating the cleaning circuit as a sealed, unvented system.
Suitable for compatible dismantled components.
Place the components in a chemically resistant cleaning tank.
Prepare the descaling solution according to the approved TDS.
Immerse the components in the solution.
Allow sufficient contact time for scale dissolution.
Inspect periodically and remove loosened deposits where necessary.
Remove the components and rinse thoroughly with clean water.
Dry and protect the cleaned components as required.
For accessible compatible surfaces, apply the product using an approved chemical-resistant applicator.
Allow controlled contact with the scale deposit, then rinse thoroughly. Avoid allowing concentrated chemical to remain on sensitive surfaces.
LIME Marine should be used as directed and at any temperature within the operating limits between 0°F / -18°C and 180°F / 82°C. If the solution does freeze, slush or thicken at the lower operating temperatures, and then thaws, there will be no performance reducing results. Please consult the manufacturer when temperatures above 180°F are encountered.
RXLYME Marine should be applied at ambient temperatures with no heating required. The solution is exothermic, but does not develop a substantial increase in temperature while dissolving water scale, rust, mussels, barnacles, zebra mussels, tiger shells and other water formed deposits.
|
Deposit Type |
Expected Cleaning Action |
|---|---|
|
Calcium Carbonate Scale |
Dissolution with a suitable descaling formulation |
|
Magnesium Carbonate Deposits |
Chemical dissolution |
|
Hard Water Scale |
Removal of common carbonate-based deposits |
|
Seawater Mineral Encrustation |
Loosening and dissolution of susceptible mineral deposits |
|
Mineral Fouling in Heat Exchangers |
Helps restore clean heat-transfer surfaces |
|
Salt Deposits |
Removal where soluble or chemically susceptible |
|
Calcium Sulphate Scale |
Effectiveness depends on formulation and deposit structure |
|
Silica-Based Scale |
May require a specialized cleaning chemistry |
Note: Not all mineral scales respond equally to the same descaling chemical. Silica-rich, sulphate-rich and mixed biological/mineral deposits may require different treatment methods.
Advantage :
This allows the solution to be water flushed down normal plant sewers. Check with local ordinances and regulations in your area prior to disposal.
Our company is holding no-1 RXSOL Brand Descaling Boilers Chemical as a Descaling Chemicals Manufacturers, Descaling Chemicals Wholesale Suppliers, Descaling Chemical suppliers, dealers, distributors India and Descaling Chemical exporters for UAE.
We have supply network in Rabale, Navi Mumbai, Mumbai, Surat, Kandla, Gandhidham, Mundra, Sikka, Chennai, Ennore, Vizag, Visakhapatnam, Kakinada, Kolkata, haldia, Paradip, Fujairah, Dubai, Middle East
Q1. What is RXSOL Marine Water Scale Remover used for?
It is intended for removing mineral scale and seawater-related deposits from compatible marine cooling systems, pipelines, heat exchangers and industrial water equipment.
Q2. Can it remove calcium carbonate scale?
Yes, calcium carbonate is a principal target for suitable chemical descaling formulations.
Q3. Can Marine Water Scale Remover be used in seawater heat exchangers?
It may be suitable, provided the chemical formulation is compatible with the heat exchanger tubes, gaskets and other wetted materials.
Q4. Is the product safe for copper-nickel and aluminium brass tubes?
Compatibility cannot be guaranteed without knowing the exact descaling chemistry and corrosion-inhibitor package. These alloys require specific evaluation.
Q5. Can the product be circulated through pipelines?
Yes, controlled circulation is a common descaling method, provided the system is compatible and the cleaning procedure follows the approved TDS.
Q6. Does the product remove rust and oil deposits?
Its primary purpose is mineral scale removal. Rust, heavy oil, biological fouling and silica-rich deposits may require separate or additional cleaning treatments.
#LIME_Marine_Scale_Remover
#LimeScale_remover
LIME Marine does not corrode, erode, attack, oxidize or have other deleterious affects on virtually any metal or materials found in marine water systems such as: BRASS, IRON, LEATHER, CERAMIC ,WOOD, FIBER, PLASTICS FIBERGLASS, COPPER, STEEL, TITANIUM ,COPPER NICKEL ,RUBBER, GLASS, GELCOATS PAINTED SURFACES.
LIME Marine is an electrolyte, as are most cleaning agents. An electrolyte is any liquid that will transfer small electrical currents. Examples: salt water, vinegar, Coca-Cola. An electrolyte may cause plating in some types of equipment. This means a transfer of small amounts of one metal onto another metal according to the galvanic corrosion chart. In some instances, a thin coating of copper may be plated onto a steel drum while circulating an electrolyte such as RXLYME Marine. The only time plating occurs is when two dissimilar metals are in an electrolyte solution.
It is recommended, but not mandatory, that the LIME Marine solution be thoroughly mixed before using. Some settling of a dark precipitate may occur, resulting in an amber colored liquid, but has no negative affects upon the performance of the solution.
Marine and shipping industry
Ship repair and dry-docking
Offshore support vessels
Marine engine cooling systems
Seawater cooling installations
Industrial heat exchangers
Power generation facilities
Desalination plants
Industrial water treatment
Mechanical maintenance contractors
Rydlyme Marine, Desacling agent for Marine Diesel Engine Fresh water cooler
LIME Marine has the ability to dissolve approximately 1 Kg of calcium carbonate scale per 3.75 Ltrs in concentrated form. If the LIME Marine is diluted, it will still dissolve 1 Kg of carbonate scale per 3.75 Ltrs, but will require additional circulating time.
The concentrated solution can be held safely in the open hand without deleterious affects. It will however cause a stinging sensation when contact is made on an open wound or cut. If this occurs, simply rinse thoroughly with soap and water.
For the most effective descaling programme, identify the deposit composition and equipment metallurgy before selecting the chemical concentration and cleaning procedure.
A complete marine water system cleaning programme may include preliminary flushing, chemical descaling, thorough rinsing, inspection and suitable post-cleaning corrosion protection.
RXSOL CHEMO PHARMA INTERNATIONAL
Product: Marine Water Scale Remover Product Code: RXSOL-25-1747-025 Category: Marine Maintenance Chemicals / Descaling Chemicals
Website: www.rxmarine.com
Muscat, Salalah, Sohar, Duqm, Rustaq, Barka, Sanaiya, Sur, Seeb, Shinas, Nizwa, Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...
