• Unique chemical formulation for cleaning of  graffiti from smooth and rough surfaces
• Non- toxic.
• Extends time between cleans.
• Safe to handle.
• Effective removal of Heavy DEPOSITS.
• Can be applied by all normal methods.
• Formulated to be very cost effective.
• Does not contain chlorinated hydrocarbons.
• Can be used on all metals & most painted surfaces.
• Environmentally friendly.
• Non-Corrosive.
• 100% Active.
• Dries Completely.
• Does not require special feeding equipment for safe application.
• Cleans and flushes painting instrument like spray guns, paint lines, mixing tanks, and general purpose paint jobs
• Removes and cleans wax for surface preparation for paint, glue, and assembly applications
• very effective to remove   sticky mess of LABEL ( After peeling off the Label ) Also very usefull for removal of vinyl graphics from boats, signs, trucks, and glass
• Cleans and degreases a variety of parts, tools, and equipment
• Removes soot, grease, oil, grime, and diesel fuel
• Handles tough automotive and transportation cleaning jobs
• Cleans toner, copier equipment, and machinery including printing presses
• Clean heavy duty oily and tar deposits
• Flushes and cleans polyesters, vinyl ester, and epoxy lines
• Removes polyurethanes, varnishes, enamels, and UV curable coatings
• Cleans and prepares material surfaces such as metals

Other key areas of application

• Marine & Shipping: Removal of oily residues, grease, and fuel stains from decks, engine rooms, and storage tanks.
• Automotive & Transport: Cleaning of engines, machine parts, and greasy components without damaging painted or metallic surfaces.
• Oil & Gas Industry: Effective dispersant for crude oil, lubricants, and heavy hydrocarbon residues in terminals and refineries.
• Manufacturing & Engineering: Degreasing of tools, molds, PU equipment, and machinery during maintenance.
• Aviation & Aerospace: Safe cleaning of oily deposits and residues from metallic and composite surfaces.

Vegetable and Animal Oils (Cleaning Procedure)

 1. Butterworth the tank with seawater or freshwater with a temperature 20°C. above the melting point of the product to be cleaned. After sufficient pre-cleaning of at least 1.5 hours the temperature can be increased. Drying and Semi-drying ProductsThese are oxidising products and through reaction with oxygen they will dry and harden. Tank cleaning should be executed as soon as possible after discharge. High temperatures (e.g. cleaning or steaming) and heated cargoes in adjacent tanks should be avoided.
 2. Butterworth the tank with cold to warm seawater or freshwater.If the product has a higher melting point Butterworth the tank with seawater or freshwater with a temperature maximum 10°C above the melting point of the product. After sufficient pre-cleaning of at least 1.5 - 2 hours the temperature can be increased. Fatty Acids or  vegetable/animal oils with high free fatty acid contentsee the cleaning suggestion of Fatty Acids.
 3. If seawater was used in step 1 it is of utmost importance to flush/rinse the tank with freshwater before cleaning as per step 3 is continued.   
 4. (Final cleaning)Prepare the following solution (A) in freshwater (see table):
 

• Solution A(emulsification) 0. 4 % RXSOL-20-2046-210 Butterworth the tank with the prepared solution for 1, 5-2, 0 hours by recirculation. The necessary temperature can be achieved / maintained by means of heating coils, cargo heat exchanger or Butterworth heater. Depending on the amount of product residues the solution can be used for 1 to 4 tanks.On some vegetable/animal oils it is recommended to saponify additionally the product residues (see
  table): Therefore prepare one of the following solutions (B or C) in
  freshwater (see table):
   
• Solution B 0.4 % RXSOL-20-2046-210 plus 2.5% Potassium Hydroxide (KOH) or Sodium Hydroxide (NaOH)
   
• Solution C 0.4 % RXSOL-20-2046-210 plus 2 - 5% RXSOL AL 2005

 5. continued Butterworth the tank with the prepared solution for 1, 5-2, 0 hours by recirculation. The necessary temperature can be achieved /maintained by means of heating coil (service tank) cargo heat  exchanger or Butterworth heater.If RXSOL-20-2046-210 is used the  cleaning temperature should be 60-70°C If Sodium or Potassium Hydroxide is used the cleaning temperature should be 60.C.If RXSOL-20-2046-210 Marine is used the cleaning temperature can be 70-80°C. Depending on the amount of product residues the solution can be used for 1 to 3 tanks.
 6. Butterworth the tank 1 hour with hot seawater
 7. Rinse the tank with fresh water
 8. Inspect the tank; if white residues or a white film is present (calcium/magnesium soaps or carbonate) Butterworth the tank with one the following solution: 3-5% phosphoric acid and 0.4% RXSOL-20-2046-210 (stainless steel only); or 3-5% nitric acid and 0.4% RXSOL-20-2046-210 (stainless steel only); or 5-10% citric acid and 0,4% RXSOL-20-2046-210 (also suitable for Epoxy Coatings) or 2% RXSOL-16-1011-025 Marine and 0,4% RXSOL-20-2046-210 (also suitable for Epoxy Coatings) The cleaning temperature should be moderate (50°C.) Use heating coils not the Butterworth heater.
 9. Flush the tank with fresh water
10.Ventilate, mop and dry the cargo tank.

Note: for vegetable oils which can be cleaned only by the RXSOL-20-2046-210 (Solution A) the final cleaning can be carried out by recirculation or byinjection (see method 3).

Keep coantiner tightly closed and away from direct Heat and sunlight.

Procedure for efficient tank gas odor removal

Liquid Circulation Method

• Drain free hydrocarbons from tank or vessel.
• Fill system with water.
• Add CC-Eliminator Plus™ at recommended dosage.
• Circulate solution for 4-24 hours.
• Monitor benzene and H₂S levels.
• Drain and rinse with fresh water.

• Prepare 1-2% solution.
• Spray or fog inside vessel.
• Maintain closed environment for reaction.
• Ventilate and monitor gas levels.

How BioGuard Tank SLOP Biocide works to kill microbial growth in TANKS

• RXSOL Biocide 1: Fast-acting electrophilic biocide that disrupts microbial enzyme systems, leading to rapid cell death.
• RXSOL Biocide 2: Inhibits microbial growth by reacting with and inactivating essential proteins and enzymes.
• The combination ensures shock-kill capability plus long-term residual activity, preventing regrowth.

This is a synergistic blend of RXSOL Biocide 1 and 2