Your shopping cart is empty.
Cleaning Methods for Green Delayed Petcoke.
Green Petcoke is a unprocessed coke fresh out of the coker, Green Petcoke also known as raw or delayed petcoke. Green delayed petcoke is high in oil content so its cleaning is different and its cleaner is also varies from ordinary pet coke remover. Green delayed petcoke stubborn also leaves stains on the surface The longer it’s left, the more difficult it becomes. As soon as possible, thoroughly remove all of the residue with a high-pressure sprayer. Some types of petcoke, like the calcined variety, are fairly dry and easily cleaned from a ship’s cargo hold. Green delayed petcoke, however, is high in oil content.
Note : Before loading of green petcoke, application of RXSOL SLIP COAT on surface is a wise decision.
Which Product is suitable to CLEAN Green Pet Coke and its residual STAIN ::: Green Petcoke Remover - RXSOL-25-2204-210
RXSOL Protective Package is all you need for applying the solutions we provide including coveralls, gloves, googles, & particulate masks.
RXSOL HOLDWASH is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for oily stains and residues, or in combination with RXSOL HOLDWASH as a barrier remover.RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination with RXSOL hold wash as a barrier remover.
FEATURES & BENEFITS :-------------------
1> Non toxic , 100% biodegradable, Environmentally friendly
2> Heavy duty Hydrocarbon remover
3> Non caustic Safe to use in occupied / covered areas
4> Safe on skin , Can be easily applied by ship's crew
5> Can be diluted to suit cleaning needs
6> Reduces turnaround times
7> using an RXSOL Application Set
Depending on contamination 50 - 200 ml per 10 litrs of water . i. e. 200 mol to a bucket of water .
Method of Application and Dose Rates:
1.Direct injection method for washing machines. Dose rate 1-5 litres per ton wash water (0.1-0.5%).
2.Recirculation method. Dose rate 1-7 litres per ton wash water (0.1-0.7%).
3.Spot cleaning. Hand spray neat or diluted with up to Five parts water and leave for several minutes before rinsing off with clean water.Cleaning of Cargo Tanks to remove Soot from Inert Gas Systems.
5.Spray RXSOL-22-2204-210 on with a high pressure cleaning machine and use1:6 with water.If used with hand sprayer,spray the product neat onto the surface,allowing1 lit.for every12 m2.Use a5-8%solution in a tank washing machine.
6.Leave for about 30-45 minutes.The surface should be kept wet.
7.Wash down with hot water (80°C) and check the cargo tank
8.Repeat the procedure if necessary.
Note: Whenever possible,the cleaning solution should be heated to 60-80°C.If this method is not possible,other conventional methods such as separate rate direct injection,recirulation or hand spraying provide acceptable options.For boiler fire side cleaning,a 10-20 % hot solution, (temp.above 40°C),should be sprayed on to the surfaces to be cleaned.Allow to penetrate for 20 minutes and flush off. For deposits which are very hard to remove, increase the concentration to 50% and repeat if necessary
The use of RXSOL-22-2204-210 in correct dosages is half the job done.
FOR HOLD CLEANING :::
For Light cleaning 10 - 50% solution with water
For Moderate deposits 50 - 75% solution with water
For Heavy deposits 75% solution with water
RXSOL HOLDWASH is a versatile, all-purpose marine cleaning solution. It effectively removes petroleum-based oily stains and residues. Also works against vegetable oils, animal fats, dirt, proteins, coal, ore, and coke.
Can be applied as a powerful stand-alone cleaner or as a barrier remover. Engineered for reliable performance in demanding marine environments.
3 Pieces of Good Advice
Apply RXSOL-22-2204-210 on dry surface where possible. A dry surface will absorb far better than a wet surface. Allow the product to soak for 10 - 30 minutes. Due to the wetting agents, emulsifier will stick to the wall longer, thereby increasing the contact time, resulting in a better cleaning effect.
When applying RXSOL-22-2204-210 on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the RXSOL-22-2204-210 may produce "channels" down the surface, thereby running too fast off the surface.
Make sure the solution on the wall doesn’t dry on the surface. Rinse the tanks by means of high pressure waterjetting. This removes the cleaning solution
including the residues.
During high pressure cleaning:It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw cleaner from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of RXSOL-22-2204-210 will give the best effect.
Features & Benefit:-
Other Valuable Hold Cleaners :::
Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020, Part No.- RXSOL-22-2202-050
Cleaning Methods for Green Delayed Petcoke
Green Petcoke, also known as Raw or Delayed Petcoke, is an unprocessed coke obtained directly from the coker. Due to its high oil content, cleaning Green Delayed Petcoke is more challenging than ordinary calcined petcoke. It often leaves stubborn, oily stains on metal surfaces that become increasingly difficult to remove over time.
To ensure proper cleaning, remove all residue immediately after discharge using a high-pressure sprayer. Unlike dry calcined petcoke, Green Petcoke requires specialized cleaning agents formulated to dissolve and emulsify oily carbon deposits effectively.
➡ Green Petcoke Remover – RXSOL-25-2204-210
A powerful cleaner designed specifically to remove green delayed petcoke residues and stubborn stains from ship cargo holds, decks, and equipment surfaces.
Before loading Green Petcoke, it is strongly recommended to apply RXSOL SLIP COAT on the cargo hold surface.
This polymer-based coating acts as a protective slip barrier, preventing direct contact between petcoke and metal surfaces, thus making post-unloading cleaning much easier.
| Purpose | Product Name | Product Code |
|---|---|---|
| Slip Barrier Coat | HOLD BLOCK | RXSOL-22-2210-210 |
| Heavy-Duty Hold Cleaner | HOLD WASH CONCENTRATE RX | RXSOL-22-2204-210 |
| Surface Protection Kit | RXSOL Protective Package | Includes Gloves, Goggles, coveralls, & particulate masks |
Safe for use on painted and coated metal surfaces
Quickly emulsifies oil, tar, and petcoke residues
Prevents corrosion and surface pitting
Suitable for marine and industrial cleaning applications
Refer this link for complete set of HOLD CLEANING KIT ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier
Green Petcoke Remover, Green Delayed Remover 714
#ShipHoldWash_India
#ShipHoldWash_UAE
#ShipHoldWash_Oman
#ShipHoldWash_Mumbai
#ShipHoldWash_Kandla
#ShipHoldWash_Gangavaram
#ShipHoldWash_Vizag
#ShipHoldWash_Chennai
#ShipHoldWash_KolkataHALDIA
#ShipHoldWash_Paradip
#ShipHoldWash_Fujairah
#ShipHoldWash_Sohar
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...