Your shopping cart is empty.
Follow the instructions of the manufacturer of blower turbines. As an indication, an average dosage for a 8,000 to 10,000 HP engine would be 0.6-0.8 dm3 of
RXSOL Turbo Cleaner Dry Walnut Shell injected daily in the blower turbine.
Instead of water, dry solid bodies in the form of granules like RXSOL Turbo Cleaner Dry Walnut Shell are used for cleaning. A certain quantity of them, depending on the turbocharger size, is blown by compressed air into the exhaust gas lines before the gas inlet casing.On account of their hardness and composition (natural solid granules size 1.3-1.7mm.) RXSOL Turbo Cleaner Dry Walnut Shell have an excellent mechanical cleaning effect (soft blast). As a rule, a turbine should be cleaned every 24 to 48 hours of operation.
RXSOL Turbo Cleaner Dry Walnut Shell is blown by compressed air into the exhaust pipes before the turbocharger. This method of cleaning should be employed every 24 -48 hours of full-load operation. The interval between cleaning operations depends on the degree of contamination and on the increase in exhaust gas temperature after the turbine. Cleaning must be repeated if the gas temperature after the turbine on full load rises to 20°C (20 K) above the mean temperature. For a turbocharger with several gas inlets, the inlets should be cleaned one after the other. On engines with several turbochargers, these should be cleaned one after the other. The gas inlet temperature before the turbine must not exceed 580-590°C (853-863 K) in order to prevent severe burning of the RXSOL Turbo Cleaner Dry Walnut Shell before the turbine. Since it is not possible to remove thick coatings with relatively small quantities of RXSOL Turbo Cleaner Dry Walnut Shell , this method must be used more frequently. Injection of the RXSOL Turbo Cleaner Dry Walnut Shell into the turbine is best performed at high turbocharger speed, to ensure effi cient mechanical cleaning.
INSTALLATIONS OF RXSOL TURBO DRY WALL NUT SHELL CLEANING SYSTEM
SUGGESTED CLEANING SYSTEM WITH RXSOL TURBO DRY WALL NUT SHELL
CLEANING PROCEDURES
For engine with several turbochargers, clean one after the other as follows:
WARNING
It may occur that, during dry cleaning of the turbine, a small part of blown-in Asteroids escapes through the chimney in singed condition.
GENERAL REGULATION
RXSOL Turbo Cleaner Dry Walnut Shell is produced from hard shells of fruit stones that have been stabilized by drying and degreasing. Ligneous residues and foreign matter such as mineral or metallic particles are eliminated. RXSOL Turbo Cleaner Dry Walnut Shell is the result of many years of practical experience in blending the raw material to achieve a highly homogeneous and efficient product. No chemicals are used in our production process. The raw materials are only treated mechanically. Hence the use of RXSOL Turbo Cleaner Dry Walnut Shell is perfectly safe and harmless. RXSOL Turbo Cleaner Dry Walnut Shell is now produced with improved particle size tolerance of Ø 1,3 to Ø 1,7 mm.
Degreaser Dry Grit manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Degreaser Dry Grit at a competitive price from us. We have ready stock of Degreaser Dry Grit in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.