How to USE Ice Machine Cleaner?
Professionals Directions of USE:
Switch off refrigeration Unplug the SYSTEM from current and water supply. Remove excess of water from water curtain(s), water distribution tube(s) and other parts that may be scaled with deposits. Takes 100 ml of RXSOL Ice Machine Cleaner for 3 Ltr of warm water in plastic container and immerse components in solution. Soak the components until they are free of deposits; for stubborn or thick deposits use a soft brush to help the dissolving action. Use above solution to clean storage bin, top, bottom and side extrusions and other components where deposits have collected, then rinse cleaned areas with fresh water. REPEAT the process if required.
Replace cleaned components and turn on water.
To clean evaporator as well as the remaining recirculating water system, add RXSOL Ice Machine Cleaner to the water in ice maker according to the manufacturer’s instructions. If none are available, use 100 to 150 ml of RXSOL Ice Machine Cleaner in 3 Ltr water in the machine. Allow cleaning solution to circulate for up to 10-20 minutes; it may be necessary to recirculate the solution for longer than 10 minutes to remove heavier and thicker scale deposits. Be sure all distribution and weep holes are clear.
Drain cleaning solution and flush with fresh water for a minimum of 30 seconds. After flushing, plug the drain. Thoroughly rinse bin with clean water after all components are cleaned.
Return machine to service; discard first batch of ice.
How to Cleane Ice Maker Machine?
1st for Ice Maker Component Cleaning: Dip BATH process.
Takes 100 ml of RXSOL Ice Machine Cleaner for 3 Ltr of warm water in plastic container and immerse components in solution. Soak the components until they are free of deposits; for stubborn or thick deposits use a soft brush to help the dissolving action
2nd for Circulation system Cleaning: Recirculation Method.
Use 100 to 150 ml of RXSOL Ice Machine Cleaner in 3 Ltr water in the machine. Allow cleaning solution to circulate for up to 10-20 minutes; it may be necessary to recirculate the solution for longer than 10 minutes to remove heavier and thicker scale deposits. Be sure all distribution and weep holes are clear.
How Scale formed in Ice Maker Machine?
Dissolved Mineral or presence of mineral present in water is cause of SCALE FORMATION in ICE MAKER. Water tries to freeze in its pure state, while mineral present in water getting precipitate. As the cycle continues and more water is made into ice, the minerals over concentrate and eventually precipitate as a lime scale deposit.
Why Regular Cleaning of SCALE is essential from Ice Maker?
Continiue deposition of minearal scale, obstracting water flow from holes, which causes reduction of ICE HARVEST. Extra deposition of scale makes ICE MAKER jam eventually the machine will shut down. This is reason why Once the machine is scaled up, it must be cleaned.