Primary tabs




Product Code ::RXSOL-25-1011-010
Product Short Description: Rust and Metal Tarnish Remover Specially designed for removal of rust from any steel surface area also acts as rust proofing agent before the application of paint or coatings. It is non-flammable. Prevents further rusting.
Product Description:
It is a heavy duty and concentrated liquid blend of Acidic surfactants organic compounds containing rust penetrating agents, solubilizer and inhibitors. Acts as rustproofing agent before the application of paint or coatings. It is non-flammable. Prevents further rusting.
Product Application:

Metal Clean Britte is Cargo hold and Tank cleaning chemicals. Which is also useful products for Deck and maintenance cleaning and rust removing. 

 
Before application of Metal Clean Britte, we have to understand its cleaning principal...
 
In general terms and thumb rule for Metals Britte is MORE RUST required more Metals BritteChemically Rust { iron oxide (FeO) } is soluble in pH values below 4.0, . Thus, the oxide (oxygen) dissolves as it is formed instead of depositing on the metal's surface. So it is clear more rust required more Metal clean Britte to get dissolve. In practical if the area is fully rusted corroded then direct Metal Clean Britte can be used to dissolve rust particles, while in light contaminated part Metals Clean Britte can be diluted in between 20 to 70% .

HINTS : MORE RUST required MORE METAL CLEAN RUST DISSOLVING SOLUTION, So before uses try to remove loose RUST PARTICLE, This trick will save lot of CHEMICAL USE.
 

2nd factor is the time which is directly affecting the cleaning result. If base metal is Aluminium then use Metals Clean Britte concentration 10 to 30% for not more then 5 Minutes. For removal of rust stains on painted or iron surfaces, use 10-30%  of Metals Clean Britte soultion for 15-20 minutes. And for heavily rusted and corroded or soiled surfaces and tarnish on copper and brass, use a solution of 20-50%, for 15-40 minutes.
 
The 3rd important point always be noted, After cleaning of rust from Metals clean Britte all area should be fully rinsed and clean properly with fresh water. And for best long time result to keep rust free surface, Surface can be chemically neutralized with RXSOL-41-8896-025 ( dilution ration 1 Ltr RXSOL-41-8896-025 with 10 Ltr water ). The scientific reason behind that is  As With the Rust oxide gone with Metals Clean Britte, the metal surface is in direct contact with the acidic solution, and the corrosion reaction proceeds at a greater rate than it does at higher pH values. For increasing pH values greater than pH 10, the rusting rate seems to fall as pH is increased with help of RXSOL-41-8896-025.(http://www.rxmarine.com/Professional-Heavy-Duty-Alkaline-Cleaner)
Product Dose:
PROPERTIES
Blend of phosphoric acid in solution and surfactants.
ADR Class          : 8
Kemler                  : 80
UN No.                  : 3264
Packing Group         : III
IMDG Class : 8
Packing                      :25Ltrs
R34         : Causes burns
R36/38    : Irritating to eyes and skin.
S26         : In case of contact with eyes wash promptly with plenty               of water and seek medical advice.
S28         : In case of contact with skin, rinse immediately with plenty of water.
Product Note:

Metal Clean Britte is Cargo hold and Tank cleaning chemicals. Which is also useful products for Deck and maintenance cleaning and rust removing. 

 
Before application of Metal Clean Britte, we have to understand its cleaning principal...
 
In general terms and thumb rule for Metals Britte is MORE RUST required more Metals BritteChemically Rust { iron oxide (FeO) } is soluble in pH values below 4.0, . Thus, the oxide (oxygen) dissolves as it is formed instead of depositing on the metal's surface. So it is clear more rust required more Metal clean Britte to get dissolve. In practical if the area is fully rusted corroded then direct Metal Clean Britte can be used to dissolve rust particles, while in light contaminated part Metals Clean Britte can be diluted in between 20 to 70% .

HINTS : MORE RUST required MORE METAL CLEAN RUST DISSOLVING SOLUTION, So before uses try to remove loose RUST PARTICLE, This trick will save lot of CHEMICAL USE.
 

2nd factor is the time which is directly affecting the cleaning result. If base metal is Aluminium then use Metals Clean Britte concentration 10 to 30% for not more then 5 Minutes. For removal of rust stains on painted or iron surfaces, use 10-30%  of Metals Clean Britte soultion for 15-20 minutes. And for heavily rusted and corroded or soiled surfaces and tarnish on copper and brass, use a solution of 20-50%, for 15-40 minutes.
 
The 3rd important point always be noted, After cleaning of rust from Metals clean Britte all area should be fully rinsed and clean properly with fresh water. And for best long time result to keep rust free surface, Surface can be chemically neutralized with RXSOL-41-8896-025 ( dilution ration 1 Ltr RXSOL-41-8896-025 with 10 Ltr water ). The scientific reason behind that is  As With the Rust oxide gone with Metals Clean Britte, the metal surface is in direct contact with the acidic solution, and the corrosion reaction proceeds at a greater rate than it does at higher pH values. For increasing pH values greater than pH 10, the rusting rate seems to fall as pH is increased with help of RXSOL-41-8896-025.(http://www.rxmarine.com/Professional-Heavy-Duty-Alkaline-Cleaner)
Industrial area:
Remarks:
Other Equivalent Brand:

Metal Brite 25 Ltr, Metalbrite, Part No.651 571679, Sea Shield Nalfleet 79112

Product Tag Identification:
Product Useful Area:

Keyword:

packaing_size:

Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates