Primary tabs




Product Code ::RXSOL-16-1011-020
Categories: Air Lines-36
Product Short Description: Rust cleaner Superior formulaheavy duty and highly Concentrated liquid blend of surfactant & organic compound containing rust penetrating agent, solubilizer and inhibited phosphoric acid.
Product Description:

Metal Rust Bright MRB is heavy duty and highly Concentrated liquid blend of surfactant & organic compound containing rust penetrating agent, solubilizer and inhibited phosphoric acid. Metal Rust Bright MRB is a useful product in maintenance and cleaning sector. In the marine shipping industry, Metal Rust Bright MRB is used as a rust remover. Largest seller and supplier of Metal Rust Bright MRB in INDIA and Middle East.

Product Application:

For polishing almost all metals, such as brass, copper, nickel, chrome, stainless steel, aluminium and even for machinery and golf clubs.
 

MARINE - Rust Stain cleaner Metal Rust Bright

RXSOL-16-1011-025 ( Metals Rust Clean Bright ) can be used as a spot cleaner after cleaning fats and fatty acids , can be used on painted surface

A superior heavy duty and highly Concentrated liquid blend of surfactant & organic compound containing rust penetrating agent, solubilizer  and inhibited phosphoric acid with ionic and non ionic emulsifier.

For polishing almost all metals, such as brass, copper, nickel, chrome, stainless steel, aluminium and even for machinery and golf clubs.

Product Dose:

Field:- specially designed for removal of rust from any steel surface area and rust stain from Brass , Copper, S.S wood, ceramic and aluminium surfaces, painted or not . And act as surface brightner.

Procedure for Use:-RXSOL-16-1011-020 is highly concentrate

Dilute in water (always use plastic jar and RXSOL-16-1011-020 should be added to water never add water to RXSOL-16-1011-020.)

Surface should be sound clean and free from oil, grease, dirt etc.

Diluted materials apply on rusted area for 15 to 20 minutes then wash off with water repeat if necessary. (For stubborn rusted stains.)

Note:- For steel surfaces; remove oil, grease and old paint. Wet down entire surface with neat Metal Bright- Rx and allow to dry. Second wash may be necessary. Surface should have a grey/white appearance when the Metal Bright- Rx is dry. Steel surfaces will have a resistance to rust and will render a good base for paint. For removal of rust stains on painted surfaces and wood, Metal Bright Rx should be applied at full concentration for heavy stains, or diluted to 20-50% for light stains. Allow to soak for 15 to 30 minutes and wash off with water. A second application may be necessary to remove the stubborn stains.

Spraying Direction: – Using an empty / clean 210 liter drum, fill with 190 liter of fresh water and add 20 liters of Metal Rust Bright This makes a 10% solution, which can be sprayed onto areas in coated tanks where rust stains are showing and over actual rusted areas. Once spraying is completed, wait 20-30 minutes and fresh water rinse with lots of water, if possible use butterworth machines for a more efficient result. This method can be used in stainless tanks to “freshen up” the look of the stainless materials. Make sure to rinse the tank very well, as residual detergent within the Metal Rust Bright will show up in a Wall Wash.

Injection– Not suitable.

Re-circulation: – When hand spraying is inadequate (too much area to cover), prepare a 2% - 5% solution in the tank using fresh water, heat solution to 50o C, then circulate the solution through Butterworth machines for 3 x 45 minutes drops minimum. When using fixed machine recirculate for a minimum of 3 cycles. Rinse out the tank using hot seawater 85o C for 2 hours making sure that there is no form remaining in the water at the pumpstack drain cock. After the hot wash, the tank must be rinsed with fresh water and dried.

* If the mixture is allowed to overheat, it will soften epoxy / phenolic coating. *

Use a strainer at the pumpstack when circulating any solution. Tank Lining – Stainless / Epoxy, Phenolic

Product Note:

Characteristics:-

• Non-flammable.
• Prevents further rusting.
• Economical, cost effective.
• Surface brightening
• Protects and maintains from corrosion
• Acts as rust proofing agent before the application of paints or coatings.
• It doesn’t affect rubber and plastic compounds

Note:- When cleaning aluminium, brass & copper flush with water upon completion of cleaning

Product Technical Specification:
Industrial area:
Remarks:

Specially designed for removal of rust from any steel surface area and rust stain from Brass, Copper, S.S wood, ceramic and aluminium surfaces, painted or not. And act as surface brightner.

When cleaning aluminium, brass & copper flush with water upon completion of cleaning immediately
Warning : In case of contact with skin, wash immediately with plenty of water. Use chemical resistance PVC gloves for skin contact and also use face mask for eye and face protection.

Read the Material Safety Data Sheet before using this products.

Other Equivalent Brand:
Product Tag Identification:

Metal Rust Clean Bright at the low pH end effectively dissolves rust faster even more readily than the diluted one. In marine shipping industry, Metals Clean Bright is used as a rust remover. And For severely corroded and rusted surfaces and pickling of welding repairs, use 50% solution to neat. while For removal of rust stains on ceramic tiles, enamels, porcelain, glass etc., use a solution of 20–50%, depending on stains and soiling. Rinse off with water after 20–40 minutes.

Metals Rust Clean Bright also some times works as removal of light deposited cement stains and lime, apply a 50% solution, and high pressure wash after 30–40 minutes, and while if cement deposition are hard and more solidified then use our specialized product for cement removers RXSOL-22-2202-025.
Product Useful Area:

Metals Rust Clean Bright is Cargo hold and Tank cleaning chemicals. Which is also useful products for Deck and maintenance cleaning and rust removing. 

Before application of Metals Rust Clean Bright, we have to understand its cleaning principal...
 
In general terms and thumb rule for Metals Rust Clean Bright is MORE RUST required more Metals Rust Clean Bright. Chemically Rust { iron oxide (FeO) } is soluble in pH values below 4.0, . Thus, the oxide (oxygen) dissolves as it is formed instead of depositing on the metal's surface. So it is clear more rust required more Metals Rust Clean Bright to get dissolve. In practical if the area is fully rusted corroded then direct Metal Rust Bright MRB can be used to dissolve rust particles, while in light contaminated part Metal Rust Bright MRB can be diluted in between 20 to 70% .
 
2nd factor is the time which is directly affecting the cleaning result. If base metal is aluminium then use Metals Rust Clean Bright concentration 10 to 30% for not more then 5 Minutes. For removal of rust stains on painted or iron surfaces, use 10–30%  of Metal Rust Bright MRB soultion for 15–20 minutes. And for heavily rusted and corroded or soiled surfaces and tarnish on copper and brass, use a solution of 20–50%, for 15–40 minutes.
 
The 3rd important point always be noted, After cleaning of rust from Metals Rust Clean Bright all area should be fully rinsed and clean properly with fresh water. And for best long time result to keep rust free surface, Surface can be chemically neutralized with RXSOL-41-8896-025 ( dilution ration 1 Ltr RXSOL-41-8896-025 with 10 Ltr water ). The scientific reason behind that is  As With the Rust oxide gone with Metals Rust Clean Bright, the metal surface is in direct contact with the acidic solution, and the corrosion reaction proceeds at a greater rate than it does at higher pH values. For increasing pH values greater than pH 10, the rusting rate seems to fall as pH is increased with help of RXSOL-41-8896-025.(http://www.rxmarine.com/Professional-Heavy-Duty-Alkaline-Cleaner)

Keyword:

Specially designed for removal of rust from any steel surface area and rust stain from Brass, Copper, S.S, wood, ceramic and aluminium surfaces, painted or not. And act as surface brightner. Also acts as the rustproofing agent before the application of paint or coatings. It is non-flammable. Prevents further rusting.
 

Metals Rust Clean Brighte is one of popular maintenance and cleaning chemicals in marine, shipping lines and oil field industries. You shouldn't use Acid like, vinegar, or HCl on rust to clean it because, although it initially dissolves the rust, it leaves the steel very active and prone to immediate re-rusting ("flash rusting"). What you want is Rust remover like Metals Rust Clean Bright and Rust Converter, which is phosphoric acid based detergent which has the capability of converting the dusty, flaky red rust to stable "black rust". In general Alkalis like lye also peoples are using which is good at dissolving oil and grease, but don't convert rust so metal starts immediate re-rusting.

Dont expose your precious metal parts to any chemicals, Many chemicals supplier only engaged to provide cheaper solution doesn't know chemistry of rust.  Rust Dissolving is chemicals process, Metals Clean Bright is combination of Corrosion Inhibitor, Phosphoric acid, Proprietory blend of detergent and most important things Buffer mixture which is stands to protect metal against acid attack. 

We are not only sailing product in large scale, but also building strong relation with our users. Our daily study and knowledge in chemistry given us opportunity to develop and research many new products. We are bounded to provide best product to our customer. 

We have done lots of experiment to get "pH and rust" experiment graph,  As we knows the pH indicates whether there is an excess of H+ or OH- in the solution.  And step wise we can undersatnd as follows  :
1) pH 7.0 indicating balance of H+ or OH- . 
2) pH less than 7.0 there is an excess of H+, the lower the pH, the more H+. 
3)  pH over 7.0 there is an excess of OH-, the higher the pH, the higher the OH- concentration.
 
Usually, low pH solutions, with their excess of H+, will react with iron and dissolve it, whereas high pH solutions, with their excess of OH, do not react with iron. This is general chemistry behind rust cleaning chemicals.

packaing_size:

Metals Rust Clean Bright supplier in Gandhidham ( Kandla, Mundra, Sikka ),  Mumbai ( Nhava Seva, JNPT, BPT, Navi Mumbai Maharastra ), Chennai ( Ennore, Tuticorin ), Vizag ( Visakhapatname, Gangavaram ), Kolkata - Haldia, Paradip. Fujairah, Dubai, Sharjah - Middle East - UAE, Canada

Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates