Eriochrome Black T complexometric metal indicator solution ERIOCHROME BLACK T ACS GRADE excellent quality manufacturer, exporter and supplier. Eriochrome Black T, Reagent, ACS, also known as Solochrome Black T, is a complexometric indicator used as an indicator in EDTA titration. As an ACS grade quality reagent, its chemical specifications are the de facto standards for chemicals used in many high-purity applications and typically designate the highest quality chemical available for laboratory use.
read more
By Oman Chemical Technical Team
on 25 Nov 2022
H2S vial (Bacteriological ) Kit is for checking Microbiological Quality of water. 1 PACK = 1 TEST
read more
By Oman Chemical Technical Team
on 25 Nov 2022
Reagent of Hydrazine Test Kit powder HYDRAZINE TEST POWDER TK-17 Colorimetric Procedure The objective is to maintain a hydrazine residual between 0.05-0.2 ppm depending on operating pressure and boiler designe. Actual consumption is determined under operating conditions. A normal dosage is approximately 1 ltr. per day, depending of system layout.
read more
By Oman Chemical Technical Team
on 25 Nov 2022
Passivity Test Kit This kit verifies if the surface is passive and if it will resist oxidation as requested by steel specifications for AISI 300 and 400. It can also be used to quickly separate Series 400 from Carbon steel. This test will give a red/pink result when in contact with Iron. The chemicals used in these tests are not hazardous. But the surface should be carefully rinsed after the test. Also refer this link ::: Palladium Chloride Passivation Test Kit ( http://rxmarine.com/passivation-test-kit-0 )
read more
By Oman Chemical Technical Team
on 25 Nov 2022
pHAST TEST is a ready to use surface alkalinity tester for stucco, masonry, concrete and painted surfaces. pHAST TEST is a ready-to-use surface alkalinity tester for stucco, masonry, concrete and painted surfaces. pHAST TEST is giving very quick result to find the Alkalinity.
read more
By Oman Chemical Technical Team
on 25 Nov 2022
Standard potassium iodide-iodate titrant standardized to 0.0125N . Titrate with potassium iodide-iodate titrant until end point and faint permanent blue color develops. Standard potassium iodide-iodate titrant standardized to 0.0125N Titrate with potassium iodide-iodate titrant until end point and faint permanent blue color develops. Calculation of Results FORMULA: ppm sulfite as SO3 = ml of potassium iodide-iodate (RXSOL-62-5503-006) x 500 / ml SAMPLE
read more
By Oman Chemical Technical Team
on 25 Nov 2022